openwrt/target/linux/generic/patches-3.13/770-bgmac-backport.patch

--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -23,6 +23,7 @@ config B44
 	depends on SSB_POSSIBLE && HAS_DMA
 	select SSB
 	select MII
+	select PHYLIB
 	---help---
 	  If you have a network (Ethernet) controller of this type, say Y
 	  or M and read the Ethernet-HOWTO, available from
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -96,6 +96,19 @@ static void bgmac_dma_tx_enable(struct b
 	u32 ctl;
 
 	ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL);
+	if (bgmac->core->id.rev >= 4) {
+		ctl &= ~BGMAC_DMA_TX_BL_MASK;
+		ctl |= BGMAC_DMA_TX_BL_128 << BGMAC_DMA_TX_BL_SHIFT;
+
+		ctl &= ~BGMAC_DMA_TX_MR_MASK;
+		ctl |= BGMAC_DMA_TX_MR_2 << BGMAC_DMA_TX_MR_SHIFT;
+
+		ctl &= ~BGMAC_DMA_TX_PC_MASK;
+		ctl |= BGMAC_DMA_TX_PC_16 << BGMAC_DMA_TX_PC_SHIFT;
+
+		ctl &= ~BGMAC_DMA_TX_PT_MASK;
+		ctl |= BGMAC_DMA_TX_PT_8 << BGMAC_DMA_TX_PT_SHIFT;
+	}
 	ctl |= BGMAC_DMA_TX_ENABLE;
 	ctl |= BGMAC_DMA_TX_PARITY_DISABLE;
 	bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
@@ -240,6 +253,16 @@ static void bgmac_dma_rx_enable(struct b
 	u32 ctl;
 
 	ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
+	if (bgmac->core->id.rev >= 4) {
+		ctl &= ~BGMAC_DMA_RX_BL_MASK;
+		ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT;
+
+		ctl &= ~BGMAC_DMA_RX_PC_MASK;
+		ctl |= BGMAC_DMA_RX_PC_8 << BGMAC_DMA_RX_PC_SHIFT;
+
+		ctl &= ~BGMAC_DMA_RX_PT_MASK;
+		ctl |= BGMAC_DMA_RX_PT_1 << BGMAC_DMA_RX_PT_SHIFT;
+	}
 	ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
 	ctl |= BGMAC_DMA_RX_ENABLE;
 	ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
@@ -682,70 +705,6 @@ static int bgmac_phy_write(struct bgmac
 	return 0;
 }
 
-/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */
-static void bgmac_phy_force(struct bgmac *bgmac)
-{
-	u16 ctl;
-	u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB |
-		     BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX);
-
-	if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
-		return;
-
-	if (bgmac->autoneg)
-		return;
-
-	ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL);
-	ctl &= mask;
-	if (bgmac->full_duplex)
-		ctl |= BGMAC_PHY_CTL_DUPLEX;
-	if (bgmac->speed == BGMAC_SPEED_100)
-		ctl |= BGMAC_PHY_CTL_SPEED_100;
-	else if (bgmac->speed == BGMAC_SPEED_1000)
-		ctl |= BGMAC_PHY_CTL_SPEED_1000;
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl);
-}
-
-/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */
-static void bgmac_phy_advertise(struct bgmac *bgmac)
-{
-	u16 adv;
-
-	if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
-		return;
-
-	if (!bgmac->autoneg)
-		return;
-
-	/* Adv selected 10/100 speeds */
-	adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV);
-	adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL |
-		 BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL);
-	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
-		adv |= BGMAC_PHY_ADV_10HALF;
-	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
-		adv |= BGMAC_PHY_ADV_100HALF;
-	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
-		adv |= BGMAC_PHY_ADV_10FULL;
-	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
-		adv |= BGMAC_PHY_ADV_100FULL;
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv);
-
-	/* Adv selected 1000 speeds */
-	adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2);
-	adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL);
-	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
-		adv |= BGMAC_PHY_ADV2_1000HALF;
-	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
-		adv |= BGMAC_PHY_ADV2_1000FULL;
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv);
-
-	/* Restart */
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
-			bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) |
-			BGMAC_PHY_CTL_RESTART);
-}
-
 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
 static void bgmac_phy_init(struct bgmac *bgmac)
 {
@@ -789,11 +748,9 @@ static void bgmac_phy_reset(struct bgmac
 	if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
 		return;
 
