mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
f577cb25c0
openwrt/target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch

3345 lines
156 KiB
Diff
Raw Normal View History

lantiq: Add support for linux 4.4 The following patches were dropped because they are already applied upstream: - 0038-MIPS-lantiq-fpi-on-ar9.patch - 0039-MIPS-lantiq-initialize-usb-on-boot.patch - 0042-USB-DWC2-big-endian-support.patch - 0043-gpio-stp-xway-fix-phy-mask.patch All other patches were simply refreshed, except the following: - 0001-MIPS-lantiq-add-pcie-driver.patch Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled some PMU gates for the vrx200 / VR9 SoCs) were removed since the upstream kernel disables unused PMU gates automatically (since 95135bfa7ead1becc2879230f72583dde2b71a0c "MIPS: Lantiq: Deactivate most of the devices by default"). - 0025-NET-MIPS-lantiq-adds-xrx200-net.patch Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers should use of_get_mac_address(). of_get_mac_address_mtd is not available for drivers anymore since it's called automatically within of_get_mac_address(). - 0028-NET-lantiq-various-etop-fixes.patch Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch While refreshing the kernel configuration SPI support had to be moved to config-4.4 because otherwise M25P80 was disabled. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48307
2016-01-18 19:40:19 +08:00
From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 22 Oct 2012 12:22:23 +0200
Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
---
drivers/net/ethernet/Kconfig | 8 +-
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/lantiq_pce.h | 163 +++
drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++
drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++
5 files changed, 3297 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/lantiq_pce.h
create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -103,7 +103,13 @@ config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
---help---
- Support for the MII0 inside the Lantiq SoC
+ Support for the MII0 inside the Lantiq ADSL SoC
+
+config LANTIQ_XRX200
+ tristate "Lantiq SoC XRX200 driver"
+ depends on SOC_TYPE_XWAY
+ ---help---
+ Support for the MII0 inside the Lantiq VDSL SoC
source "drivers/net/ethernet/marvell/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal
obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
--- /dev/null
+++ b/drivers/net/ethernet/lantiq_pce.h
@@ -0,0 +1,163 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *
+ * PCE microcode extracted from UGW5.2 switch api
+ */
+
+/* Switch API Micro Code V0.3 */
+enum {
+ OUT_MAC0 = 0,
+ OUT_MAC1,
+ OUT_MAC2,
+ OUT_MAC3,
+ OUT_MAC4,
+ OUT_MAC5,
+ OUT_ETHTYP,
+ OUT_VTAG0,
+ OUT_VTAG1,
+ OUT_ITAG0,
+ OUT_ITAG1, /*10 */
+ OUT_ITAG2,
+ OUT_ITAG3,
+ OUT_IP0,
+ OUT_IP1,
+ OUT_IP2,
+ OUT_IP3,
+ OUT_SIP0,
+ OUT_SIP1,
+ OUT_SIP2,
+ OUT_SIP3, /*20*/
+ OUT_SIP4,
+ OUT_SIP5,
+ OUT_SIP6,
+ OUT_SIP7,
+ OUT_DIP0,
+ OUT_DIP1,
+ OUT_DIP2,
+ OUT_DIP3,
+ OUT_DIP4,
+ OUT_DIP5, /*30*/
+ OUT_DIP6,
+ OUT_DIP7,
+ OUT_SESID,
+ OUT_PROT,
+ OUT_APP0,
+ OUT_APP1,
+ OUT_IGMP0,
+ OUT_IGMP1,
+ OUT_IPOFF, /*39*/
+ OUT_NONE = 63
+};
+
+/* parser's microcode length type */
+#define INSTR 0
+#define IPV6 1
+#define LENACCU 2
+
+/* parser's microcode flag type */
+enum {
+ FLAG_ITAG = 0,
+ FLAG_VLAN,
+ FLAG_SNAP,
+ FLAG_PPPOE,
+ FLAG_IPV6,
+ FLAG_IPV6FL,
+ FLAG_IPV4,
+ FLAG_IGMP,
+ FLAG_TU,
+ FLAG_HOP,
+ FLAG_NN1, /*10 */
+ FLAG_NN2,
+ FLAG_END,
+ FLAG_NO, /*13*/
+};
+
+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
+struct pce_microcode {
+ unsigned short val[4];
+/* unsigned short val_2;
+ unsigned short val_1;
+ unsigned short val_0;*/
+} pce_microcode[] = {
+ /* value mask ns fields L type flags ipv4_len */
+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+};
--- /dev/null
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -0,0 +1,1801 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Lantiq Deutschland
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/switch.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <asm/delay.h>
+
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/of_gpio.h>
+
+#include <xway_dma.h>
+#include <lantiq_soc.h>
+
+#include "lantiq_pce.h"
+#include "lantiq_xrx200_sw.h"
+
+#define SW_POLLING
+#define SW_ROUTING
+/* #define SW_PORTMAP */
+
+#ifdef SW_ROUTING
+ #ifdef SW_PORTMAP
+#define XRX200_MAX_DEV 2
+ #else
+#define XRX200_MAX_DEV 2
+ #endif
+#else
+#define XRX200_MAX_DEV 1
+#endif
+
+#define XRX200_MAX_VLAN 64
+#define XRX200_PCE_ACTVLAN_IDX 0x01
+#define XRX200_PCE_VLANMAP_IDX 0x02
+
+#define XRX200_MAX_PORT 7
+#define XRX200_MAX_DMA 8
+
+#define XRX200_HEADROOM 4
+
+#define XRX200_TX_TIMEOUT (10 * HZ)
+
+/* port type */
+#define XRX200_PORT_TYPE_PHY 1
+#define XRX200_PORT_TYPE_MAC 2
+
+/* DMA */
+#define XRX200_DMA_DATA_LEN 0x600
+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
+#define XRX200_DMA_RX 0
+#define XRX200_DMA_TX 1
+#define XRX200_DMA_IS_TX(x) (x%2)
+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x))
+
+/* fetch / store dma */
+#define FDMA_PCTRL0 0x2A00
+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
+#define SDMA_PCTRL0 0x2F00
+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
+
+/* buffer management */
+#define BM_PCFG0 0x200
+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
+
+/* MDIO */
+#define MDIO_GLOB 0x0000
+#define MDIO_CTRL 0x0020
+#define MDIO_READ 0x0024
+#define MDIO_WRITE 0x0028
+#define MDIO_PHY0 0x0054
+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
+#define MDIO_CLK_CFG0 0x002C
+#define MDIO_CLK_CFG1 0x0030
+
+#define MDIO_GLOB_ENABLE 0x8000
+#define MDIO_BUSY BIT(12)
+#define MDIO_RD BIT(11)
+#define MDIO_WR BIT(10)
+#define MDIO_MASK 0x1f
+#define MDIO_ADDRSHIFT 5
+#define MDIO1_25MHZ 9
+
+#define MDIO_PHY_LINK_DOWN 0x4000
+#define MDIO_PHY_LINK_UP 0x2000
+
+#define MDIO_PHY_SPEED_M10 0x0000
+#define MDIO_PHY_SPEED_M100 0x0800
+#define MDIO_PHY_SPEED_G1 0x1000
+
+#define MDIO_PHY_FDUP_EN 0x0200
+#define MDIO_PHY_FDUP_DIS 0x0600
+
+#define MDIO_PHY_LINK_MASK 0x6000
+#define MDIO_PHY_SPEED_MASK 0x1800
+#define MDIO_PHY_FDUP_MASK 0x0600
+#define MDIO_PHY_ADDR_MASK 0x001f
+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
+
+/* MII */
+#define MII_CFG(p) (p * 8)
+
+#define MII_CFG_EN BIT(14)
+
+#define MII_CFG_MODE_MIIP 0x0
+#define MII_CFG_MODE_MIIM 0x1
+#define MII_CFG_MODE_RMIIP 0x2
+#define MII_CFG_MODE_RMIIM 0x3
+#define MII_CFG_MODE_RGMII 0x4
+#define MII_CFG_MODE_MASK 0xf
+
+#define MII_CFG_RATE_M2P5 0x00
+#define MII_CFG_RATE_M25 0x10
+#define MII_CFG_RATE_M125 0x20
+#define MII_CFG_RATE_M50 0x30
+#define MII_CFG_RATE_AUTO 0x40
+#define MII_CFG_RATE_MASK 0x70
+
+/* cpu port mac */
+#define PMAC_HD_CTL 0x0000
+#define PMAC_RX_IPG 0x0024
+#define PMAC_EWAN 0x002c
+
+#define PMAC_IPG_MASK 0xf
+#define PMAC_HD_CTL_AS 0x0008
+#define PMAC_HD_CTL_AC 0x0004
+#define PMAC_HD_CTL_RC 0x0010
+#define PMAC_HD_CTL_RXSH 0x0040
+#define PMAC_HD_CTL_AST 0x0080
+#define PMAC_HD_CTL_RST 0x0100
+
+/* PCE */
+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
+#define PCE_TBL_MASK 0x1120
+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
+#define PCE_TBL_ADDR 0x1138
+#define PCE_TBL_CTRL 0x113c
+#define PCE_PMAP1 0x114c
+#define PCE_PMAP2 0x1150
+#define PCE_PMAP3 0x1154
+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
+
+#define PCE_TBL_BUSY BIT(15)
+#define PCE_TBL_CFG_ADDR_MASK 0x1f
+#define PCE_TBL_CFG_ADWR 0x20
+#define PCE_TBL_CFG_ADWR_MASK 0x60
+#define PCE_INGRESS BIT(11)
+
+/* MAC */
+#define MAC_FLEN_REG (0x2314)
+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
+
+/* buffer management */
+#define BM_PCFG(p) (0x200 + (p * 8))
+
+/* special tag in TX path header */
+#define SPID_SHIFT 24
+#define DPID_SHIFT 16
+#define DPID_ENABLE 1
+#define SPID_CPU_PORT 2
+#define PORT_MAP_SEL BIT(15)
+#define PORT_MAP_EN BIT(14)
+#define PORT_MAP_SHIFT 1
+#define PORT_MAP_MASK 0x3f
+
+#define SPPID_MASK 0x7
+#define SPPID_SHIFT 4
+
+/* MII regs not yet in linux */
+#define MDIO_DEVAD_NONE (-1)
+#define ADVERTIZE_MPD (1 << 10)
+
+struct xrx200_port {
+ u8 num;
+ u8 phy_addr;
+ u16 flags;
+ phy_interface_t phy_if;
+
+ int link;
+ int gpio;
+ enum of_gpio_flags gpio_flags;
+
+ struct phy_device *phydev;
+ struct device_node *phy_node;
+};
+
+struct xrx200_chan {
+ int idx;
+ int refcount;
+ int tx_free;
+
+ struct net_device dummy_dev;
+ struct net_device *devs[XRX200_MAX_DEV];
+
+ struct tasklet_struct tasklet;
+ struct napi_struct napi;
+ struct ltq_dma_channel dma;
+ struct sk_buff *skb[LTQ_DESC_NUM];
+};
+
+struct xrx200_hw {
+ struct clk *clk;
+ struct mii_bus *mii_bus;
+
+ struct xrx200_chan chan[XRX200_MAX_DMA];
+
+ struct net_device *devs[XRX200_MAX_DEV];
+ int num_devs;
+
+ int port_map[XRX200_MAX_PORT];
+ unsigned short wan_map;
+
+ spinlock_t lock;
+
+ struct switch_dev swdev;
+};
+
+struct xrx200_priv {
+ struct net_device_stats stats;
+ int id;
+
+ struct xrx200_port port[XRX200_MAX_PORT];
+ int num_port;
+ bool wan;
+ bool sw;
+ unsigned short port_map;
+ unsigned char mac[6];
+
+ struct xrx200_hw *hw;
+};
+
+static __iomem void *xrx200_switch_membase;
+static __iomem void *xrx200_mii_membase;
+static __iomem void *xrx200_mdio_membase;
+static __iomem void *xrx200_pmac_membase;
+
+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
+#define ltq_switch_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
+
+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
+#define ltq_mdio_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
+
+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
+#define ltq_mii_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
+
+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
+#define ltq_pmac_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
+
+#define XRX200_GLOBAL_REGATTR(reg) \
+ .id = reg, \
+ .type = SWITCH_TYPE_INT, \
+ .set = xrx200_set_global_attr, \
+ .get = xrx200_get_global_attr
+
+#define XRX200_PORT_REGATTR(reg) \
+ .id = reg, \
+ .type = SWITCH_TYPE_INT, \
+ .set = xrx200_set_port_attr, \
+ .get = xrx200_get_port_attr
+
+static int xrx200sw_read_x(int reg, int x)
+{
+ int value, mask, addr;
+
+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
+ value = ltq_switch_r32(addr);
+ mask = (1 << xrx200sw_reg[reg].size) - 1;
+ value = (value >> xrx200sw_reg[reg].shift);
+
+ return (value & mask);
+}
+
+static int xrx200sw_read(int reg)
+{
+ return xrx200sw_read_x(reg, 0);
+}
+
+static void xrx200sw_write_x(int value, int reg, int x)
+{
+ int mask, addr;
+
+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
+ mask = (1 << xrx200sw_reg[reg].size) - 1;
+ mask = (mask << xrx200sw_reg[reg].shift);
+ value = (value << xrx200sw_reg[reg].shift) & mask;
+
+ ltq_switch_w32_mask(mask, value, addr);
+}
+
+static void xrx200sw_write(int value, int reg)
+{
+ xrx200sw_write_x(value, reg, 0);
+}
+
+struct xrx200_pce_table_entry {
+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index
+ int table; // PCE_TBL_CTRL.ADDR = pData->table
+ unsigned short key[8];
+ unsigned short val[5];
+ unsigned short mask;
+ unsigned short type;
+ unsigned short valid;
+ unsigned short gmap;
+};
+
+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
+{
+ // wait until hardware is ready
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
+
+ // prepare the table access:
+ // PCE_TBL_ADDR.ADDR = pData->table_index
+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
+ // PCE_TBL_CTRL.ADDR = pData->table
+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
+
+ //(address-based read)
+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
+
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
+
+ // wait until hardware is ready
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
+
+ // read the keys
+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
+
+ // read the values
+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
+
+ // read the mask
+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
+ // read the type
+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
+ // read the valid flag
+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
+ // read the group map
+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
+
+ return 0;
+}
+
+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
+{
+ // wait until hardware is ready
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
+
+ // prepare the table access:
+ // PCE_TBL_ADDR.ADDR = pData->table_index
+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
+ // PCE_TBL_CTRL.ADDR = pData->table
+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
+
+ //(address-based write)
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
+
+ // read the keys
+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
+
+ // read the values
+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
+
+ // read the mask
+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
+ // read the type
+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
+ // read the valid flag
+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
+ // read the group map
+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
+
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
+
+ // wait until hardware is ready
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
+
+ return 0;
+}
+
+static void xrx200sw_fixup_pvids(void)
+{
+ int index, p, portmap, untagged;
+ struct xrx200_pce_table_entry tem;
+ struct xrx200_pce_table_entry tev;
+
+ portmap = 0;
+ for (p = 0; p < XRX200_MAX_PORT; p++)
+ portmap |= BIT(p);
+
+ tem.table = XRX200_PCE_VLANMAP_IDX;
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+
+ for (index = XRX200_MAX_VLAN; index-- > 0;)
+ {
+ tev.index = index;
+ xrx200_pce_table_entry_read(&tev);
+
+ if (tev.valid == 0)
+ continue;
+
+ tem.index = index;
+ xrx200_pce_table_entry_read(&tem);
+
+ if (tem.val[0] == 0)
+ continue;
+
+ untagged = portmap & (tem.val[1] ^ tem.val[2]);
+
+ for (p = 0; p < XRX200_MAX_PORT; p++)
+ if (untagged & BIT(p))
+ {
+ portmap &= ~BIT(p);
+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
