openwrt/target/linux/ramips/dts/WLI-TX4-AG300N.dts

/dts-v1/;

/include/ "rt2880.dtsi"

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
	model = "Buffalo WLI-TX4-AG300N";

	palmbus@300000 {
		sysc@0 {
			ralink,pinmux = "uartlite";
			ralink,uartmux = "gpio";
			ralink,wdtmux = <1>;
		};

		gpio0: gpio@600 {
			status = "okay";
		};
	};

	cfi@1f000000 {
		compatible = "cfi-flash";
		reg = <0x1f000000 0x800000>;

		bank-width = <2>;
		device-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "uboot";
			reg = <0x0 0x30000>;
			read-only;
		};
		partition@30000 {
			label = "uboot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};
		partition@40000 {
			label = "calibration";
			reg = <0x40000 0x10000>;
			read-only;
		};
		partition@50000 {
			label = "linux";
			reg = <0x50000 0x3b0000>;
		};
	};

	ethernet@400000 {
		status = "okay";

                port@0 {
			ralink,fixed-link = <1000 1 1 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;
		wps {
			label = "wps";
			gpios = <&gpio0 0 1>;
			linux,code = <0x211>;
		};
		bandwidth {
			label = "bandwidth";
			gpios = <&gpio0 8 0>;
			linux,code = <0x198>;
		};
		reset {
			label = "reset";
			gpios = <&gpio0 9 1>;
			linux,code = <0x198>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		diag {
			label = "buffalo:red:diag";
			gpios = <&gpio0 10 1>;
		};
		power {
			label = "buffalo:blue:power";
			gpios = <&gpio0 12 1>;
		};
		security {
			label = "buffalo:blue:security";
			gpios = <&gpio0 13 1>;
		};
	};
};