-	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
-			BGMAC_PHY_CTL_RESET);
+	bgmac_phy_write(bgmac, bgmac->phyaddr, MII_BMCR, BMCR_RESET);
 	udelay(100);
-	if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) &
-	    BGMAC_PHY_CTL_RESET)
+	if (bgmac_phy_read(bgmac, bgmac->phyaddr, MII_BMCR) & BMCR_RESET)
 		bgmac_err(bgmac, "PHY reset failed\n");
 	bgmac_phy_init(bgmac);
 }
@@ -811,13 +768,13 @@ static void bgmac_cmdcfg_maskset(struct
 	u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
 	u32 new_val = (cmdcfg & mask) | set;
 
-	bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR);
+	bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR(bgmac->core->id.rev));
 	udelay(2);
 
 	if (new_val != cmdcfg || force)
 		bgmac_write(bgmac, BGMAC_CMDCFG, new_val);
 
-	bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR);
+	bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR(bgmac->core->id.rev));
 	udelay(2);
 }
 
@@ -876,31 +833,56 @@ static void bgmac_clear_mib(struct bgmac
 }
 
 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
-static void bgmac_speed(struct bgmac *bgmac, int speed)
+static void bgmac_mac_speed(struct bgmac *bgmac)
 {
 	u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD);
 	u32 set = 0;
 
-	if (speed & BGMAC_SPEED_10)
+	switch (bgmac->mac_speed) {
+	case SPEED_10:
 		set |= BGMAC_CMDCFG_ES_10;
-	if (speed & BGMAC_SPEED_100)
+		break;
+	case SPEED_100:
 		set |= BGMAC_CMDCFG_ES_100;
-	if (speed & BGMAC_SPEED_1000)
+		break;
+	case SPEED_1000:
 		set |= BGMAC_CMDCFG_ES_1000;
-	if (!bgmac->full_duplex)
+		break;
+	case SPEED_2500:
+		set |= BGMAC_CMDCFG_ES_2500;
+		break;
+	default:
+		bgmac_err(bgmac, "Unsupported speed: %d\n", bgmac->mac_speed);
+	}
+
+	if (bgmac->mac_duplex == DUPLEX_HALF)
 		set |= BGMAC_CMDCFG_HD;
+
 	bgmac_cmdcfg_maskset(bgmac, mask, set, true);
 }
 
 static void bgmac_miiconfig(struct bgmac *bgmac)
 {
-	u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
-			BGMAC_DS_MM_SHIFT;
-	if (imode == 0 || imode == 1) {
-		if (bgmac->autoneg)
-			bgmac_speed(bgmac, BGMAC_SPEED_100);
-		else
-			bgmac_speed(bgmac, bgmac->speed);
+	struct bcma_device *core = bgmac->core;
+	struct bcma_chipinfo *ci = &core->bus->chipinfo;
+	u8 imode;
+
+	if (ci->id == BCMA_CHIP_ID_BCM4707 ||
+	    ci->id == BCMA_CHIP_ID_BCM53018) {
+		bcma_awrite32(core, BCMA_IOCTL,
+			      bcma_aread32(core, BCMA_IOCTL) | 0x40 |
+			      BGMAC_BCMA_IOCTL_SW_CLKEN);
+		bgmac->mac_speed = SPEED_2500;
+		bgmac->mac_duplex = DUPLEX_FULL;
+		bgmac_mac_speed(bgmac);
+	} else {
+		imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) &
+			BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT;
+		if (imode == 0 || imode == 1) {
+			bgmac->mac_speed = SPEED_100;
+			bgmac->mac_duplex = DUPLEX_FULL;
+			bgmac_mac_speed(bgmac);
+		}
 	}
 }
 
