openwrt/target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch

Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
===================================================================
--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:39:44.959158318 -0800
+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi	2015-12-18 10:43:21.000000000 -0800
@@ -15,6 +15,7 @@
 	/* these are used by bootloader for disabling nodes */
 	aliases {
 		ethernet1 = &eth1;
+		sky2 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
===================================================================
--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:39:44.959158318 -0800
+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi	2015-12-18 10:43:21.000000000 -0800
@@ -15,6 +15,7 @@
 	/* these are used by bootloader for disabling nodes */
 	aliases {
 		ethernet1 = &eth1;
+		sky2 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
imx6: fix device-tree mac address assignment for ventana sky2/eth1 Some Ventana boards have a Marvell sky2 GigE controller as eth1 however assigning the mac address through device-tree is difficult because the PCI slot can move around depending on board configuration and slot population. To work around this we add a patch to the sky2 driver to allow accessing its mac address via a device-tree alias. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48013 2015-12-28 12:56:27 +08:00			`Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi`
			`===================================================================`
			`--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi 2015-12-18 10:39:44.959158318 -0800`
			`+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi 2015-12-18 10:43:21.000000000 -0800`
			`@@ -15,6 +15,7 @@`
			`/* these are used by bootloader for disabling nodes */`
			`aliases {`
			`ethernet1 = &eth1;`
			`+ sky2 = &eth1;`
			`led0 = &led0;`
			`led1 = &led1;`
			`led2 = &led2;`
			`Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi`
			`===================================================================`
			`--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi 2015-12-18 10:39:44.959158318 -0800`
			`+++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi 2015-12-18 10:43:21.000000000 -0800`
			`@@ -15,6 +15,7 @@`
			`/* these are used by bootloader for disabling nodes */`
			`aliases {`
			`ethernet1 = &eth1;`
			`+ sky2 = &eth1;`
			`led0 = &led0;`
			`led1 = &led1;`
			`led2 = &led2;`