openwrt/target/linux/ramips/dts/MT7620a_V22SG.dts

114 lines
1.7 KiB
Plaintext
Raw Normal View History

/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a V22SG High Power evaluation board";
/*palmbus@10000000 {
};*/
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "spi";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
ralink,port-map = "llllw";
port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
gsw@10110000 {
ralink,port4 = "gmac";
};
pcie@10140000 {
status = "okay";
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
aoss {
label = "aoss";
gpios = <&gpio0 2 1>;
linux,code = <0x211>;
};
};
nand {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mtk,mt7620-nand";
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x20000>;
read-only;
};
factory: partition@60000 {
label = "factory";
reg = <0x60000 0x20000>;
read-only;
};
partition@80000 {
label = "firmware";
reg = <0x80000 0x7f80000>;
};
};
};