@@ -910,7 +892,7 @@ static void bgmac_chip_reset(struct bgma
 	struct bcma_device *core = bgmac->core;
 	struct bcma_bus *bus = core->bus;
 	struct bcma_chipinfo *ci = &bus->chipinfo;
-	u32 flags = 0;
+	u32 flags;
 	u32 iost;
 	int i;
 
@@ -933,26 +915,36 @@ static void bgmac_chip_reset(struct bgma
 	}
 
 	iost = bcma_aread32(core, BCMA_IOST);
-	if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) ||
+	if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
 	    (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
-	    (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9))
+	    (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188))
 		iost &= ~BGMAC_BCMA_IOST_ATTACHED;
 
-	if (iost & BGMAC_BCMA_IOST_ATTACHED) {
-		flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
-		if (!bgmac->has_robosw)
-			flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+	/* 3GMAC: for BCM4707, only do core reset at bgmac_probe() */
+	if (ci->id != BCMA_CHIP_ID_BCM4707) {
+		flags = 0;
+		if (iost & BGMAC_BCMA_IOST_ATTACHED) {
+			flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
+			if (!bgmac->has_robosw)
+				flags |= BGMAC_BCMA_IOCTL_SW_RESET;
+		}
+		bcma_core_enable(core, flags);
 	}
 
-	bcma_core_enable(core, flags);
-
-	if (core->id.rev > 2) {
-		bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8);
-		bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24,
+	/* Request Misc PLL for corerev > 2 */
+	if (core->id.rev > 2 &&
+	    ci->id != BCMA_CHIP_ID_BCM4707 &&
+	    ci->id != BCMA_CHIP_ID_BCM53018) {
+		bgmac_set(bgmac, BCMA_CLKCTLST,
+			  BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ);
+		bgmac_wait_value(bgmac->core, BCMA_CLKCTLST,
+				 BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
+				 BGMAC_BCMA_CLKCTLST_MISC_PLL_ST,
 				 1000);
 	}
 
-	if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 ||
+	if (ci->id == BCMA_CHIP_ID_BCM5357 ||
+	    ci->id == BCMA_CHIP_ID_BCM4749 ||
 	    ci->id == BCMA_CHIP_ID_BCM53572) {
 		struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
 		u8 et_swtype = 0;
@@ -967,10 +959,11 @@ static void bgmac_chip_reset(struct bgma
 			et_swtype &= 0x0f;
 			et_swtype <<= 4;
 			sw_type = et_swtype;
-		} else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) {
+		} else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM5358) {
 			sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
-		} else if ((ci->id != BCMA_CHIP_ID_BCM53572 && ci->pkg == 10) ||
-			   (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) {
+		} else if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == BCMA_PKG_ID_BCM47186) ||
+			   (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
+			   (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == BCMA_PKG_ID_BCM47188)) {
 			sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII |
 				  BGMAC_CHIPCTL_1_SW_TYPE_RGMII;
 		}
@@ -1007,8 +1000,10 @@ static void bgmac_chip_reset(struct bgma
 			     BGMAC_CMDCFG_PROM |
 			     BGMAC_CMDCFG_NLC |
 			     BGMAC_CMDCFG_CFE |
-			     BGMAC_CMDCFG_SR,
+			     BGMAC_CMDCFG_SR(core->id.rev),
 			     false);
+	bgmac->mac_speed = SPEED_UNKNOWN;
+	bgmac->mac_duplex = DUPLEX_UNKNOWN;
 
 	bgmac_clear_mib(bgmac);
 	if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
@@ -1048,7 +1043,7 @@ static void bgmac_enable(struct bgmac *b
 
 	cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
 	bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE),
-			     BGMAC_CMDCFG_SR, true);
+			     BGMAC_CMDCFG_SR(bgmac->core->id.rev), true);
 	udelay(2);
 	cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE;
 	bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg);
@@ -1077,12 +1072,16 @@ static void bgmac_enable(struct bgmac *b
 		break;
 	}
 
