mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity

ar71xx: add support for COMFAST CF-E380AC v1 and v2

Browse Source 
COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE
support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035.

There are two versions of this model, with different RAM
and U-Boot mtd partition sizes:
- v1: 128 MB of RAM, 128 KB U-Boot image size
- v2: 256 MB of RAM, 256 KB U-Boot image size

Version number is available only inside vendor GUI,
hardware and markings are the same.

Short specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 1x 10/100/1000 Mbps Ethernet, with PoE support
- 128 or 256 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm
- 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm
- 6x internal antennas
- 1x RGB LED, 1x button
- UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB
- external watchdog (Pericon Technology PT7A7514)

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz 2016-11-14 17:38:23 +01:00 committed by John Crispin
parent 31952dbd1c
commit 16afa08d19
12 changed files with 211 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -120,6 +120,12 @@ cf-e320n-v2)
ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
cf-e380ac-v1|\
cf-e380ac-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt"
;;
cf-e520n|\
cf-e530n)
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"

2
target/linux/ar71xx/base-files/etc/board.d/02_network
View File

@ -66,6 +66,8 @@ ar71xx_setup_interfaces()
bullet-m|\
c-55|\
cap4200ag|\
cf-e380ac-v1|\
cf-e380ac-v2|\
eap120|\
eap300v2|\
eap7660d|\

4
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -94,6 +94,10 @@ get_status_led() {
cf-e320n-v2)
status_led="$board:blue:wlan"
;;
cf-e380ac-v1|\
cf-e380ac-v2)
status_led="$board:blue:wlan2g"
;;
cpe510)
status_led="tp-link:green:link4"
;;

8
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -47,13 +47,15 @@ board=$(ar71xx_board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
cf-e380ac-v1|\
cf-e380ac-v2|\
dlan-pro-1200-ac)
ath10kcal_extract "art" 20480 2116
;;
dap-2695-a1)
ath10kcal_extract "radiocfg" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
;;
dlan-pro-1200-ac)
ath10kcal_extract "art" 20480 2116
;;
dw33d)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_binary art 18)

6
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -503,6 +503,12 @@ ar71xx_board_detect() {
*"CF-E320N v2")
name="cf-e320n-v2"
;;
*"CF-E380AC v1")
name="cf-e380ac-v1"
;;
*"CF-E380AC v2")
name="cf-e380ac-v2"
;;
*CF-E520N)
name="cf-e520n"
;;

2
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -183,6 +183,8 @@ platform_check_image() {
carambola2|\
cf-e316n-v2|\
cf-e320n-v2|\
cf-e380ac-v1|\
cf-e380ac-v2|\
cf-e520n|\
cf-e530n|\
dgl-5500-a1|\

2
target/linux/ar71xx/config-4.4
View File

@ -63,6 +63,8 @@ CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
CONFIG_ATH79_MACH_CF_E320N_V2=y
CONFIG_ATH79_MACH_CF_E380AC_V1=y
CONFIG_ATH79_MACH_CF_E380AC_V2=y
CONFIG_ATH79_MACH_CF_E520N=y
CONFIG_ATH79_MACH_CF_E530N=y
CONFIG_ATH79_MACH_CPE510=y

22
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -1696,6 +1696,28 @@ config ATH79_MACH_CF_E320N_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E380AC_V1
bool "COMFAST CF-E380AC v1 support"
select SOC_QCA955X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E380AC_V2
bool "COMFAST CF-E380AC v2 support"
select SOC_QCA955X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E520N
bool "COMFAST CF-E520N support"
select SOC_QCA953X

2
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -69,6 +69,8 @@ obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E380AC_V1) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o

