mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
a15b4bf6fc
openwrt/target/linux/x86/net5501/target.mk

18 lines
594 B
Makefile
Raw Normal View History

add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 20794
2010-04-11 20:36:55 +08:00
BOARDNAME:=Soekris net5501
net5501: Add features to net5501 and remove HID support (unneeded) Since the net5501 doesn't have a VGA port, it doesn't need HID support either -- all console access will be over a serial port. Also add FEATURES to it as well. Signed-of-by: Philip Prindeville <philip@redfish-solutions.com> SVN-Revision: 23916
2010-11-08 04:37:40 +08:00
FEATURES:=squashfs pci usb gpio
add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 20794
2010-04-11 20:36:55 +08:00
DEFAULT_PACKAGES += kmod-ata-via-sata kmod-crypto-hw-geode \
package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names SVN-Revision: 21137
2010-04-24 22:08:49 +08:00
kmod-gpio-cs5535 kmod-gpio-nsc kmod-gpio-pc8736x \
kmod-wdt-geode kmod-hwmon-core kmod-hwmon-pc87360 \
add kmod-leds-net5501 Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 23729
2010-10-31 06:35:59 +08:00
kmod-via-rhine kmod-leds-net5501 \
add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 20794
2010-04-11 20:36:55 +08:00
kmod-i2c-core kmod-i2c-gpio \
kmod-i2c-algo-bit kmod-i2c-algo-pca kmod-i2c-algo-pcf \
net5501: Add features to net5501 and remove HID support (unneeded) Since the net5501 doesn't have a VGA port, it doesn't need HID support either -- all console access will be over a serial port. Also add FEATURES to it as well. Signed-of-by: Philip Prindeville <philip@redfish-solutions.com> SVN-Revision: 23916
2010-11-08 04:37:40 +08:00
kmod-usb-core kmod-usb2 kmod-usb-uhci
Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms Makes the builds run slightly faster on multicores. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 23495
2010-10-17 20:42:06 +08:00
CFLAGS += -Os -pipe -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps \
add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> SVN-Revision: 20794
2010-04-11 20:36:55 +08:00
-fno-align-labels
define Target/Description
Build firmware images for Soekris net5501 board
endef
Reference in New Issue Copy Permalink