-	rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
-	rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
-	bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
-	mdp = (bp_clk * 128 / 1000) - 3;
-	rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
-	bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
+	if (ci->id != BCMA_CHIP_ID_BCM4707 &&
+	    ci->id != BCMA_CHIP_ID_BCM53018) {
+		rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
+		rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
+		bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) /
+				1000000;
+		mdp = (bp_clk * 128 / 1000) - 3;
+		rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
+		bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
+	}
 }
 
 /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
@@ -1108,13 +1107,6 @@ static void bgmac_chip_init(struct bgmac
 
 	bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
 
-	if (!bgmac->autoneg) {
-		bgmac_speed(bgmac, bgmac->speed);
-		bgmac_phy_force(bgmac);
-	} else if (bgmac->speed) { /* if there is anything to adv */
-		bgmac_phy_advertise(bgmac);
-	}
-
 	if (full_init) {
 		bgmac_dma_init(bgmac);
 		if (1) /* FIXME: is there any case we don't want IRQs? */
@@ -1204,6 +1196,8 @@ static int bgmac_open(struct net_device
 	}
 	napi_enable(&bgmac->napi);
 
+	phy_start(bgmac->phy_dev);
+
 	netif_carrier_on(net_dev);
 
 err_out:
@@ -1216,6 +1210,8 @@ static int bgmac_stop(struct net_device
 
 	netif_carrier_off(net_dev);
 
+	phy_stop(bgmac->phy_dev);
+
 	napi_disable(&bgmac->napi);
 	bgmac_chip_intrs_off(bgmac);
 	free_irq(bgmac->core->irq, net_dev);
@@ -1252,27 +1248,11 @@ static int bgmac_set_mac_address(struct
 static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
 {
 	struct bgmac *bgmac = netdev_priv(net_dev);
-	struct mii_ioctl_data *data = if_mii(ifr);
 
-	switch (cmd) {
-	case SIOCGMIIPHY:
-		data->phy_id = bgmac->phyaddr;
-		/* fallthru */
-	case SIOCGMIIREG:
-		if (!netif_running(net_dev))
-			return -EAGAIN;
-		data->val_out = bgmac_phy_read(bgmac, data->phy_id,
-					       data->reg_num & 0x1f);
-		return 0;
-	case SIOCSMIIREG:
-		if (!netif_running(net_dev))
-			return -EAGAIN;
-		bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f,
-				data->val_in);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
+	if (!netif_running(net_dev))
+		return -EINVAL;
+
+	return phy_mii_ioctl(bgmac->phy_dev, ifr, cmd);
 }
 
 static const struct net_device_ops bgmac_netdev_ops = {
@@ -1294,61 +1274,16 @@ static int bgmac_get_settings(struct net
 {
 	struct bgmac *bgmac = netdev_priv(net_dev);
 
-	cmd->supported = SUPPORTED_10baseT_Half |
-			 SUPPORTED_10baseT_Full |
-			 SUPPORTED_100baseT_Half |
-			 SUPPORTED_100baseT_Full |
-			 SUPPORTED_1000baseT_Half |
-			 SUPPORTED_1000baseT_Full |
-			 SUPPORTED_Autoneg;
-
-	if (bgmac->autoneg) {
-		WARN_ON(cmd->advertising);
-		if (bgmac->full_duplex) {
-			if (bgmac->speed & BGMAC_SPEED_10)
-				cmd->advertising |= ADVERTISED_10baseT_Full;
-			if (bgmac->speed & BGMAC_SPEED_100)
-				cmd->advertising |= ADVERTISED_100baseT_Full;
-			if (bgmac->speed & BGMAC_SPEED_1000)
-				cmd->advertising |= ADVERTISED_1000baseT_Full;
-		} else {
-			if (bgmac->speed & BGMAC_SPEED_10)
-				cmd->advertising |= ADVERTISED_10baseT_Half;
-			if (bgmac->speed & BGMAC_SPEED_100)
-				cmd->advertising |= ADVERTISED_100baseT_Half;
-			if (bgmac->speed & BGMAC_SPEED_1000)
-				cmd->advertising |= ADVERTISED_1000baseT_Half;
-		}
-	} else {
-		switch (bgmac->speed) {
-		case BGMAC_SPEED_10:
-			ethtool_cmd_speed_set(cmd, SPEED_10);
-			break;
-		case BGMAC_SPEED_100:
-			ethtool_cmd_speed_set(cmd, SPEED_100);
-			break;
-		case BGMAC_SPEED_1000:
-			ethtool_cmd_speed_set(cmd, SPEED_1000);
-			break;
-		}
-	}
-
-	cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-
-	cmd->autoneg = bgmac->autoneg;
-
-	return 0;
+	return phy_ethtool_gset(bgmac->phy_dev, cmd);
 }
 