145
target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
View File

@ -2,9 +2,11 @@
* Support for COMFAST boards:
* - CF-E316N v2 (AR9341)
* - CF-E320N v2 (QCA9531)
* - CF-E380AC v1/v2 (QCA9558)
* - CF-E520N/CF-E530N (QCA9531)
*
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
* Copyright (C) 2016 Gareth Parker <gareth41@orcon.net.nz>
* Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
@ -13,6 +15,7 @@
*/
#include <linux/gpio.h>
#include <linux/platform_data/phy-at803x.h>
#include <linux/platform_device.h>
#include <linux/timer.h>
@ -20,6 +23,7 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
@ -126,6 +130,70 @@ static struct gpio_keys_button cf_e320n_v2_gpio_keys[] __initdata = {
},
};
/* CF-E380AC v1/v2 */
#define CF_E380AC_V1V2_GPIO_LED_LAN 0
#define CF_E380AC_V1V2_GPIO_LED_WLAN2G 2
#define CF_E380AC_V1V2_GPIO_LED_WLAN5G 3
#define CF_E380AC_V1V2_GPIO_EXT_WDT 17
#define CF_E380AC_V1V2_GPIO_BTN_RESET 19
static struct gpio_led cf_e380ac_v1_leds_gpio[] __initdata = {
{
.name = "cf-e380ac-v1:green:lan",
.gpio = CF_E380AC_V1V2_GPIO_LED_LAN,
.active_low = 0,
}, {
.name = "cf-e380ac-v1:blue:wlan2g",
.gpio = CF_E380AC_V1V2_GPIO_LED_WLAN2G,
.active_low = 0,
}, {
.name = "cf-e380ac-v1:red:wlan5g",
.gpio = CF_E380AC_V1V2_GPIO_LED_WLAN5G,
.active_low = 0,
},
};
static struct gpio_led cf_e380ac_v2_leds_gpio[] __initdata = {
{
.name = "cf-e380ac-v2:green:lan",
.gpio = CF_E380AC_V1V2_GPIO_LED_LAN,
.active_low = 0,
}, {
.name = "cf-e380ac-v2:blue:wlan2g",
.gpio = CF_E380AC_V1V2_GPIO_LED_WLAN2G,
.active_low = 0,
}, {
.name = "cf-e380ac-v2:red:wlan5g",
.gpio = CF_E380AC_V1V2_GPIO_LED_WLAN5G,
.active_low = 0,
},
};
static struct gpio_keys_button cf_e380ac_v1v2_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
.gpio = CF_E380AC_V1V2_GPIO_BTN_RESET,
.active_low = 1,
},
};
static struct at803x_platform_data cf_e380ac_v1v2_at803x_data = {
.disable_smarteee = 1,
};
static struct mdio_board_info cf_e380ac_v1v2_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &cf_e380ac_v1v2_at803x_data,
},
};
/* CF-E520N/CF-E530N */
#define CF_E5X0N_GPIO_LED_WAN 11
#define CF_E5X0N_GPIO_BTN_RESET 17
@ -166,9 +234,9 @@ static void gpio_wdt_toggle(unsigned long gpio)
jiffies + msecs_to_jiffies(CF_EXXXN_EXT_WDT_TIMEOUT_MS));
}
static void __init cf_exxxn_common_setup(int gpio_wdt)
static void __init cf_exxxn_common_setup(unsigned long art_ofs, int gpio_wdt)
{
u8 *art = (u8 *) KSEG1ADDR(0x1f011000);
u8 *art = (u8 *) KSEG1ADDR(0x1f001000 + art_ofs);
if (gpio_wdt > -1) {
gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH,
@ -189,7 +257,7 @@ static void __init cf_e316n_v2_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
cf_exxxn_common_setup(CF_E316N_V2_GPIO_EXT_WDT);
cf_exxxn_common_setup(0x10000, CF_E316N_V2_GPIO_EXT_WDT);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
@ -255,7 +323,7 @@ static void __init cf_exxxn_qca953x_eth_setup(void)
static void __init cf_e320n_v2_setup(void)
{
cf_exxxn_common_setup(CF_E320N_V2_GPIO_EXT_WDT);
cf_exxxn_common_setup(0x10000, CF_E320N_V2_GPIO_EXT_WDT);
cf_exxxn_qca953x_eth_setup();
@ -287,6 +355,71 @@ static void __init cf_e320n_v2_setup(void)
MIPS_MACHINE(ATH79_MACH_CF_E320N_V2, "CF-E320N-V2", "COMFAST CF-E320N v2",
cf_e320n_v2_setup);
static void __init cf_e380ac_v1v2_common_setup(unsigned long art_ofs)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f000000 + art_ofs);
