openwrt/target/linux/omap24xx/patches-3.1/300-cbus-platform.patch

Index: linux-3.1/arch/arm/mach-omap2/board-n8x0.c
===================================================================
--- linux-3.1.orig/arch/arm/mach-omap2/board-n8x0.c	2011-10-30 00:48:29.505056863 +0200
+++ linux-3.1/arch/arm/mach-omap2/board-n8x0.c	2011-10-30 00:48:47.357044479 +0200
@@ -15,8 +15,10 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/stddef.h>
+#include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
@@ -33,6 +35,7 @@
 #include <plat/onenand.h>
 #include <plat/mmc.h>
 #include <plat/serial.h>
+#include <plat/cbus.h>
 
 #include "mux.h"
 
@@ -193,6 +196,114 @@ static struct omap_onenand_platform_data
 };
 #endif
 
+#if defined(CONFIG_CBUS) || defined(CONFIG_CBUS_MODULE)
+
+static struct cbus_host_platform_data n8x0_cbus_data = {
+	.clk_gpio	= 66,
+	.dat_gpio	= 65,
+	.sel_gpio	= 64,
+};
+
+static struct platform_device n8x0_cbus_device = {
+	.name		= "cbus",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &n8x0_cbus_data,
+	},
+};
+
+static struct resource retu_resource[] = {
+	{
+		.start	= -EINVAL, /* set later */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct cbus_retu_platform_data n8x0_retu_data = {
+	.irq_base	= CBUS_RETU_IRQ_BASE,
+	.irq_end	= CBUS_RETU_IRQ_END,
+	.devid		= CBUS_RETU_DEVICE_ID,
+};
+
+static struct platform_device retu_device = {
+	.name		= "retu",
+	.id		= -1,
+	.resource	= retu_resource,
+	.num_resources	= ARRAY_SIZE(retu_resource),
+	.dev		= {
+		.platform_data = &n8x0_retu_data,
+	},
+};
+
+static struct resource tahvo_resource[] = {
+	{
+		.start	= -EINVAL, /* set later */
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device tahvo_device = {
+	.name		= "tahvo",
+	.id		= -1,
+	.resource	= tahvo_resource,
+	.num_resources	= ARRAY_SIZE(tahvo_resource),
+};
+
+static struct platform_device tahvo_usb_device = {
+	.name		= "tahvo-usb",
+	.id		= -1,
+};
+
+static void __init n8x0_cbus_init(void)
+{
+	int		ret;
+
+	platform_device_register(&n8x0_cbus_device);
+
+	ret = gpio_request(108, "RETU irq");
+	if (ret < 0) {
+		pr_err("retu: Unable to reserve IRQ GPIO\n");
+		return;
+	}
+
+	ret = gpio_direction_input(108);
+	if (ret < 0) {
+		pr_err("retu: Unable to change gpio direction\n");
+		gpio_free(108);
+		return;
+	}
+
+	irq_set_irq_type(gpio_to_irq(108), IRQ_TYPE_EDGE_RISING);
+	retu_resource[0].start = gpio_to_irq(108);
+	platform_device_register(&retu_device);
+
+	ret = gpio_request(111, "TAHVO irq");
+	if (ret) {
+		pr_err("tahvo: Unable to reserve IRQ GPIO\n");
+		gpio_free(108);
+		return;
+	}
+
+	/* Set the pin as input */
+	ret = gpio_direction_input(111);
+	if (ret) {
+		pr_err("tahvo: Unable to change direction\n");
+		gpio_free(108);
+		gpio_free(111);
+		return;
+	}
+
+	tahvo_resource[0].start = gpio_to_irq(111);
+	platform_device_register(&tahvo_device);
+	platform_device_register(&tahvo_usb_device);
+}
+
+#else
+static inline void __init n8x0_cbus_init(void)
+{
+}
+#endif
+
 #if defined(CONFIG_MENELAUS) &&						\
 	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
 
@@ -679,6 +790,8 @@ static inline void board_serial_init(voi
 static void __init n8x0_init_machine(void)
 {
 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+	n8x0_cbus_init();
+
 	/* FIXME: add n810 spi devices */
 	spi_register_board_info(n800_spi_board_info,
 				ARRAY_SIZE(n800_spi_board_info));
Index: linux-3.1/arch/arm/plat-omap/include/plat/irqs.h
===================================================================
--- linux-3.1.orig/arch/arm/plat-omap/include/plat/irqs.h	2011-10-30 00:48:29.517056855 +0200
+++ linux-3.1/arch/arm/plat-omap/include/plat/irqs.h	2011-10-30 00:48:47.357044479 +0200
@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS	8
 #define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
 
+/* CBUS */
+#define CBUS_RETU_IRQ_BASE	OMAP_GPMC_IRQ_END
+#ifdef CONFIG_CBUS_RETU
+#define CBUS_RETU_NR_IRQS	16
+#else
+#define CBUS_RETU_NR_IRQS	0
+#endif
+#define CBUS_RETU_IRQ_END	(CBUS_RETU_IRQ_BASE + CBUS_RETU_NR_IRQS)
 
-#define NR_IRQS			OMAP_GPMC_IRQ_END
+#define NR_IRQS			CBUS_RETU_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))