mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
6e65576f2d
openwrt/target/linux/ipq806x/Makefile

27 lines
684 B
Makefile
Raw Normal View History

ipq806x: Add support for IPQ806x chip family Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 42334
2014-08-30 17:32:58 +08:00
# Copyright (c) 2013 The Linux Foundation. All rights reserved.
#
include $(TOPDIR)/rules.mk
ARCH:=arm
BOARD:=ipq806x
BOARDNAME:=Qualcomm Atheros IPQ806X
ipq806x: enable fpu Enable hardfloat to use all the cpu power Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-05-08 05:22:37 +08:00
FEATURES:=squashfs nand ubifs fpu
ipq806x: change compiler flags to arm cortex-a15 Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
2016-07-13 17:20:19 +08:00
CPU_TYPE:=cortex-a15
ipq806x: enable vfpv4 support and set cpu type to cortex-a9 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47468
2015-11-14 22:22:24 +08:00
CPU_SUBTYPE:=neon-vfpv4
global: change my email address Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 15:06:21 +08:00
MAINTAINER:=John Crispin <john@phrozen.org>
ipq806x: Add support for IPQ806x chip family Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 42334
2014-08-30 17:32:58 +08:00
ipg806x: set v4.4 as default Signed-off-by: John Crispin <john@phrozen.org>
2016-06-08 02:33:35 +08:00
KERNEL_PATCHVER:=4.4
ipq806x: Add support for IPQ806x chip family Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 42334
2014-08-30 17:32:58 +08:00
ipq806x: add support for zImage kernel This change enable zImage+appended dtb support in ipq806x kernel options. The zImage will now be generated as part of the kernel binaries. Platforms which do not have DT support enabled in U-boot can now make use of it by generating zImage files and appending dtb to it. It is not used yet but it is done as a stepping stone for early IPQ806x platforms, which did not include DT support in U-boot. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45662
2015-05-10 19:47:02 +08:00
KERNELNAME:=zImage Image dtbs
ipq806x: Add support for IPQ806x chip family Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 42334
2014-08-30 17:32:58 +08:00
include $(INCLUDE_DIR)/target.mk
ipq806x: add default package selection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44523
2015-02-24 20:00:09 +08:00
DEFAULT_PACKAGES += \
ipq806x: move stmmac support in the kernel binary Ethernet GMAC is built-in the SoC, so there is no need to enable it as a module. We'll just assume we need it. That's what is done for other platform where this driver is used so it'll make things more consistent. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45871
2015-06-02 04:11:35 +08:00
kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
ipq806x: Add support for linux-4.4 1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
2016-05-21 17:18:31 +08:00
kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform \
switch to the new usbport LED trigger This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 18:09:45 +08:00
kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
ipq806x: Add support for linux-4.4 1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
2016-05-21 17:18:31 +08:00
kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
ipq806x: move ath10k firmware selection into device profiles Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-21 17:52:52 +08:00
kmod-ath10k wpad-mini \
uboot-envtools: add ipq806x support Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-08 01:19:01 +08:00
uboot-envtools
ipq806x: Add support for IPQ806x chip family Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 42334
2014-08-30 17:32:58 +08:00
$(eval $(call BuildTarget))
Reference in New Issue Copy Permalink