+ }
+
+ for (p = 0; p < XRX200_MAX_PORT; p++)
+ if (portmap & BIT(p))
+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
+ }
+}
+
+// swconfig interface
+static void xrx200_hw_init(struct xrx200_hw *hw);
+
+// global
+static int xrx200sw_reset_switch(struct switch_dev *dev)
+{
+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
+
+ xrx200_hw_init(hw);
+
+ return 0;
+}
+
+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ int p;
+
+ if ((attr->max > 0) && (val->value.i > attr->max))
+ return -EINVAL;
+
+ for (p = 0; p < XRX200_MAX_PORT; p++) {
+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
+ }
+
+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
+ return 0;
+}
+
+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ val->value.i = xrx200sw_read(attr->id);
+ return 0;
+}
+
+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ if ((attr->max > 0) && (val->value.i > attr->max))
+ return -EINVAL;
+
+ xrx200sw_write(val->value.i, attr->id);
+ return 0;
+}
+
+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ val->value.i = xrx200sw_read(attr->id);
+ return 0;
+}
+
+// vlan
+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ int i;
+ struct xrx200_pce_table_entry tev;
+ struct xrx200_pce_table_entry tem;
+
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+
+ for (i = 0; i < XRX200_MAX_VLAN; i++)
+ {
+ tev.index = i;
+ xrx200_pce_table_entry_read(&tev);
+ if (tev.key[0] == val->value.i && i != val->port_vlan)
+ return -EINVAL;
+ }
+
+ tev.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tev);
+ tev.key[0] = val->value.i;
+ tev.valid = val->value.i > 0;
+ xrx200_pce_table_entry_write(&tev);
+
+ tem.table = XRX200_PCE_VLANMAP_IDX;
+ tem.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tem);
+ tem.val[0] = val->value.i;
+ xrx200_pce_table_entry_write(&tem);
+
+ xrx200sw_fixup_pvids();
+ return 0;
+}
+
+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct xrx200_pce_table_entry te;
+
+ te.table = XRX200_PCE_ACTVLAN_IDX;
+ te.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&te);
+ val->value.i = te.key[0];
+
+ return 0;
+}
+
+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ int i, portmap, tagmap, untagged;
+ struct xrx200_pce_table_entry tem;
+
+ portmap = 0;
+ tagmap = 0;
+ for (i = 0; i < val->len; i++)
+ {
+ struct switch_port *p = &val->value.ports[i];
+
+ portmap |= (1 << p->id);
+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
+ tagmap |= (1 << p->id);
+ }
+
+ tem.table = XRX200_PCE_VLANMAP_IDX;
+
+ untagged = portmap ^ tagmap;
+ for (i = 0; i < XRX200_MAX_VLAN; i++)
+ {
+ tem.index = i;
+ xrx200_pce_table_entry_read(&tem);
+
+ if (tem.val[0] == 0)
+ continue;
+
+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
+ return -EINVAL;
+ }
+
+ tem.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tem);
+
+ // auto-enable this vlan if not enabled already
+ if (tem.val[0] == 0)
+ {
+ struct switch_val v;
+ v.port_vlan = val->port_vlan;
+ v.value.i = val->port_vlan;
+ if(xrx200sw_set_vlan_vid(dev, NULL, &v))
+ return -EINVAL;
+
+ //read updated tem
+ tem.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tem);
+ }
+
+ tem.val[1] = portmap;
+ tem.val[2] = tagmap;
+ xrx200_pce_table_entry_write(&tem);
+
+ xrx200sw_fixup_pvids();
+
+ return 0;
+}
+
+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ int i;
+ unsigned short ports, tags;
+ struct xrx200_pce_table_entry tem;
+
+ tem.table = XRX200_PCE_VLANMAP_IDX;
+ tem.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tem);
+
+ ports = tem.val[1];
+ tags = tem.val[2];
+
+ for (i = 0; i < XRX200_MAX_PORT; i++) {
+ struct switch_port *p;
+
+ if (!(ports & (1 << i)))
+ continue;
+
+ p = &val->value.ports[val->len++];
+ p->id = i;
+ if (tags & (1 << i))
+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
+ else
+ p->flags = 0;
+ }
+
+ return 0;
+}
+
+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct xrx200_pce_table_entry tev;
+
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+ tev.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tev);
+
+ if (tev.key[0] == 0)
+ return -EINVAL;
+
+ tev.valid = val->value.i;
+ xrx200_pce_table_entry_write(&tev);
+
+ xrx200sw_fixup_pvids();
+ return 0;
+}
+
+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct xrx200_pce_table_entry tev;
+
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+ tev.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tev);
+ val->value.i = tev.valid;
+
+ return 0;
+}
+
+// port
+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
+{
+ struct xrx200_pce_table_entry tev;
+
+ if (port >= XRX200_MAX_PORT)
+ return -EINVAL;
+
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
+ xrx200_pce_table_entry_read(&tev);
+
+ *val = tev.key[0];
+ return 0;
+}
+
+static int xrx200sw_get_port_link(struct switch_dev *dev,
+ int port,
+ struct switch_port_link *link)
+{
+ if (port >= XRX200_MAX_PORT)
+ return -EINVAL;
+
+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
+ if (!link->link)
+ return 0;
+
+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
+
+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
+
+ link->speed = SWITCH_PORT_SPEED_10;
+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
+ link->speed = SWITCH_PORT_SPEED_100;
+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
+ link->speed = SWITCH_PORT_SPEED_1000;
+
+ return 0;
+}
+
+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ if (val->port_vlan >= XRX200_MAX_PORT)
+ return -EINVAL;
+
+ if ((attr->max > 0) && (val->value.i > attr->max))
+ return -EINVAL;
+
+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
+ return 0;
+}
+
+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ if (val->port_vlan >= XRX200_MAX_PORT)
+ return -EINVAL;
+
+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
+ return 0;
+}
+
+// attributes
+static struct switch_attr xrx200sw_globals[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .set = xrx200_set_vlan_mode_enable,
+ .get = xrx200_get_vlan_mode_enable,
+ .name = "enable_vlan",
+ .description = "Enable VLAN mode",
+ .max = 1},
+};
+
+static struct switch_attr xrx200sw_port[] = {
+ {
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
+ .name = "uvr",
+ .description = "Unknown VLAN Rule",
+ .max = 1,
+ },
+ {
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
+ .name = "vsr",
+ .description = "VLAN Security Rule",
+ .max = 1,
+ },
+ {
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
+ .name = "vinr",
+ .description = "VLAN Ingress Tag Rule",
+ .max = 2,
+ },
+ {
+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
+ .name = "tvm",
+ .description = "Transparent VLAN Mode",
+ .max = 1,
+ },
+};
+
+static struct switch_attr xrx200sw_vlan[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "vid",
+ .description = "VLAN ID (0-4094)",
+ .set = xrx200sw_set_vlan_vid,
+ .get = xrx200sw_get_vlan_vid,
+ .max = 4094,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "enable",
+ .description = "Enable VLAN",
+ .set = xrx200sw_set_vlan_enable,
+ .get = xrx200sw_get_vlan_enable,
+ .max = 1,
+ },
+};
+
+static const struct switch_dev_ops xrx200sw_ops = {
+ .attr_global = {
+ .attr = xrx200sw_globals,
+ .n_attr = ARRAY_SIZE(xrx200sw_globals),
+ },
+ .attr_port = {
+ .attr = xrx200sw_port,
+ .n_attr = ARRAY_SIZE(xrx200sw_port),
+ },
+ .attr_vlan = {
+ .attr = xrx200sw_vlan,
+ .n_attr = ARRAY_SIZE(xrx200sw_vlan),
+ },
+ .get_vlan_ports = xrx200sw_get_vlan_ports,
+ .set_vlan_ports = xrx200sw_set_vlan_ports,
+ .get_port_pvid = xrx200sw_get_port_pvid,
+ .reset_switch = xrx200sw_reset_switch,
+ .get_port_link = xrx200sw_get_port_link,
+// .get_port_stats = xrx200sw_get_port_stats, //TODO
+};
+
+static int xrx200sw_init(struct xrx200_hw *hw)
+{
+ int netdev_num;
+
+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
+ {
+ struct switch_dev *swdev;
+ struct net_device *dev = hw->devs[netdev_num];
+ struct xrx200_priv *priv = netdev_priv(dev);
+ if (!priv->sw)
+ continue;
+
+ swdev = &hw->swdev;
+
+ swdev->name = "Lantiq XRX200 Switch";
+ swdev->vlans = XRX200_MAX_VLAN;
+ swdev->ports = XRX200_MAX_PORT;
+ swdev->cpu_port = 6;
+ swdev->ops = &xrx200sw_ops;
+
+ register_switch(swdev, dev);
+ return 0; // enough switches
+ }
+ return 0;
+}
+
+static int xrx200_open(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < XRX200_MAX_DMA; i++) {
+ if (!priv->hw->chan[i].dma.irq)
+ continue;
+ spin_lock_bh(&priv->hw->lock);
+ if (!priv->hw->chan[i].refcount) {
+ if (XRX200_DMA_IS_RX(i))
+ napi_enable(&priv->hw->chan[i].napi);
+ ltq_dma_open(&priv->hw->chan[i].dma);
+ }
+ priv->hw->chan[i].refcount++;
+ spin_unlock_bh(&priv->hw->lock);
+ }
+ for (i = 0; i < priv->num_port; i++)
+ if (priv->port[i].phydev)
+ phy_start(priv->port[i].phydev);
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int xrx200_close(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ int i;
+
+ netif_stop_queue(dev);
+
+ for (i = 0; i < priv->num_port; i++)
+ if (priv->port[i].phydev)
+ phy_stop(priv->port[i].phydev);
+
+ for (i = 0; i < XRX200_MAX_DMA; i++) {
+ if (!priv->hw->chan[i].dma.irq)
+ continue;
+ spin_lock_bh(&priv->hw->lock);
+ priv->hw->chan[i].refcount--;
+ if (!priv->hw->chan[i].refcount) {
+ if (XRX200_DMA_IS_RX(i))
+ napi_disable(&priv->hw->chan[i].napi);
+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
+ }
+ spin_unlock_bh(&priv->hw->lock);
+ }
+
+ return 0;
+}
+
+static int xrx200_alloc_skb(struct xrx200_chan *ch)
+{
+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
+ if (!ch->skb[ch->dma.desc])
+ goto skip;
+
+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
+ DMA_FROM_DEVICE);
+ ch->dma.desc_base[ch->dma.desc].addr =
+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
+
+skip:
+ ch->dma.desc_base[ch->dma.desc].ctl =
+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+ XRX200_DMA_DATA_LEN;
+
+ return 0;
+}
+
+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
+{
+ struct net_device *dev = ch->devs[id];
+ struct xrx200_priv *priv = netdev_priv(dev);
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
+ int ret;
+
+ ret = xrx200_alloc_skb(ch);
+
+ ch->dma.desc++;
+ ch->dma.desc %= LTQ_DESC_NUM;
+
+ if (ret) {
+ netdev_err(dev,
+ "failed to allocate new rx buffer\n");
+ return 0;
+ }
+
+ skb_put(skb, len);
+#ifdef SW_ROUTING
+ skb_pull(skb, 8);
+#endif
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_receive_skb(skb);
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes+=len;
+}
+
+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
+{
+ struct xrx200_chan *ch = container_of(napi,
+ struct xrx200_chan, napi);
+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
+ int rx = 0;
+ int complete = 0;
+
+ while ((rx < budget) && !complete) {
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+#ifdef SW_ROUTING
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
+ u32 *special_tag = (u32*)skb->data;
+ int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK;
+ xrx200_hw_receive(ch, priv->hw->port_map[port]);
+#else
+ xrx200_hw_receive(ch, 0);
+#endif
+ rx++;
+ } else {
+ complete = 1;
+ }
+ }
+
+ if (complete || !rx) {
+ napi_complete(&ch->napi);
+ ltq_dma_enable_irq(&ch->dma);
+ }
+
+ return rx;
+}
+
+static void xrx200_tx_housekeeping(unsigned long ptr)
+{
+ struct xrx200_hw *hw = (struct xrx200_hw *) ptr;
+ struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX];
+ int pkts = 0;
+ int i;
+
+ spin_lock_bh(&hw->lock);
+ ltq_dma_ack_irq(&ch->dma);
+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+ struct sk_buff *skb = ch->skb[ch->tx_free];
+
+ pkts++;
+ ch->skb[ch->tx_free] = NULL;
+ dev_kfree_skb(skb);
+ memset(&ch->dma.desc_base[ch->tx_free], 0,
+ sizeof(struct ltq_dma_desc));
+ ch->tx_free++;
+ ch->tx_free %= LTQ_DESC_NUM;
+ }
+ ltq_dma_enable_irq(&ch->dma);
+ spin_unlock_bh(&hw->lock);
+
+ if (!pkts)
+ return;
+
+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++)
+ netif_wake_queue(ch->devs[i]);
+}
+
+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+
+ return &priv->stats;
+}
+
+static void xrx200_tx_timeout(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+
+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
+
+ priv->stats.tx_errors++;
+ netif_wake_queue(dev);
+}
+
+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX];
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+ u32 byte_offset;
+ int len;
+#ifdef SW_ROUTING
+ #ifdef SW_PORTMAP
+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE;
+ #else
+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
+ #endif
+#endif
+
+ skb->dev = dev;
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+ netdev_err(dev, "tx ring full\n");
+ netif_stop_queue(dev);
+ return NETDEV_TX_BUSY;
+ }
+#ifdef SW_ROUTING
+ #ifdef SW_PORTMAP
+ special_tag |= priv->port_map << PORT_MAP_SHIFT;
+ #else
+ if(priv->id)
+ special_tag |= (1 << DPID_SHIFT);
+ #endif
+ if(skb_headroom(skb) < 4) {
+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
+ dev_kfree_skb_any(skb);
+ skb = tmp;
+ }
+ skb_push(skb, 4);
+ memcpy(skb->data, &special_tag, sizeof(u32));
+ len += 4;
+#endif
+
+ /* dma needs to start on a 16 byte aligned address */
+ byte_offset = CPHYSADDR(skb->data) % 16;
+ ch->skb[ch->dma.desc] = skb;
+
+ dev->trans_start = jiffies;
+
+ spin_lock_bh(&priv->hw->lock);
+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
+ DMA_TO_DEVICE)) - byte_offset;
+ wmb();
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+ ch->dma.desc++;
+ ch->dma.desc %= LTQ_DESC_NUM;
+ if (ch->dma.desc == ch->tx_free)
+ netif_stop_queue(dev);
+
+ spin_unlock_bh(&priv->hw->lock);
+
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes+=len;
+
+ return NETDEV_TX_OK;
+}
+
+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
+{
+ struct xrx200_hw *hw = priv;
+ int chnr = irq - XRX200_DMA_IRQ;
+ struct xrx200_chan *ch = &hw->chan[chnr];
+
+ ltq_dma_disable_irq(&ch->dma);
+ ltq_dma_ack_irq(&ch->dma);
+
+ if (chnr % 2)
+ tasklet_schedule(&ch->tasklet);
+ else
+ napi_schedule(&ch->napi);
+
+ return IRQ_HANDLED;
+}
+
+static int xrx200_dma_init(struct xrx200_hw *hw)
+{
+ int i, err = 0;
+
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+ for (i = 0; i < 8 && !err; i++) {