-#if 0
 static int bgmac_set_settings(struct net_device *net_dev,
 			      struct ethtool_cmd *cmd)
 {
 	struct bgmac *bgmac = netdev_priv(net_dev);
 
-	return -1;
+	return phy_ethtool_sset(bgmac->phy_dev, cmd);
 }
-#endif
 
 static void bgmac_get_drvinfo(struct net_device *net_dev,
 			      struct ethtool_drvinfo *info)
@@ -1359,6 +1294,7 @@ static void bgmac_get_drvinfo(struct net
 
 static const struct ethtool_ops bgmac_ethtool_ops = {
 	.get_settings		= bgmac_get_settings,
+	.set_settings		= bgmac_set_settings,
 	.get_drvinfo		= bgmac_get_drvinfo,
 };
 
@@ -1377,9 +1313,35 @@ static int bgmac_mii_write(struct mii_bu
 	return bgmac_phy_write(bus->priv, mii_id, regnum, value);
 }
 
+static void bgmac_adjust_link(struct net_device *net_dev)
+{
+	struct bgmac *bgmac = netdev_priv(net_dev);
+	struct phy_device *phy_dev = bgmac->phy_dev;
+	bool update = false;
+
+	if (phy_dev->link) {
+		if (phy_dev->speed != bgmac->mac_speed) {
+			bgmac->mac_speed = phy_dev->speed;
+			update = true;
+		}
+
+		if (phy_dev->duplex != bgmac->mac_duplex) {
+			bgmac->mac_duplex = phy_dev->duplex;
+			update = true;
+		}
+	}
+
+	if (update) {
+		bgmac_mac_speed(bgmac);
+		phy_print_status(phy_dev);
+	}
+}
+
 static int bgmac_mii_register(struct bgmac *bgmac)
 {
 	struct mii_bus *mii_bus;
+	struct phy_device *phy_dev;
+	char bus_id[MII_BUS_ID_SIZE + 3];
 	int i, err = 0;
 
 	mii_bus = mdiobus_alloc();
@@ -1411,8 +1373,22 @@ static int bgmac_mii_register(struct bgm
 
 	bgmac->mii_bus = mii_bus;
 
+	/* Connect to the PHY */
+	snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id,
+		 bgmac->phyaddr);
+	phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
+			      PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(phy_dev)) {
+		bgmac_err(bgmac, "PHY connecton failed\n");
+		err = PTR_ERR(phy_dev);
+		goto err_unregister_bus;
+	}
+	bgmac->phy_dev = phy_dev;
+
 	return err;
 
+err_unregister_bus:
+	mdiobus_unregister(mii_bus);
 err_free_irq:
 	kfree(mii_bus->irq);
 err_free_bus:
@@ -1467,9 +1443,6 @@ static int bgmac_probe(struct bcma_devic
 	bcma_set_drvdata(core, bgmac);
 
 	/* Defaults */
-	bgmac->autoneg = true;
-	bgmac->full_duplex = true;
-	bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000;
 	memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
 
 	/* On BCM4706 we need common core to access PHY */
@@ -1500,6 +1473,27 @@ static int bgmac_probe(struct bcma_devic
 
 	bgmac_chip_reset(bgmac);
 
