mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
dc2ba40af3
openwrt/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network

108 lines
1.8 KiB
Plaintext
Raw Normal View History

bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 21:22:14 +08:00
#!/bin/sh
#
# Copyright (C) 2012 OpenWrt.org
#
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
. /lib/functions/uci-defaults.sh
. /lib/brcm63xx.sh
ucidef_set_interface_loopback
case "$board_name" in
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 18:12:40 +08:00
96348W3 |\
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 21:22:14 +08:00
96358-502V |\
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 18:12:40 +08:00
SPW500V)
ucidef_set_interface_lan "eth0"
;;
96338GW |\
96338W |\
96338W2_E7T |\
96348A-122 |\
96348W3 |\
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 21:22:14 +08:00
CPVA642 |\
CT536_CT5621 |\
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 18:12:40 +08:00
CT6373-1 |\
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 21:22:14 +08:00
D-4P-W |\
Add F@ST2604 board support. Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 33886
2012-10-21 22:35:06 +08:00
"F@ST2604" |\
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 18:12:40 +08:00
RTA1320_16M |\
RTA770BW |\
V2110)
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 21:22:14 +08:00
ucidef_set_interface_lan "eth0"
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 18:12:40 +08:00
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
;;
96348GW |\
96348GW-10 |\
96348GW-11 |\
96348GW-A |\
96358VW |\
96358VW2 |\
AGPF-S0 |\
"CPVA502+" |\
DV201AMR |\
DWV-S0 |\
"F@ST2404" |\
HW553 |\
MAGIC |\
RTA1025W_16 |\
V2500V_BB)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "eth1" "1" "1"
ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5"
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 21:22:14 +08:00
;;
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 18:12:40 +08:00
AW4139 |\
HW556*)
bcm63xx: add a default switch configuration for DSL-274XB SVN-Revision: 31874
2012-05-27 21:22:17 +08:00
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t"
;;
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 18:12:40 +08:00
NB4-* |\
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 21:22:14 +08:00
DVG3810BN)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "eth1" "1" "1"
ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5t"
;;
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 18:12:40 +08:00
96328avng |\
96328A-1241N |\
96328A-1441N1 |\
963281TAN |\
963281T_TEF |\
96368MVNgr)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t"
;;
96368MVWG)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "1 2 4 5 8t"
;;
NB6)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
ucidef_add_switch_vlan "switch0" "2" "0 9t"
;;
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 21:22:14 +08:00
*)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
esac
uci commit network
exit 0
Reference in New Issue Copy Permalink