mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
010aec0619
openwrt/target/linux/ar71xx/base-files/etc/uci-defaults/leds

163 lines
4.7 KiB
Plaintext
Raw Normal View History

ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
. /lib/functions/uci-defaults.sh
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
. /lib/ar71xx.sh
board=$(ar71xx_board_name)
case "$board" in
ar71xx: add support for the ALFA Network N2/N5 boards SVN-Revision: 29635
2012-01-02 03:30:25 +08:00
alfa-nx)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "wan" "WAN" "alfa:green:led_2" "eth0"
ucidef_set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1"
ar71xx: add support for the ALFA Network N2/N5 boards SVN-Revision: 29635
2012-01-02 03:30:25 +08:00
;;
add support for the Atheros AP113 reference board This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch SVN-Revision: 29935
2012-01-28 21:19:49 +08:00
ap113)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
add support for the Atheros AP113 reference board This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch SVN-Revision: 29935
2012-01-28 21:19:49 +08:00
;;
ar71xx: add default LED setup for the DB120 board SVN-Revision: 31997
2012-05-30 00:39:23 +08:00
db120)
ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
;;
add support for the Atheros AP113 reference board This reference board is equipped with: - AR7242 SoC - AR9580 on-board Wi-Fi - AR8316 switch SVN-Revision: 29935
2012-01-28 21:19:49 +08:00
rb750)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_default "act" "act" "rb750:green:act" "1"
ucidef_set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
ucidef_set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10"
ucidef_set_led_switch "port3" "port3" "rb750:green:port3" "switch0" "0x08"
ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
ar71xx: fix ethernet LEDs on the DIR-600-A1 board SVN-Revision: 29975
2012-02-01 02:37:24 +08:00
dir-600-a1|\
ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> SVN-Revision: 29973
2012-02-01 02:37:09 +08:00
dir-615-e4)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "d-link:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "d-link:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "d-link:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10"
ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> SVN-Revision: 29973
2012-02-01 02:37:09 +08:00
;;
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
dir-825-b1)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
ar71xx: add support for ALFA Network's Hornet-UB board SVN-Revision: 29535
2011-12-15 04:54:10 +08:00
hornet-ub)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
ar71xx: add support for ALFA Network's Hornet-UB board SVN-Revision: 29535
2011-12-15 04:54:10 +08:00
;;
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
mzk-w04u)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_usbdev "usb" "USB" "planex:green:usb" "1-1"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
ar71xx: preset WLAN LED config on MZK-W300NH SVN-Revision: 29896
2012-01-25 02:40:36 +08:00
mzk-w300nh)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt"
ar71xx: preset WLAN LED config on MZK-W300NH SVN-Revision: 29896
2012-01-25 02:40:36 +08:00
;;
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
nbg460n_550n_550nh)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
ar71xx: add support for the OpenMesh OM2P-LC board Patch-by: Marek Linder <marek@open-mesh.com> SVN-Revision: 32611
2012-07-05 16:26:53 +08:00
om2p | \
om2p-lc)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
ar71xx: configure default led behavior for the OM2P Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> SVN-Revision: 29394
2011-12-02 06:48:59 +08:00
;;
ar71xx: add support for TP-Link TL-MR11U Adds support for TL-MR11U, a portable router with very similar hardware to the TL-WR703N and TL-MR3020, but with an onboard 2000mAh battery. Tested, working: All interfaces (Ethernet, 802.11n, USB) WPS & Reset switches (Power appears to be a hardware slider) Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled) Sysupgrade [juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch breakage] Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com> SVN-Revision: 29972
2012-02-01 02:37:01 +08:00
tl-mr11u | \
ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. SVN-Revision: 29652
2012-01-05 01:30:49 +08:00
tl-mr3020)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ar71xx: add default LED configuration for the TL-MR3020 Also use the system LED for diagnostic. SVN-Revision: 29652
2012-01-05 01:30:49 +08:00
;;
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
tl-mr3220 | \
tl-mr3420 )
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards SVN-Revision: 29653
2012-01-05 01:30:50 +08:00
tl-wa901nd)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards SVN-Revision: 29653
2012-01-05 01:30:50 +08:00
;;
ar71xx: add user space support for the TL-WDR4300 SVN-Revision: 32460
2012-06-19 19:51:18 +08:00
tl-wdr4300)
ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1.1"
ucidef_set_led_usbdev "usb2" "USB2" "tp-link:green:usb2" "1-1.2"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt"
;;
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631
2011-12-31 23:02:46 +08:00
tl-wr741nd)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631
2011-12-31 23:02:46 +08:00
;;
tl-wr741nd-v4)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards SVN-Revision: 29631
2011-12-31 23:02:46 +08:00
;;
ar71xx: add support for the TP-Link TL-WR1041N v2 board Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31608
2012-05-06 01:02:35 +08:00
tl-wr941nd | \
tl-wr1041n-v2)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
tl-wr1043nd)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. SVN-Revision: 29680
2012-01-08 03:36:35 +08:00
tl-wr2543n)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. SVN-Revision: 29680
2012-01-08 03:36:35 +08:00
;;
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
wrt160nl)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
ar71xx: rewrite WNDR3700/3800 handling SVN-Revision: 29434
2011-12-05 21:03:54 +08:00
wndr3700)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0"
ucidef_set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards SVN-Revision: 29978
2012-02-01 04:49:34 +08:00
whr-g301n |\
whr-hp-g300n |\
whr-hp-gn)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "wan" "WAN" "buffalo:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "buffalo:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "buffalo:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10"
ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards SVN-Revision: 29978
2012-02-01 04:49:34 +08:00
;;
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
wzr-hp-g300nh)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
zcn-1523h-2)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
zcn-1523h-5)
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
ucidef_set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1"
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
;;
esac
ar71xx: use the generic uci-default functions for initial LED setup SVN-Revision: 31992
2012-05-30 00:39:17 +08:00
ucidef_commit_leds
ar71xx: combine LEDs setup in one file SVN-Revision: 28704
2011-11-01 19:20:49 +08:00
exit 0
Reference in New Issue Copy Permalink