openwrt/target/linux/lantiq/patches-4.4/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch

--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -39,7 +39,7 @@
 /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
 
 // debugging, turns off buffer write mode if set to 1
-#define FORCE_WORD_WRITE 0
+#define FORCE_WORD_WRITE 1
 
 /* Intel chips */
 #define I82802AB	0x00ad
lantiq: Add support for linux 4.4 The following patches were dropped because they are already applied upstream: - 0038-MIPS-lantiq-fpi-on-ar9.patch - 0039-MIPS-lantiq-initialize-usb-on-boot.patch - 0042-USB-DWC2-big-endian-support.patch - 0043-gpio-stp-xway-fix-phy-mask.patch All other patches were simply refreshed, except the following: - 0001-MIPS-lantiq-add-pcie-driver.patch Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled some PMU gates for the vrx200 / VR9 SoCs) were removed since the upstream kernel disables unused PMU gates automatically (since 95135bfa7ead1becc2879230f72583dde2b71a0c "MIPS: Lantiq: Deactivate most of the devices by default"). - 0025-NET-MIPS-lantiq-adds-xrx200-net.patch Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers should use of_get_mac_address(). of_get_mac_address_mtd is not available for drivers anymore since it's called automatically within of_get_mac_address(). - 0028-NET-lantiq-various-etop-fixes.patch Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch While refreshing the kernel configuration SPI support had to be moved to config-4.4 because otherwise M25P80 was disabled. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48307 2016-01-18 19:40:19 +08:00			`--- a/drivers/mtd/chips/cfi_cmdset_0001.c`
			`+++ b/drivers/mtd/chips/cfi_cmdset_0001.c`
			`@@ -39,7 +39,7 @@`
			`/* #define CMDSET0001_DISABLE_WRITE_SUSPEND */`

			`// debugging, turns off buffer write mode if set to 1`
			`-#define FORCE_WORD_WRITE 0`
			`+#define FORCE_WORD_WRITE 1`

			`/* Intel chips */`
			`#define I82802AB 0x00ad`