openwrt/target/linux/brcm2708/patches-3.10/0021-sdhci-bcm2708-use-extension-FIFO-to-buffer-DMA-trans.patch

From 3e9891e91d7dda096ab1cc2518830938ad69880d Mon Sep 17 00:00:00 2001
From: popcornmix <popcornmix@gmail.com>
Date: Sun, 12 May 2013 12:25:52 +0100
Subject: [PATCH 021/174] sdhci-bcm2708: use extension FIFO to buffer DMA
 transfers

The additional FIFO might speed up transfers in some cases.
---
 drivers/mmc/host/sdhci-bcm2708.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/mmc/host/sdhci-bcm2708.c
+++ b/drivers/mmc/host/sdhci-bcm2708.c
@@ -74,6 +74,9 @@
 /* Mhz clock that the EMMC core is running at. Should match the platform clockman settings */
 #define BCM2708_EMMC_CLOCK_FREQ 50000000
 
+#define REG_EXRDFIFO_EN     0x80
+#define REG_EXRDFIFO_CFG    0x84
+
 /*****************************************************************************\
  *									     *
  * Debug								     *
@@ -957,10 +960,12 @@ static ssize_t attr_dma_store(struct dev
 		int on = simple_strtol(buf, NULL, 0);
 		if (on) {
 			host->flags |= SDHCI_USE_PLATDMA;
+			sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
 			printk(KERN_INFO "%s: DMA enabled\n",
 			       mmc_hostname(host->mmc));
 		} else {
 			host->flags &= ~(SDHCI_USE_PLATDMA | SDHCI_REQ_USE_DMA);
+			sdhci_bcm2708_writel(host, 0, REG_EXRDFIFO_EN);
 			printk(KERN_INFO "%s: DMA disabled\n",
 			       mmc_hostname(host->mmc));
 		}
@@ -1272,6 +1277,12 @@ static int sdhci_bcm2708_probe(struct pl
 	ret = device_create_file(&pdev->dev, &dev_attr_dma_wait);
 	ret = device_create_file(&pdev->dev, &dev_attr_status);
 
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+	/* enable extension fifo for paced DMA transfers */
+	sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
+	sdhci_bcm2708_writel(host, 4, REG_EXRDFIFO_CFG);
+#endif
+
 	printk(KERN_INFO "%s: BCM2708 SDHC host at 0x%08llx DMA %d IRQ %d\n",
 	       mmc_hostname(host->mmc), (unsigned long long)iomem->start,
 	       host_priv->dma_chan, host_priv->dma_irq);