+	/* For Northstar, we have to take all GMAC core out of reset */
+	if (core->id.id == BCMA_CHIP_ID_BCM4707 ||
+	    core->id.id == BCMA_CHIP_ID_BCM53018) {
+		struct bcma_device *ns_core;
+		int ns_gmac;
+
+		/* Northstar has 4 GMAC cores */
+		for (ns_gmac = 0; ns_gmac < 4; ns_gmac++) {
+			/* As Northstar requirement, we have to reset all GMACs
+			 * before accessing one. bgmac_chip_reset() call
+			 * bcma_core_enable() for this core. Then the other
+			 * three GMACs didn't reset.  We do it here.
+			 */
+			ns_core = bcma_find_core_unit(core->bus,
+						      BCMA_CORE_MAC_GBIT,
+						      ns_gmac);
+			if (ns_core && !bcma_core_is_enabled(ns_core))
+				bcma_core_enable(ns_core, 0);
+		}
+	}
+
 	err = bgmac_dma_alloc(bgmac);
 	if (err) {
 		bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
@@ -1524,14 +1518,12 @@ static int bgmac_probe(struct bcma_devic
 	err = bgmac_mii_register(bgmac);
 	if (err) {
 		bgmac_err(bgmac, "Cannot register MDIO\n");
-		err = -ENOTSUPP;
 		goto err_dma_free;
 	}
 
 	err = register_netdev(bgmac->net_dev);
 	if (err) {
 		bgmac_err(bgmac, "Cannot register net device\n");
-		err = -ENOTSUPP;
 		goto err_mii_unregister;
 	}
 
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -95,7 +95,11 @@
 #define  BGMAC_RXQ_CTL_MDP_SHIFT		24
 #define BGMAC_GPIO_SELECT			0x194
 #define BGMAC_GPIO_OUTPUT_EN			0x198
-/* For 0x1e0 see BCMA_CLKCTLST */
+
+/* For 0x1e0 see BCMA_CLKCTLST. Below are BGMAC specific bits */
+#define  BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ	0x00000100
+#define  BGMAC_BCMA_CLKCTLST_MISC_PLL_ST	0x01000000
+
 #define BGMAC_HW_WAR				0x1e4
 #define BGMAC_PWR_CTL				0x1e8
 #define BGMAC_DMA_BASE0				0x200		/* Tx and Rx controller */
@@ -185,6 +189,7 @@
 #define   BGMAC_CMDCFG_ES_10			0x00000000
 #define   BGMAC_CMDCFG_ES_100			0x00000004
 #define   BGMAC_CMDCFG_ES_1000			0x00000008
+#define   BGMAC_CMDCFG_ES_2500			0x0000000C
 #define  BGMAC_CMDCFG_PROM			0x00000010	/* Set to activate promiscuous mode */
 #define  BGMAC_CMDCFG_PAD_EN			0x00000020
 #define  BGMAC_CMDCFG_CF			0x00000040
@@ -193,7 +198,9 @@
 #define  BGMAC_CMDCFG_TAI			0x00000200
 #define  BGMAC_CMDCFG_HD			0x00000400	/* Set if in half duplex mode */
 #define  BGMAC_CMDCFG_HD_SHIFT			10
-#define  BGMAC_CMDCFG_SR			0x00000800	/* Set to reset mode */
+#define  BGMAC_CMDCFG_SR_REV0			0x00000800	/* Set to reset mode, for other revs */
+#define  BGMAC_CMDCFG_SR_REV4			0x00002000	/* Set to reset mode, only for core rev 4 */
+#define  BGMAC_CMDCFG_SR(rev)  ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0)
 #define  BGMAC_CMDCFG_ML			0x00008000	/* Set to activate mac loopback mode */
 #define  BGMAC_CMDCFG_AE			0x00400000
 #define  BGMAC_CMDCFG_CFE			0x00800000
@@ -216,27 +223,6 @@
 #define BGMAC_RX_STATUS				0xb38
 #define BGMAC_TX_STATUS				0xb3c
 
