openwrt/package/network/utils/iw/patches/001-nl80211_h_sync.patch

--- a/nl80211.h
+++ b/nl80211.h
@@ -303,8 +303,9 @@
  *	passed, all channels allowed for the current regulatory domain
  *	are used.  Extra IEs can also be passed from the userspace by
  *	using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
- *	if scheduled scan is not running.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ *	scheduled scan is not running. The caller may assume that as soon
+ *	as the call returns, it is safe to start a new scheduled scan again.
  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
  *	results available.
  * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
@@ -418,8 +419,18 @@
  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
  *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
  *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
+ *	%NL80211_ATTR_WIPHY_FREQ_HINT.
+ *	If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
+ *	restrictions on BSS selection, i.e., they effectively prevent roaming
+ *	within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
+ *	can be included to provide a recommendation of the initial BSS while
+ *	allowing the driver to roam to other BSSes within the ESS and also to
+ *	ignore this recommendation if the indicated BSS is not ideal. Only one
+ *	set of BSSID,frequency parameters is used (i.e., either the enforcing
+ *	%NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
+ *	%NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
  *	Background scan period can optionally be
  *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
  *	if not specified default background scan configuration
@@ -1555,6 +1566,22 @@ enum nl80211_commands {
  *	data is in the format defined for the payload of the QoS Map Set element
  *	in IEEE Std 802.11-2012, 8.4.2.97.
  *
+ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
+ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
+ *
+ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
+ *	associated stations are supported in AP mode (including P2P GO); u32.
+ *	Since drivers may not have a fixed limit on the maximum number (e.g.,
+ *	other concurrent operations may affect this), drivers are allowed to
+ *	advertise values that cannot always be met. In such cases, an attempt
+ *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
+ *
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ *	As specified in the &enum nl80211_tdls_peer_capability.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ *	transmit power to stay within regulatory limits. u32, dBi.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1883,6 +1910,15 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_QOS_MAP,
 
+	NL80211_ATTR_MAC_HINT,
+	NL80211_ATTR_WIPHY_FREQ_HINT,
+
+	NL80211_ATTR_MAX_AP_ASSOC_STA,
+
+	NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
+	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2304,6 +2340,7 @@ enum nl80211_band_attr {
  * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
  *	using this channel as the primary or any of the secondary channels
  *	isn't possible
+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -2322,6 +2359,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
 	NL80211_FREQUENCY_ATTR_NO_80MHZ,
 	NL80211_FREQUENCY_ATTR_NO_160MHZ,
+	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2412,12 +2450,14 @@ enum nl80211_reg_type {
  * 	in KHz. This is not a center a frequency but an actual regulatory
  * 	band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- * 	frequency range, in KHz.
+ *	frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
  * 	for a given frequency range. The value is in mBi (100 * dBi).
  * 	If you don't have one then don't send this.
  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
  * 	a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ *	If not present or 0 default CAC time will be used.
  * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
  *	currently defined
  * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
@@ -2433,6 +2473,8 @@ enum nl80211_reg_rule_attr {
 	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
 	NL80211_ATTR_POWER_RULE_MAX_EIRP,
 
+	NL80211_ATTR_DFS_CAC_TIME,
+
 	/* keep last */
 	__NL80211_REG_RULE_ATTR_AFTER_LAST,
 	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
@@ -2442,9 +2484,15 @@ enum nl80211_reg_rule_attr {
  * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
- * only report BSS with matching SSID.
+ *	only report BSS with matching SSID.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
- *	BSS in scan results. Filtering is turned off if not specified.
+ *	BSS in scan results. Filtering is turned off if not specified. Note that
+ *	if this attribute is in a match set of its own, then it is treated as
+ *	the default value for all matchsets with an SSID, rather than being a
+ *	matchset of its own without an RSSI filter. This is due to problems with
+ *	how this API was implemented in the past. Also, due to the same problem,
+ *	the only way to create a matchset with only an RSSI filter (with this
+ *	attribute) is if there's only a single matchset with the RSSI attribute.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -2477,6 +2525,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
  * 	this includes probe requests or modes of operation that require
  * 	beaconing.
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ *	base on contiguous rules and wider channels will be allowed to cross
+ *	multiple contiguous/overlapping frequency ranges.
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -2488,6 +2539,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_PTMP_ONLY		= 1<<6,
 	NL80211_RRF_NO_IR		= 1<<7,
 	__NL80211_RRF_NO_IBSS		= 1<<8,
+	NL80211_RRF_AUTO_BW		= 1<<11,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -3131,6 +3183,7 @@ enum nl80211_key_attributes {
  *	in an array of MCS numbers.
  * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
  *	see &struct nl80211_txrate_vht
+ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
  * @__NL80211_TXRATE_AFTER_LAST: internal
  * @NL80211_TXRATE_MAX: highest TX rate attribute
  */
@@ -3139,6 +3192,7 @@ enum nl80211_tx_rate_attributes {
 	NL80211_TXRATE_LEGACY,
 	NL80211_TXRATE_HT,
 	NL80211_TXRATE_VHT,
+	NL80211_TXRATE_GI,
 
 	/* keep last */
 	__NL80211_TXRATE_AFTER_LAST,
@@ -3156,6 +3210,12 @@ struct nl80211_txrate_vht {
 	__u16 mcs[NL80211_VHT_NSS_MAX];
 };
 
+enum nl80211_txrate_gi {
+	NL80211_TXRATE_DEFAULT_GI,
+	NL80211_TXRATE_FORCE_SGI,
+	NL80211_TXRATE_FORCE_LGI,
+};
+
 /**
  * enum nl80211_band - Frequency band
  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
@@ -3801,11 +3861,6 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  *	to work properly to suppport receiving regulatory hints from
  *	cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
- *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
- *	in the interface combinations, even when it's only used for scan
- *	and remain-on-channel. This could be due to, for example, the
- *	remain-on-channel implementation requiring a channel context.
  * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
  *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
  *	mode
@@ -3847,7 +3902,7 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_HT_IBSS				= 1 << 1,
 	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
 	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
-	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
+	/* bit 4 is reserved - don't use */
 	NL80211_FEATURE_SAE				= 1 << 5,
 	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
 	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
@@ -4037,4 +4092,20 @@ struct nl80211_vendor_cmd_info {
 	__u32 subcmd;
 };
 
+/**
+ * enum nl80211_tdls_peer_capability - TDLS peer flags.
+ *
+ * Used by tdls_mgmt() to determine which conditional elements need
+ * to be added to TDLS Setup frames.
+ *
+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ */
+enum nl80211_tdls_peer_capability {
+	NL80211_TDLS_PEER_HT = 1<<0,
+	NL80211_TDLS_PEER_VHT = 1<<1,
+	NL80211_TDLS_PEER_WMM = 1<<2,
+};
+
 #endif /* __LINUX_NL80211_H */