cf_exxxn_common_setup(art_ofs, CF_E380AC_V1V2_GPIO_EXT_WDT);
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
ath79_register_mdio(0, 0x0);
mdiobus_register_board_info(cf_e380ac_v1v2_mdio0_info,
ARRAY_SIZE(cf_e380ac_v1v2_mdio0_info));
/* LAN */
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_pll_data.pll_1000 = 0xbe000000;
ath79_eth0_pll_data.pll_100 = 0xb0000101;
ath79_eth0_pll_data.pll_10 = 0xb0001313;
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
ap91_pci_init(mac + 0x5000, NULL);
/* Disable JTAG (enables GPIO0-3) */
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
ath79_gpio_direction_select(CF_E380AC_V1V2_GPIO_LED_LAN, true);
ath79_gpio_direction_select(CF_E380AC_V1V2_GPIO_LED_WLAN2G, true);
ath79_gpio_direction_select(CF_E380AC_V1V2_GPIO_LED_WLAN5G, true);
ath79_gpio_output_select(CF_E380AC_V1V2_GPIO_LED_LAN, 0);
ath79_gpio_output_select(CF_E380AC_V1V2_GPIO_LED_WLAN2G, 0);
ath79_gpio_output_select(CF_E380AC_V1V2_GPIO_LED_WLAN5G, 0);
/* For J7-4 */
ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e380ac_v1v2_gpio_keys),
cf_e380ac_v1v2_gpio_keys);
}
static void __init cf_e380ac_v1_setup(void)
{
cf_e380ac_v1v2_common_setup(0x20000);
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_v1_leds_gpio),
cf_e380ac_v1_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_CF_E380AC_V1, "CF-E380AC-V1", "COMFAST CF-E380AC v1",
cf_e380ac_v1_setup);
static void __init cf_e380ac_v2_setup(void)
{
cf_e380ac_v1v2_common_setup(0x40000);
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_v2_leds_gpio),
cf_e380ac_v2_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_CF_E380AC_V2, "CF-E380AC-V2", "COMFAST CF-E380AC v2",
cf_e380ac_v2_setup);
static void __init cf_e5x0n_gpio_setup(void)
{
ath79_gpio_direction_select(CF_E5X0N_GPIO_LED_WAN, true);
@ -300,7 +433,7 @@ static void __init cf_e5x0n_gpio_setup(void)
static void __init cf_e520n_setup(void)
{
cf_exxxn_common_setup(-1);
cf_exxxn_common_setup(0x10000, -1);
cf_exxxn_qca953x_eth_setup();
@ -315,7 +448,7 @@ MIPS_MACHINE(ATH79_MACH_CF_E520N, "CF-E520N", "COMFAST CF-E520N",
static void __init cf_e530n_setup(void)
{
cf_exxxn_common_setup(-1);
cf_exxxn_common_setup(0x10000, -1);
cf_exxxn_qca953x_eth_setup();

2
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -54,6 +54,8 @@ enum ath79_mach_type {
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
ATH79_MACH_CF_E380AC_V1, /* COMFAST CF-E380AC v1 */
ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC v2 */
ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
ATH79_MACH_CPE210, /* TP-LINK CPE210 */

19
target/linux/ar71xx/image/generic.mk
View File

@ -35,6 +35,25 @@ define Device/cf-e320n-v2
endef
TARGET_DEVICES += cf-e320n-v2
define Device/cf-e380ac-v1
DEVICE_TITLE := COMFAST CF-E380AC v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
BOARDNAME = CF-E380AC-V1
IMAGE_SIZE = 16128k
CONSOLE = ttyS0,115200
MTDPARTS = spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e380ac-v1
define Device/cf-e380ac-v2
$(Device/cf-e380ac-v1)
DEVICE_TITLE := COMFAST CF-E380AC v2
BOARDNAME = CF-E380AC-V2
IMAGE_SIZE = 16000k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e380ac-v2
define Device/cf-e520n
DEVICE_TITLE := COMFAST CF-E520N
DEVICE_PACKAGES := kmod-usb-core kmod-usb2