+ int irq = XRX200_DMA_IRQ + i;
+ struct xrx200_chan *ch = &hw->chan[i];
+
+ ch->idx = ch->dma.nr = i;
+
+ if (i == XRX200_DMA_TX) {
+ ltq_dma_alloc_tx(&ch->dma);
+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
+ } else if (i == XRX200_DMA_RX) {
+ ltq_dma_alloc_rx(&ch->dma);
+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+ ch->dma.desc++)
+ if (xrx200_alloc_skb(ch))
+ err = -ENOMEM;
+ ch->dma.desc = 0;
+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
+ } else
+ continue;
+
+ if (!err)
+ ch->dma.irq = irq;
+ }
+
+ return err;
+}
+
+#ifdef SW_POLLING
+static void xrx200_gmac_update(struct xrx200_port *port)
+{
+ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
+ u16 miirate = 0;
+
+ switch (port->phydev->speed) {
+ case SPEED_1000:
+ phyaddr |= MDIO_PHY_SPEED_G1;
+ miirate = MII_CFG_RATE_M125;
+ break;
+
+ case SPEED_100:
+ phyaddr |= MDIO_PHY_SPEED_M100;
+ switch (miimode) {
+ case MII_CFG_MODE_RMIIM:
+ case MII_CFG_MODE_RMIIP:
+ miirate = MII_CFG_RATE_M50;
+ break;
+ default:
+ miirate = MII_CFG_RATE_M25;
+ break;
+ }
+ break;
+
+ default:
+ phyaddr |= MDIO_PHY_SPEED_M10;
+ miirate = MII_CFG_RATE_M2P5;
+ break;
+ }
+
+ if (port->phydev->link)
+ phyaddr |= MDIO_PHY_LINK_UP;
+ else
+ phyaddr |= MDIO_PHY_LINK_DOWN;
+
+ if (port->phydev->duplex == DUPLEX_FULL)
+ phyaddr |= MDIO_PHY_FDUP_EN;
+ else
+ phyaddr |= MDIO_PHY_FDUP_DIS;
+
+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
+ udelay(1);
+}
+#else
+static void xrx200_gmac_update(struct xrx200_port *port)
+{
+
+}
+#endif
+
+static void xrx200_mdio_link(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < priv->num_port; i++) {
+ if (!priv->port[i].phydev)
+ continue;
+
+ if (priv->port[i].link != priv->port[i].phydev->link) {
+ xrx200_gmac_update(&priv->port[i]);
+ priv->port[i].link = priv->port[i].phydev->link;
+ netdev_info(dev, "port %d %s link\n",
+ priv->port[i].num,
+ (priv->port[i].link)?("got"):("lost"));
+ }
+ }
+}
+
+static inline int xrx200_mdio_poll(struct mii_bus *bus)
+{
+ unsigned cnt = 10000;
+
+ while (likely(cnt--)) {
+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
+ if ((ctrl & MDIO_BUSY) == 0)
+ return 0;
+ }
+
+ return 1;
+}
+
+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+ if (xrx200_mdio_poll(bus))
+ return 1;
+
+ ltq_mdio_w32(val, MDIO_WRITE);
+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
+ (reg & MDIO_MASK),
+ MDIO_CTRL);
+
+ return 0;
+}
+
+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
+{
+ if (xrx200_mdio_poll(bus))
+ return -1;
+
+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
+ (reg & MDIO_MASK),
+ MDIO_CTRL);
+
+ if (xrx200_mdio_poll(bus))
+ return -1;
+
+ return ltq_mdio_r32(MDIO_READ);
+}
+
+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ unsigned val;
+
+ phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found\n");
+ return -ENODEV;
+ }
+
+ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
+ port->phy_if);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "Could not attach to PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full
+ | SUPPORTED_Autoneg
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
+ phydev->advertising = phydev->supported;
+ port->phydev = phydev;
+
+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+ dev->name, phydev->drv->name,
+ dev_name(&phydev->dev), phydev->irq);
+
+#ifdef SW_POLLING
+ phy_read_status(phydev);
+
+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
+ val |= ADVERTIZE_MPD;
+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
+
+ phy_start_aneg(phydev);
+#endif
+ return 0;
+}
+
+static void xrx200_port_config(struct xrx200_priv *priv,
+ const struct xrx200_port *port)
+{
+ u16 miimode = 0;
+
+ switch (port->num) {
+ case 0: /* xMII0 */
+ case 1: /* xMII1 */
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ if (port->flags & XRX200_PORT_TYPE_PHY)
+ /* MII MAC mode, connected to external PHY */
+ miimode = MII_CFG_MODE_MIIM;
+ else
+ /* MII PHY mode, connected to external MAC */
+ miimode = MII_CFG_MODE_MIIP;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ if (port->flags & XRX200_PORT_TYPE_PHY)
+ /* RMII MAC mode, connected to external PHY */
+ miimode = MII_CFG_MODE_RMIIM;
+ else
+ /* RMII PHY mode, connected to external MAC */
+ miimode = MII_CFG_MODE_RMIIP;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* RGMII MAC mode, connected to external PHY */
+ miimode = MII_CFG_MODE_RGMII;
+ break;
+ default:
+ break;
+ }
+ break;
+ case 2: /* internal GPHY0 */
+ case 3: /* internal GPHY0 */
+ case 4: /* internal GPHY1 */
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ /* MII MAC mode, connected to internal GPHY */
+ miimode = MII_CFG_MODE_MIIM;
+ break;
+ default:
+ break;
+ }
+ break;
+ case 5: /* internal GPHY1 or xMII2 */
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ /* MII MAC mode, connected to internal GPHY */
+ miimode = MII_CFG_MODE_MIIM;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* RGMII MAC mode, connected to external PHY */
+ miimode = MII_CFG_MODE_RGMII;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
+ MII_CFG(port->num));
+}
+
+static int xrx200_init(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ struct sockaddr mac;
+ int err, i;
+
+#ifndef SW_POLLING
+ unsigned int reg = 0;
+
+ /* enable auto polling */
+ for (i = 0; i < priv->num_port; i++)
+ reg |= BIT(priv->port[i].num);
+ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
+#endif
+
+ /* setup each port */
+ for (i = 0; i < priv->num_port; i++)
+ xrx200_port_config(priv, &priv->port[i]);
+
+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
+ if (!is_valid_ether_addr(mac.sa_data)) {
+ pr_warn("net-xrx200: invalid MAC, using random\n");
+ eth_random_addr(mac.sa_data);
+ dev->addr_assign_type |= NET_ADDR_RANDOM;
+ }
+
+ err = eth_mac_addr(dev, &mac);
+ if (err)
+ goto err_netdev;
+
+ for (i = 0; i < priv->num_port; i++)
+ if (xrx200_mdio_probe(dev, &priv->port[i]))
+ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
+ priv->port[i].num);
+
+ return 0;
+
+err_netdev:
+ unregister_netdev(dev);
+ free_netdev(dev);
+ return err;
+}
+
+static void xrx200_pci_microcode(void)
+{
+ int i;
+
+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
+ ltq_switch_w32(0, PCE_TBL_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
+ ltq_switch_w32(i, PCE_TBL_ADDR);
+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
+
+ // start the table access:
+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
+ }
+
+ /* tell the switch that the microcode is loaded */
+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
+}
+
+static void xrx200_hw_init(struct xrx200_hw *hw)
+{
+ int i;
+
+ /* enable clock gate */
+ clk_enable(hw->clk);
+
+ ltq_switch_w32(1, 0);
+ mdelay(100);
+ ltq_switch_w32(0, 0);
+ /*
+ * TODO: we should really disbale all phys/miis here and explicitly
+ * enable them in the device secific init function
+ */
+
+ /* disable port fetch/store dma */
+ for (i = 0; i < 7; i++ ) {
+ ltq_switch_w32(0, FDMA_PCTRLx(i));
+ ltq_switch_w32(0, SDMA_PCTRLx(i));
+ }
+
+ /* enable Switch */
+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
+
+ /* load the pce microcode */
+ xrx200_pci_microcode();
+
+ /* Default unknown Broadcat/Multicast/Unicast port maps */
+ ltq_switch_w32(0x7f, PCE_PMAP1);
+ ltq_switch_w32(0x7f, PCE_PMAP2);
+ ltq_switch_w32(0x7f, PCE_PMAP3);
+
+ /* RMON Counter Enable for all physical ports */
+ for (i = 0; i < 7; i++)
+ ltq_switch_w32(0x1, BM_PCFG(i));
+
+ /* disable auto polling */
+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
+
+ /* enable port statistic counters */
+ for (i = 0; i < 7; i++)
+ ltq_switch_w32(0x1, BM_PCFGx(i));
+
+ /* set IPG to 12 */
+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
+
+#ifdef SW_ROUTING
+ /* enable status header, enable CRC */
+ ltq_pmac_w32_mask(0,
+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
+ PMAC_HD_CTL);
+#else
+ /* disable status header, enable CRC */
+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
+ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
+ PMAC_HD_CTL);
+#endif
+
+ /* enable port fetch/store dma & VLAN Modification */
+ for (i = 0; i < 7; i++ ) {
+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
+ }
+
+ /* enable special tag insertion on cpu port */
+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
+}
+
+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
+{
+ int i;
+
+ /* disable the switch */
+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
+
+ /* free the channels and IRQs */
+ for (i = 0; i < 2; i++) {
+ ltq_dma_free(&hw->chan[i].dma);
+ if (hw->chan[i].dma.irq)
+ free_irq(hw->chan[i].dma.irq, hw);
+ }
+
+ /* free the allocated RX ring */
+ for (i = 0; i < LTQ_DESC_NUM; i++)
+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
+
+ /* clear the mdio bus */
+ mdiobus_unregister(hw->mii_bus);
+ mdiobus_free(hw->mii_bus);
+
+ /* release the clock */
+ clk_disable(hw->clk);
+ clk_put(hw->clk);
+}
+
+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
+{
+ hw->mii_bus = mdiobus_alloc();
+ if (!hw->mii_bus)
+ return -ENOMEM;
+
+ hw->mii_bus->read = xrx200_mdio_rd;
+ hw->mii_bus->write = xrx200_mdio_wr;
+ hw->mii_bus->name = "lantiq,xrx200-mdio";
+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+
+ if (of_mdiobus_register(hw->mii_bus, np)) {
+ mdiobus_free(hw->mii_bus);
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
+{
+ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
+ struct xrx200_port *p = &priv->port[priv->num_port];
+
+ if (!id)
+ return;
+
+ memset(p, 0, sizeof(struct xrx200_port));
+ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
+ addr = of_get_property(p->phy_node, "reg", NULL);
+ if (!addr)
+ return;
+
+ p->num = *id;
+ p->phy_addr = *addr;
+ p->phy_if = of_get_phy_mode(port);
+ if (p->phy_addr > 0x10)
+ p->flags = XRX200_PORT_TYPE_MAC;
+ else
+ p->flags = XRX200_PORT_TYPE_PHY;
+ priv->num_port++;
+
+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
+ if (gpio_is_valid(p->gpio))
+ if (!gpio_request(p->gpio, "phy-reset")) {
+ gpio_direction_output(p->gpio,
+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
+ udelay(100);
+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
+ }
+ /* is this port a wan port ? */
+ if (priv->wan)
+ priv->hw->wan_map |= BIT(p->num);
+
+ priv->port_map |= BIT(p->num);
+
+ /* store the port id in the hw struct so we can map ports -> devices */
+ priv->hw->port_map[p->num] = priv->hw->num_devs;
+}
+
+static const struct net_device_ops xrx200_netdev_ops = {
+ .ndo_init = xrx200_init,
+ .ndo_open = xrx200_open,
+ .ndo_stop = xrx200_close,
+ .ndo_start_xmit = xrx200_start_xmit,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_get_stats = xrx200_get_stats,
+ .ndo_tx_timeout = xrx200_tx_timeout,
+};
+
+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
+{
+ struct xrx200_priv *priv;
+ struct device_node *port;
+ const __be32 *wan;
+ const u8 *mac;
+
+ /* alloc the network device */
+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
+ if (!hw->devs[hw->num_devs])
+ return;
+
+ /* setup the network device */
+ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
+
+ /* setup our private data */
+ priv = netdev_priv(hw->devs[hw->num_devs]);
+ priv->hw = hw;
+ priv->id = hw->num_devs;
+
+ mac = of_get_mac_address(iface);
+ if (mac)
+ memcpy(priv->mac, mac, ETH_ALEN);
+
+ /* is this the wan interface ? */
+ wan = of_get_property(iface, "lantiq,wan", NULL);
+ if (wan && (*wan == 1))
+ priv->wan = 1;
+
+ /* should the switch be enabled on this interface ? */
+ if (of_find_property(iface, "lantiq,switch", NULL))
+ priv->sw = 1;
+
+ /* load the ports that are part of the interface */
+ for_each_child_of_node(iface, port)
+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
+ xrx200_of_port(priv, port);
+
+ /* register the actual device */
+ if (!register_netdev(hw->devs[hw->num_devs]))
+ hw->num_devs++;
+}
+
+static struct xrx200_hw xrx200_hw;
+
+static int xrx200_probe(struct platform_device *pdev)
+{
+ struct resource *res[4];
+ struct device_node *mdio_np, *iface_np;
+ int i;
+
+ /* load the memory ranges */
+ for (i = 0; i < 4; i++) {
+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res[i]) {
+ dev_err(&pdev->dev, "failed to get resources\n");
+ return -ENOENT;
+ }
+ }
+ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]);
+ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]);
+ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]);
+ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]);
+ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
+ !xrx200_mii_membase || !xrx200_pmac_membase) {
+ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
+ return -ENOMEM;
+ }
+
+ /* get the clock */
+ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(xrx200_hw.clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ return PTR_ERR(xrx200_hw.clk);
+ }
+
+ /* bring up the dma engine and IP core */
+ spin_lock_init(&xrx200_hw.lock);
+ xrx200_dma_init(&xrx200_hw);
+ xrx200_hw_init(&xrx200_hw);
+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw);
+
+ /* bring up the mdio bus */
+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
+ "lantiq,xrx200-mdio");
+ if (mdio_np)
+ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
+ dev_err(&pdev->dev, "mdio probe failed\n");
+
+ /* load the interfaces */
+ for_each_child_of_node(pdev->dev.of_node, iface_np)
+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
+ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
+ xrx200_of_iface(&xrx200_hw, iface_np);
+ else
+ dev_err(&pdev->dev,
+ "only %d interfaces allowed\n",
+ XRX200_MAX_DEV);
+ }
+
+ if (!xrx200_hw.num_devs) {
+ xrx200_hw_cleanup(&xrx200_hw);
+ dev_err(&pdev->dev, "failed to load interfaces\n");
+ return -ENOENT;
+ }
+
+ xrx200sw_init(&xrx200_hw);
+
+ /* set wan port mask */
+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
+
+ for (i = 0; i < xrx200_hw.num_devs; i++) {
+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
+ }
+
+ /* setup NAPI */
+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
+
+ platform_set_drvdata(pdev, &xrx200_hw);
+
+ return 0;
+}
+
