mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity

ar71xx: add support for Buffalo BHR-4GRV2

Browse Source 
Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
This commit is contained in:
FUKAUMI Naoki 2016-11-08 22:45:00 +09:00 committed by John Crispin
parent 40a16fec6a
commit 0165203304
14 changed files with 442 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -57,6 +57,10 @@ ap147-010)
ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
bhr-4grv2)
ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
;;
bsb)
ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1"
;;

1
target/linux/ar71xx/base-files/etc/board.d/02_network
View File

@ -164,6 +164,7 @@ ar71xx_setup_interfaces()
;;
ap135-020|\
ap136-020|\
bhr-4grv2|\
tew-823dru|\
tl-wr1043nd-v2|\
wzr-450hp2)

9
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -53,6 +53,11 @@ get_status_led() {
aw-nr580)
status_led="$board:green:ready"
;;
bhr-4grv2|\
wzr-hp-ag300h|\
wzr-hp-g300nh2)
status_led="buffalo:red:diag"
;;
bsb)
status_led="$board:red:sys"
;;
@ -393,10 +398,6 @@ get_status_led() {
wlae-ag300n)
status_led="buffalo:green:status"
;;
wzr-hp-ag300h|\
wzr-hp-g300nh2)
status_led="buffalo:red:diag"
;;
r6100|\
wndap360|\
wndr3700|\

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -482,6 +482,9 @@ ar71xx_board_detect() {
*AW-NR580)
name="aw-nr580"
;;
*BHR-4GRV2)
name="bhr-4grv2"
;;
*CAP324)
name="cap324"
;;

1
target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
View File

@ -16,6 +16,7 @@ set_preinit_iface() {
ap83 |\
archer-c5 |\
archer-c7 |\
bhr-4grv2 |\
dir-505-a1 |\
gl-inet |\
jwap003 |\

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -263,6 +263,7 @@ platform_check_image() {
ap152|\
ap96|\
arduino-yun|\
bhr-4grv2|\
bxu2000n-2-a1|\
db120|\
dr344|\

1
target/linux/ar71xx/config-4.4
View File

@ -53,6 +53,7 @@ CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_BHR_4GRV2=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_BSB=y
CONFIG_ATH79_MACH_C55=y

8
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -271,6 +271,14 @@ config ATH79_MACH_SOM9331
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_BHR_4GRV2
bool "Buffalo BHR-4GRV2 board support"
select SOC_QCA955X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
config ATH79_MACH_WHR_HP_G300N
bool "Buffalo WHR-HP-G300N board support"
select SOC_AR724X

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -59,6 +59,7 @@ obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o
obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) += mach-bhu-bxu2000n2-a.o
obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o
obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o

171
target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c Normal file
View File

@ -0,0 +1,171 @@
/*
* Buffalo BHR-4GRV2 board support
*
* Copyright (c) 2012 Qualcomm Atheros
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
*
* Based on mach-ap136.c and mach-wzr-450hp2.c
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/platform_device.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#define BHR_4GRV2_GPIO_LED_VPN_RED 3
#define BHR_4GRV2_GPIO_LED_VPN_GREEN 18
#define BHR_4GRV2_GPIO_LED_POWER_GREEN 19
#define BHR_4GRV2_GPIO_LED_DIAG_RED 20
#define BHR_4GRV2_GPIO_BTN_RESET 17
#define BHR_4GRV2_GPIO_BTN_ECO 21
#define BHR_4GRV2_KEYS_POLL_INTERVAL 20 /* msecs */
#define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL (3 * BHR_4GRV2_KEYS_POLL_INTERVAL)
#define BHR_4GRV2_MAC0_OFFSET 0
#define BHR_4GRV2_MAC1_OFFSET 6
static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = {
{
.name = "buffalo:red:vpn",
.gpio = BHR_4GRV2_GPIO_LED_VPN_RED,
.active_low = 1,
},
{
.name = "buffalo:green:vpn",
.gpio = BHR_4GRV2_GPIO_LED_VPN_GREEN,
.active_low = 1,
},
{
.name = "buffalo:green:power",
.gpio = BHR_4GRV2_GPIO_LED_POWER_GREEN,
.active_low = 1,
},
{
.name = "buffalo:red:diag",
.gpio = BHR_4GRV2_GPIO_LED_DIAG_RED,
.active_low = 1,
}
};
static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
.gpio = BHR_4GRV2_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "ECO button",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
.gpio = BHR_4GRV2_GPIO_BTN_ECO,
.active_low = 1,
},
};
/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_platform_data bhr_4grv2_ar8327_data = {
.pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg,
.pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.port6_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info bhr_4grv2_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &bhr_4grv2_ar8327_data,
},
};
static void __init bhr_4grv2_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio),
bhr_4grv2_leds_gpio);
ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL,
ARRAY_SIZE(bhr_4grv2_gpio_keys),
bhr_4grv2_gpio_keys);
mdiobus_register_board_info(bhr_4grv2_mdio0_info,
ARRAY_SIZE(bhr_4grv2_mdio0_info));
ath79_register_mdio(0, 0x0);
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
/* GMAC0 is connected to the RGMII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x56000000;
ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0);
ath79_register_eth(0);
/* GMAC1 is connected to the SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_pll_data.pll_1000 = 0x03000101;
ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0);
ath79_register_eth(1);
}
MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2",
"Buffalo BHR-4GRV2", bhr_4grv2_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -44,6 +44,7 @@ enum ath79_mach_type {
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARDUINO_YUN, /* Yun */
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */
ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
ATH79_MACH_BSB, /* Smart Electronics Black Swift board */
ATH79_MACH_C55, /* AirTight Networks C-55 */