-#define BGMAC_PHY_CTL				0x00
-#define  BGMAC_PHY_CTL_SPEED_MSB		0x0040
-#define  BGMAC_PHY_CTL_DUPLEX			0x0100		/* duplex mode */
-#define  BGMAC_PHY_CTL_RESTART			0x0200		/* restart autonegotiation */
-#define  BGMAC_PHY_CTL_ANENAB			0x1000		/* enable autonegotiation */
-#define  BGMAC_PHY_CTL_SPEED			0x2000
-#define  BGMAC_PHY_CTL_LOOP			0x4000		/* loopback */
-#define  BGMAC_PHY_CTL_RESET			0x8000		/* reset */
-/* Helpers */
-#define  BGMAC_PHY_CTL_SPEED_10			0
-#define  BGMAC_PHY_CTL_SPEED_100		BGMAC_PHY_CTL_SPEED
-#define  BGMAC_PHY_CTL_SPEED_1000		BGMAC_PHY_CTL_SPEED_MSB
-#define BGMAC_PHY_ADV				0x04
-#define  BGMAC_PHY_ADV_10HALF			0x0020		/* advertise 10MBits/s half duplex */
-#define  BGMAC_PHY_ADV_10FULL			0x0040		/* advertise 10MBits/s full duplex */
-#define  BGMAC_PHY_ADV_100HALF			0x0080		/* advertise 100MBits/s half duplex */
-#define  BGMAC_PHY_ADV_100FULL			0x0100		/* advertise 100MBits/s full duplex */
-#define BGMAC_PHY_ADV2				0x09
-#define  BGMAC_PHY_ADV2_1000HALF		0x0100		/* advertise 1000MBits/s half duplex */
-#define  BGMAC_PHY_ADV2_1000FULL		0x0200		/* advertise 1000MBits/s full duplex */
-
 /* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */
 #define BGMAC_BCMA_IOCTL_SW_CLKEN		0x00000004	/* PHY Clock Enable */
 #define BGMAC_BCMA_IOCTL_SW_RESET		0x00000008	/* PHY Reset */
@@ -254,9 +240,34 @@
 #define  BGMAC_DMA_TX_SUSPEND			0x00000002
 #define  BGMAC_DMA_TX_LOOPBACK			0x00000004
 #define  BGMAC_DMA_TX_FLUSH			0x00000010
+#define  BGMAC_DMA_TX_MR_MASK			0x000000C0	/* Multiple outstanding reads */
+#define  BGMAC_DMA_TX_MR_SHIFT			6
+#define   BGMAC_DMA_TX_MR_1			0
+#define   BGMAC_DMA_TX_MR_2			1
 #define  BGMAC_DMA_TX_PARITY_DISABLE		0x00000800
 #define  BGMAC_DMA_TX_ADDREXT_MASK		0x00030000
 #define  BGMAC_DMA_TX_ADDREXT_SHIFT		16
+#define  BGMAC_DMA_TX_BL_MASK			0x001C0000	/* BurstLen bits */
+#define  BGMAC_DMA_TX_BL_SHIFT			18
+#define   BGMAC_DMA_TX_BL_16			0
+#define   BGMAC_DMA_TX_BL_32			1
+#define   BGMAC_DMA_TX_BL_64			2
+#define   BGMAC_DMA_TX_BL_128			3
+#define   BGMAC_DMA_TX_BL_256			4
+#define   BGMAC_DMA_TX_BL_512			5
+#define   BGMAC_DMA_TX_BL_1024			6
+#define  BGMAC_DMA_TX_PC_MASK			0x00E00000	/* Prefetch control */
+#define  BGMAC_DMA_TX_PC_SHIFT			21
+#define   BGMAC_DMA_TX_PC_0			0
+#define   BGMAC_DMA_TX_PC_4			1
+#define   BGMAC_DMA_TX_PC_8			2
+#define   BGMAC_DMA_TX_PC_16			3
+#define  BGMAC_DMA_TX_PT_MASK			0x03000000	/* Prefetch threshold */