+static int xrx200_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct xrx200_priv *priv;
+
+ if (!dev)
+ return 0;
+
+ priv = netdev_priv(dev);
+
+ /* free stack related instances */
+ netif_stop_queue(dev);
+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
+
+ /* shut down hardware */
+ xrx200_hw_cleanup(&xrx200_hw);
+
+ /* remove the actual device */
+ unregister_netdev(dev);
+ free_netdev(dev);
+
+ return 0;
+}
+
+static const struct of_device_id xrx200_match[] = {
+ { .compatible = "lantiq,xrx200-net" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, xrx200_match);
+
+static struct platform_driver xrx200_driver = {
+ .probe = xrx200_probe,
+ .remove = xrx200_remove,
+ .driver = {
+ .name = "lantiq,xrx200-net",
+ .of_match_table = xrx200_match,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(xrx200_driver);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
@@ -0,0 +1,1328 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
+ *
+ * VR9 switch registers extracted from 310TUJ0 switch api
+ * WARNING mult values of 0x00 may not be correct
+ *
+ */
+
+enum {
+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */
+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */
+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */
+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */
+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */
+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */
+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */
+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */
+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */
+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */
+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */
+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */
+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */
+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */
+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */
+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */
+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */
+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */
+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */
+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */
+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */
+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */
+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */
+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */
+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */
+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */
+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */
+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */
+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */
+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */
+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */
+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */
+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */
+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */
+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */
+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */
+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */
+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */
+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */
+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */
+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */
+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */
+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */
+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */
+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */
+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */
+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */
+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */
+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */
+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */
+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */
+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */
+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */
+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */
+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */
+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */
+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */
+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */
+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */
+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */
+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */
+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */
+// XRX200_ETHSW_IER, /* Interrupt Enable Register */
+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */
+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */
+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */
+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */
+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */
+// XRX200_ETHSW_ISR, /* Interrupt Status Register */
+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */
+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */
+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */
+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */
+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */
+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */
+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */
+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */
+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */
+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */
+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */
+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */
+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */
+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */
+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */
+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */
+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */
+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */
+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */
+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */
+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */
+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */
+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */
+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */
+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */
+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */
+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */
+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */
+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */
+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */
+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */
+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */
+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */
+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */
+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */
+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */
+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */
+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */
+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */
+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */
+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */
+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */
+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */
+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */
+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */
+// XRX200_BM_RAM_ADDR, /* RAM Address Register */
+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */
+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */
+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */
+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */
+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */
+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */
+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */
+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */
+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */
+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */
+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */
+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */
+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */
+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */
+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */
+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */
+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */
+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */
+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */
+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */
+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */
+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */
+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */
+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */
+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */
+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */
+// XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */
+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */
+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */
+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */
+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */
+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */
+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */
+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */
+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */
+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */
+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */
+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */
+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */
+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */
+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */
+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */
+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */
+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */
+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */
+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */
+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */
+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */
+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */
+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */
+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */
+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */
+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */
+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */
+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */
+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */
+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */
+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */
+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */
+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */
+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */
+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */
+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */
+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */
+// XRX200_BM_CISEL_PORT, /* Port Number */
+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */
+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */
+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */
+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */
+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */
+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */
+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */
+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */
+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */
+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */
+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */
+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */
+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */
+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */
+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */
+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */
+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */
+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */
+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */
+// XRX200_RS_CBS_CBS, /* Committed Burst Size */
+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */
+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */
+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */
+// XRX200_RS_CIR_EXP_EXP, /* Exponent */
+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */
+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */
+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */
+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */
+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */
+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */
+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */
+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */
+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */
+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */
+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */
+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */
+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */
+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */
+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */
+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */
+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */
+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */
+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */
+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */
+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */
+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */
+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */
+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */
+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */
+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */
+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */
+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */
+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */
+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */
+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */
+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */
+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */
+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */
+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */
+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */
+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */
+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */
+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */
+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */
+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */
+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */
+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */
+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */
+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */
+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */
+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */
+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */
+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */
+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */
+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */
+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */
+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */
+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */
+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */
+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */
+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */
+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */
+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */
+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */
+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */
+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */
+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */
+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */
+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */
+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */
+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */
+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */
+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */
+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */
+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */
+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */
+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */
+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */
+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */
+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */
+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */
+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */
+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */
+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */
+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */
+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */
+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */
+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */
+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */
+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */
+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */
+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */
+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */
+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */
+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */
+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */
+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */
+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */
+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */
+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */
+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */
+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */
+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */
+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */
+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */
+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */
+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */
+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */
+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */
+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */
+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */
+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */
+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */
+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */
+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */
+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */
+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */
+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */
+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */
+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */
+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */
+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */
+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */
+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */
+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */
+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */
+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */
+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */
+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */
+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */
+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */
+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */
+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */
+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */
+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */
+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */
+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */
+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */
+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */
+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */
+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */
+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */
+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */
+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */
+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */
+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */
+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */
+// XRX200_WOL_CTRL_PORT, /* WoL Enable */
+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */
+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */
+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */
+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */
+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */
+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */
+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */
+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */
+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */
+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */
+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */
+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */
+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */
+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */
+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */
+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */
+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */
+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */
+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */
+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */
+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */
+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */
+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */
+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */
+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */
+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */
+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */
+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */
+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */
+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */
+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */
+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */
+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */
+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */
+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */
+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */
+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */
+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */
+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */
+// XRX200_MAC_TEST, /* MAC Test Register */
+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */
+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */
+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */
+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */
+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */
+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */
+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */
+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */
+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */
+// XRX200_MAC_FLEN, /* MAC Frame Length Register */
+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */
+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */
+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */
+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */
+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */
+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */
+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */
+// XRX200_MAC_PSTAT, /* MAC Port Status Register */
+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */
+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */
+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */
+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */
+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */
+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */
+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */
+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */
+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */
+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */
+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */
+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */
+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */
+// XRX200_MAC_PISR_PACT, /* PHY Active Status */
+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */
+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */
+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */
+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */
+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */
+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */
+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */
+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */
+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */
+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */
+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */
+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */
+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */
+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */
+// XRX200_MAC_PIER_PACT, /* PHY Active Status */
+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */
+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */
+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */
+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */
+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */
+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */
+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */
+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */
+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */
+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */
+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */
+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */
+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */
+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */
+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */
+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */
+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */
+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */
+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */
+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */
+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */
+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */
+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */
+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */
+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */
+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */
+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */
+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */
+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */
+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */
+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */
+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */
+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */
+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */
+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */
+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */
+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */
+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */
+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */
+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */
+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */
+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */
+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */
+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */
+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */
+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */
+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */
+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */
+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */
+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */
+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */
+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */
+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */
+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */
+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */
+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */
+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */
+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */
+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */
+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */
+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */
+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */
+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */
+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */
+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */
+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */
+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */
+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */
+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */
+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */
+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */
+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */
+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */
+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */
+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */
+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */
+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */
+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */
+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */
+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */
+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */
+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */
+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */
+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */
+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */
+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */
+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */
+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */
+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */
+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */
+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */
+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */
+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */
+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */
+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */
+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */
+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */
+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */
+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */
+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */
+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */
+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */
+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */
+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */
+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */
+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */
+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */
+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */
+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */
+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */
+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */
+// XRX200_SDMA_IER_BFULL, /* Buffer Full */
+// XRX200_SDMA_IER_FERR, /* Frame Error */
+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */
+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */
+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */
+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */
+// XRX200_SDMA_ISR_FERR, /* Frame Error */
+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */
+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */
+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */
+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */
+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */
+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */
+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */
+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */
+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */
+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */
+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */
+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */
+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */
+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */
+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */
+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */
+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */
+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */
+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */
+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */
+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */
+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */
+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */
+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
+};
+
+
+struct xrx200sw_reg {
+ int offset;
+ int shift;
+ int size;
+ int mult;
+} xrx200sw_reg[] = {
+// offeset shift size mult
+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */
+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */
+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */
+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */
+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */
+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */
+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */
+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */
+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */
+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */
+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */
+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */
+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */
+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */
+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */
+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */
+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */
+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */
+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */
+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */
+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */
+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */
+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */
+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */
+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */
+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */
+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */
+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */
+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */
+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */
+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */
+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */
+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */
+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */
+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */
+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */
+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */
+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */
+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */
+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */
+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */
+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */
+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */
+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */
+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */
+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */
+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */
+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */
+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */
+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */
+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */
+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */
+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */
+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */
+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */
+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */
+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */
+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */
+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */
+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */
+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */
+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */
+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */
+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */
+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */
+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */
+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */
+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */
+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */
+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */
+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */
+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */
+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */
+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */
+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */
+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */
+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */
+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */
+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */
+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */
+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */
+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */
+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */
+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */
+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */
+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */
+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */
+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */
+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */
+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */
+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */
+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */
+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */
+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */
+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */
+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */
+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */
+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */
+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */
+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */
+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */
+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */
+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */
+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */
+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */
+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */
+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */
+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */
+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */
+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */
+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */
+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */
+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */
+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */
+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */
+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */
+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */
+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */
+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */
+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */
+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */
+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */
+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */
+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */
+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */
+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */
+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */
+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */
+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */
+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */
+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */
+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */
+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */
+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */
+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */
+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */
+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */
+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */
+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */
+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */
+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */
+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */
+// {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */
+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */
+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */
+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */
+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */
+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */
+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */
+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */
+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */
+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */
+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */
+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */
+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */
+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */
+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */
+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */
+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */
+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */
+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */
+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */
+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */
+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */
+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */
+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */
+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */
+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */
+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */
+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */
+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */
+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */
+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */
+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */
+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */
+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */
+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */
+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */
+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */
+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */
+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */
+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */
+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */
+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */
+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */
+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */
+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */
+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */
+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */
+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */
+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */
+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */
+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */
+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */
+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */
+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */
+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */
+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */
+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */
+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */
+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */
+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */
+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */
+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */
+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */
+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */
+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */
+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */
+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */
+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */
+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */
+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */
+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */
+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */
+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */
+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */
+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */
+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */
+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */
+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */
+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */
+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */
+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */
+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */
+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */
+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */
+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */
+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */
+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */
+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */
+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */
+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */
+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */
+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */
+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */
+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */
+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */
+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */
+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */
+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */
+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */
+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */
+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */
+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */
+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */
+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */
+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */
+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */
+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */
+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */
+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */
+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */
+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */
+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */
+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */
+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */
+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */
+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */
+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */
+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */
+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */
+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */
+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */
+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */
+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */
+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */
+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */
+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */
+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */
+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */
+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */
+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */
+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */
+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */
+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */
+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */
+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */
+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */
+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */
+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */
+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */
+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */
+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */
+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */
+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */
+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */
+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */
+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */
+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */
+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */
+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */
+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */
+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */
+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */
+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */
+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */
+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */
+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */
+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */
+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */
+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */
+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */
+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */
+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */
+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */
+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */
+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */
+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */
+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */
+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */
+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */
+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */
+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */
+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */
+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */
+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */
+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */
+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */
+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */
+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */
+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */
+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */
+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */
+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */
+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */
+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */
+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */
+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */
+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */
+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */
+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */
+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */
+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */
+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */
+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */
+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */
+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */
+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */
+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */
+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */
+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */
+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */
+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */
+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */
+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */
+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */
+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */
+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */
+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */
+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */
+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */
+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */
+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */
+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */
+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */
+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */
+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */
+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */
+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */
+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */
+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */
+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */
+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */
+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */
+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */
+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */
+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */
+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */
+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */
+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */
+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */
+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */
+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */
+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */
+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */
+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */
+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */
+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */
+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */
+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */
+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */
+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */
+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */
+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */
+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */
+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */
+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */
+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */
+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */
+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */
+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */
+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */
+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */
+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */
+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */
+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */
+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */
+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */
+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */
+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */
+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */
+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */
+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */
+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */
+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */
+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */
+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */
+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */
+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */
+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */
+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */
+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */
+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */
+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */
+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */
+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */
+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */
+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */
+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */
+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */
+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */
+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */
+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */
+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */
+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */
+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */
+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */
+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */
+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */
+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */
+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */
+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */
+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */
+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */
+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */
+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */
+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */
+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */
+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */
+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */
+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */
+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */
+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */
+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */
+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */
+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */
+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */
+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */
+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */
+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */
+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */
+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */
+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */
+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */
+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */
+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */
+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */
+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */
+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */
+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */
+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */
+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */
+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */
+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */
+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */
+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */
+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */
+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */
+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */
+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */
+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */
+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */
+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */
+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */
+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */
+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */
+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */
+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */
+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */
+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */
+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */
+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */
+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */
+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */
+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */
+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */
+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */
+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */
+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */
+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */
+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */
+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */
+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */
+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */
+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */
+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */
+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */
+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */
+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */
+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */
+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */
+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */
+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */
+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */
+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */
+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */
+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */
+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */
+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */
+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */
+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */
+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */
+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */
+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */
+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */
+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */
+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */
+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */
+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */
+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */
+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */
+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */
+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */
+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */
+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */
+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */
+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */
+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */
+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */
+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */
+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */
+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */
+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */
+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */
+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */
+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */
+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */
+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */
+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */
+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */
+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */
+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */
+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */
+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */
+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */
+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */
+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */
+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */
+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */
+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */
+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */
+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */
+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */
+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */
+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */
+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */
+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */
+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */
+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */
+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */
+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */
+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */
+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */
+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */
+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */
+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */
+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */
+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */
+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */
+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */
+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */
+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */
+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */
+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */
+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */
+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */
+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */
+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */
+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */
+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */
+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */
+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */
+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */
+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */
+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */
+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */
+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */
+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */
+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */
+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */
+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */
+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */
+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */
+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */
+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */
+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */
+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */
+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */
+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */
+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */
+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */
+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */
+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */
+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */
+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */
+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */
+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */
+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */
+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */
+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */
+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */
+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */
+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */
+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */
+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */
+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */
+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */
+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */
+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */
+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */
+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */
+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */
+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */
+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */
+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */
+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */
+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */
+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */
+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */
+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */
+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */
+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */
+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */
+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */
+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */
+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */
+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */
+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */
+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */
+};
+
+
Reference in New Issue Copy Permalink