21
target/linux/ar71xx/image/generic.mk
View File

@ -626,3 +626,24 @@ define Device/dap-2695-a1
endef
TARGET_DEVICES += dap-2695-a1
define Build/mkbuffaloimg
$(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
-R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
-K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
-i $@ -o $@.new
mv $@.new $@
endef
define Device/bhr-4grv2
DEVICE_TITLE := Buffalo BHR-4GRV2
BOARDNAME := BHR-4GRV2
ROOTFS_SIZE := 14528k
KERNEL_SIZE := 1472k
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | mkbuffaloimg
endef
TARGET_DEVICES += bhr-4grv2

1
tools/firmware-utils/Makefile
View File

@ -77,6 +77,7 @@ define Host/Compile
$(call cc,mkmerakifw sha1, -Wall)
$(call cc,mkmerakifw-old, -Wall)
$(call cc,jcgimage, -lz -Wall)
$(call cc,mkbuffaloimg, -Wall)
endef
define Host/Install

223
tools/firmware-utils/src/mkbuffaloimg.c Normal file
View File

@ -0,0 +1,223 @@
/*
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2016 FUKAUMI Naoki <naobsd@gmail.com>
*
* Based on mkdniimg.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h> /* for unlink() */
#include <libgen.h>
#include <getopt.h> /* for getopt() */
#include <stdarg.h>
#include <errno.h>
#include <sys/stat.h>
#define DNI_HDR_LEN 128
/*
* Globals
*/
static char *ifname;
static char *progname;
static char *ofname;
static char *version = "0.00_0.00";
static char *region = "JP";
static char *rootfs_size;
static char *kernel_size;
static char *board_id;
/*
* Message macros
*/
#define ERR(fmt, ...) do { \
fflush(0); \
fprintf(stderr, "[%s] *** error: " fmt "\n", \
progname, ## __VA_ARGS__ ); \
} while (0)
#define ERRS(fmt, ...) do { \
int save = errno; \
fflush(0); \
fprintf(stderr, "[%s] *** error: " fmt ": %s\n", \
progname, ## __VA_ARGS__, strerror(save)); \
} while (0)
void usage(int status)
{
FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout;
fprintf(stream, "Usage: %s [OPTIONS...]\n", progname);
fprintf(stream,
"\n"
"Options:\n"
" -B <board> create image for the board specified with <board>\n"
" -i <file> read input from the file <file>\n"
" -o <file> write output to the file <file>\n"
" -v <version> set image version to <version>\n"
" -r <region> set image region to <region>\n"
" -R <rootfs_size> set RootfsSize to <rootfs_size>\n"
" -K <kernel_size> set KernelSize to <kernel_size>\n"
" -h show this screen\n"
);
exit(status);
}
int main(int argc, char *argv[])
{
int res = EXIT_FAILURE;
int buflen;
int err;
struct stat st;
char *buf;
int i;
uint8_t csum;
FILE *outfile, *infile;
progname = basename(argv[0]);
while ( 1 ) {
int c;
c = getopt(argc, argv, "B:i:o:v:r:R:K:h");
if (c == -1)
break;
switch (c) {
case 'B':
board_id = optarg;
break;
case 'i':
ifname = optarg;
break;
case 'o':
ofname = optarg;
break;
case 'v':
version = optarg;
break;
case 'r':
region = optarg;
break;
case 'R':
rootfs_size = optarg;
break;
case 'K':
kernel_size = optarg;
break;
case 'h':
usage(EXIT_SUCCESS);
break;
default:
usage(EXIT_FAILURE);
break;
}
}
if (board_id == NULL) {
ERR("no board specified");
goto err;
}
if (rootfs_size == NULL) {
ERR("no rootfs_size specified");
goto err;
}
if (kernel_size == NULL) {
ERR("no kernel_size specified");
goto err;
}
if (ifname == NULL) {
ERR("no input file specified");
goto err;
}
if (ofname == NULL) {
ERR("no output file specified");
goto err;
}
err = stat(ifname, &st);
if (err){
ERRS("stat failed on %s", ifname);
goto err;
}
buflen = st.st_size + DNI_HDR_LEN + 1;
buf = malloc(buflen);
if (!buf) {
ERR("no memory for buffer\n");
goto err;
}
memset(buf, 0, DNI_HDR_LEN);
snprintf(buf, DNI_HDR_LEN, "device:%s\nversion:%s\nregion:%s\n"
"RootfsSize:%s\nKernelSize:%s\nInfoHeadSize:128\n",
board_id, version, region, rootfs_size, kernel_size);
buf[DNI_HDR_LEN - 2] = 0x12;
buf[DNI_HDR_LEN - 1] = 0x32;
infile = fopen(ifname, "r");
if (infile == NULL) {
ERRS("could not open \"%s\" for reading", ifname);
goto err_free;
}
errno = 0;
fread(buf + DNI_HDR_LEN, st.st_size, 1, infile);
if (errno != 0) {
ERRS("unable to read from file %s", ifname);
goto err_close_in;
}
csum = 0;
for (i = 0; i < (st.st_size + DNI_HDR_LEN); i++)
csum += buf[i];
csum = 0xff - csum;
buf[st.st_size + DNI_HDR_LEN] = csum;
outfile = fopen(ofname, "w");
if (outfile == NULL) {
ERRS("could not open \"%s\" for writing", ofname);
goto err_close_in;
}
errno = 0;
fwrite(buf, buflen, 1, outfile);
if (errno) {
ERRS("unable to write to file %s", ofname);
goto err_close_out;
}
res = EXIT_SUCCESS;
fflush(outfile);
err_close_out:
fclose(outfile);
if (res != EXIT_SUCCESS) {
unlink(ofname);
}
err_close_in:
fclose(infile);
err_free:
free(buf);
err:
return res;
}