+#define  BGMAC_DMA_TX_PT_SHIFT			24
+#define   BGMAC_DMA_TX_PT_1			0
+#define   BGMAC_DMA_TX_PT_2			1
+#define   BGMAC_DMA_TX_PT_4			2
+#define   BGMAC_DMA_TX_PT_8			3
 #define BGMAC_DMA_TX_INDEX			0x04
 #define BGMAC_DMA_TX_RINGLO			0x08
 #define BGMAC_DMA_TX_RINGHI			0x0C
@@ -284,8 +295,33 @@
 #define  BGMAC_DMA_RX_DIRECT_FIFO		0x00000100
 #define  BGMAC_DMA_RX_OVERFLOW_CONT		0x00000400
 #define  BGMAC_DMA_RX_PARITY_DISABLE		0x00000800
+#define  BGMAC_DMA_RX_MR_MASK			0x000000C0	/* Multiple outstanding reads */
+#define  BGMAC_DMA_RX_MR_SHIFT			6
+#define   BGMAC_DMA_TX_MR_1			0
+#define   BGMAC_DMA_TX_MR_2			1
 #define  BGMAC_DMA_RX_ADDREXT_MASK		0x00030000
 #define  BGMAC_DMA_RX_ADDREXT_SHIFT		16
+#define  BGMAC_DMA_RX_BL_MASK			0x001C0000	/* BurstLen bits */
+#define  BGMAC_DMA_RX_BL_SHIFT			18
+#define   BGMAC_DMA_RX_BL_16			0
+#define   BGMAC_DMA_RX_BL_32			1
+#define   BGMAC_DMA_RX_BL_64			2
+#define   BGMAC_DMA_RX_BL_128			3
+#define   BGMAC_DMA_RX_BL_256			4
+#define   BGMAC_DMA_RX_BL_512			5
+#define   BGMAC_DMA_RX_BL_1024			6
+#define  BGMAC_DMA_RX_PC_MASK			0x00E00000	/* Prefetch control */
+#define  BGMAC_DMA_RX_PC_SHIFT			21
+#define   BGMAC_DMA_RX_PC_0			0
+#define   BGMAC_DMA_RX_PC_4			1
+#define   BGMAC_DMA_RX_PC_8			2
+#define   BGMAC_DMA_RX_PC_16			3
+#define  BGMAC_DMA_RX_PT_MASK			0x03000000	/* Prefetch threshold */
+#define  BGMAC_DMA_RX_PT_SHIFT			24
+#define   BGMAC_DMA_RX_PT_1			0
+#define   BGMAC_DMA_RX_PT_2			1
+#define   BGMAC_DMA_RX_PT_4			2
+#define   BGMAC_DMA_RX_PT_8			3
 #define BGMAC_DMA_RX_INDEX			0x24
 #define BGMAC_DMA_RX_RINGLO			0x28
 #define BGMAC_DMA_RX_RINGHI			0x2C
@@ -342,10 +378,6 @@
 #define BGMAC_CHIPCTL_1_SW_TYPE_RGMII		0x000000C0
 #define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS		0x00010000
 
-#define BGMAC_SPEED_10				0x0001
-#define BGMAC_SPEED_100				0x0002
-#define BGMAC_SPEED_1000			0x0004
-
 #define BGMAC_WEIGHT	64
 
 #define ETHER_MAX_LEN   1518
@@ -402,6 +434,7 @@ struct bgmac {
 	struct net_device *net_dev;
 	struct napi_struct napi;
 	struct mii_bus *mii_bus;
+	struct phy_device *phy_dev;
 
 	/* DMA */
 	struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];
@@ -416,10 +449,9 @@ struct bgmac {
 	u32 int_mask;
 	u32 int_status;
 
-	/* Speed-related */
-	int speed;
-	bool autoneg;
-	bool full_duplex;
+	/* Current MAC state */
+	int mac_speed;
+	int mac_duplex;
 
 	u8 phyaddr;
 	bool has_robosw;