ar71xx: add support for TP-LINK WR1043ND v4

Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -629,6 +629,15 @@ tl-wr1043nd-v2)
 	ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
 	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
 	;;
+tl-wr1043nd-v4)
+	ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
+	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+	ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
+	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
+	ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
+	;;
 tl-wr2543n)
 	ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
 	;;

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -299,7 +299,8 @@ ar71xx_setup_interfaces()
 		;;
 	dir-869-a1|\
 	epg5000|\
-	esr1750)
+	esr1750|\
+	tl-wr1043nd-v4)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
 		;;
@@ -459,6 +460,9 @@ ar71xx_setup_macs()
 		lan_mac=$(mtd_get_mac_binary caldata 0)
 		wan_mac=$(mtd_get_mac_binary caldata 6)
 		;;
+	tl-wr1043nd-v4)
+		wan_mac=$(mtd_get_mac_binary config 0x1017c)
+		;;
 	esr900)
 		wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
 		;;

target/linux/ar71xx/base-files/etc/diag.sh

@@ -346,6 +346,7 @@ get_status_led() {
 	tl-wr1041n-v2|\
 	tl-wr1043nd|\
 	tl-wr1043nd-v2|\
+	tl-wr1043nd-v4|\
 	tl-wr741nd|\
 	tl-wr741nd-v4|\
 	tl-wa801nd-v3|\

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -909,6 +909,9 @@ ar71xx_board_detect() {
 	*"TL-WR1043ND v2")
 		name="tl-wr1043nd-v2"
 		;;
+	*"TL-WR1043ND v4")
+		name="tl-wr1043nd-v4"
+		;;
 	*TL-WR2543N*)
 		name="tl-wr2543n"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -378,6 +378,7 @@ platform_check_image() {
 	tl-wpa8630|\
 	tl-wr1041n-v2|\
 	tl-wr1043nd-v2|\
+	tl-wr1043nd-v4|\
 	tl-wr1043nd|\
 	tl-wr2543n|\
 	tl-wr703n|\

target/linux/ar71xx/config-4.4

@@ -175,6 +175,7 @@ CONFIG_ATH79_MACH_TL_WPA8630=y
 CONFIG_ATH79_MACH_TL_WR1041N_V2=y
 CONFIG_ATH79_MACH_TL_WR1043ND=y
 CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND_V4=y
 CONFIG_ATH79_MACH_TL_WR2543N=y
 CONFIG_ATH79_MACH_TL_WR703N=y
 CONFIG_ATH79_MACH_TL_WR720N_V3=y

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -1532,6 +1532,17 @@ config ATH79_MACH_TL_WR1043ND_V2
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_TL_WR1043ND_V4
+	bool "TP-LINK TL-WR1043ND v4 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_TL_WR2543N
 	bool "TP-LINK TL-WR2543N/ND support"
 	select SOC_AR724X
@@ -1814,4 +1825,3 @@ config ATH79_MACH_TL_WPA8630
 	select ATH79_DEV_LEDS_GPIO
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
-

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -179,6 +179,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WPA8630)		+= mach-tl-wpa8630.o
 obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2)		+= mach-tl-wr1041n-v2.o
 obj-$(CONFIG_ATH79_MACH_TL_WR1043ND)		+= mach-tl-wr1043nd.o
 obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2)		+= mach-tl-wr1043nd-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V4)		+= mach-tl-wr1043nd-v4.o
 obj-$(CONFIG_ATH79_MACH_TL_WR2543N)		+= mach-tl-wr2543n.o
 obj-$(CONFIG_ATH79_MACH_TL_WR703N)		+= mach-tl-wr703n.o
 obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3)		+= mach-tl-wr720n-v3.o

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c

@@ -0,0 +1,190 @@
+/*
+ *  TP-LINK WR1043 V4 support
+ *
+ *  Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
+ *  Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net>
+ *  Copyright (C) 2016 Andreas Ziegler <github@andreas-ziegler.de>
+ *  Copyright (C) 2016 Ludwig Thomeczek <ledesrc@wxorx.net>
+ *
+ *  Derived from: mach-dir-869-a1.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include <linux/platform_data/phy-at803x.h>
+#include <linux/ar8216_platform.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define TL_WR1043_V4_GPIO_BTN_RESET		2
+#define TL_WR1043_V4_GPIO_BTN_RFKILL		5
+
+#define TL_WR1043_V4_GPIO_LED_WLAN		19
+#define TL_WR1043_V4_GPIO_LED_USB		7
+#define TL_WR1043_V4_GPIO_LED_WPS		1
+#define TL_WR1043_V4_GPIO_LED_SYSTEM		6
+
+#define TL_WR1043_V4_GPIO_USB_POWER		8
+
+#define TL_WR1043_V4_GPIO_LED_WAN		15
+#define TL_WR1043_V4_GPIO_LED_LAN1		9
+#define TL_WR1043_V4_GPIO_LED_LAN2		14
+#define TL_WR1043_V4_GPIO_LED_LAN3		21
+#define TL_WR1043_V4_GPIO_LED_LAN4		20
+
+#define TL_WR1043_V4_KEYS_POLL_INTERVAL		20 /* msecs */
+#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR1043_V4_KEYS_POLL_INTERVAL)
+
+#define TL_WR1043_V4_MAC_LOCATION		0x1ff80174
+
+#define TL_WR1043_V4_EEPROM_ADDR		0x1fff0000
+#define TL_WR1043_V4_WMAC_CALDATA_OFFSET	0x1000
+
+static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = {
+	{
+		.name		= "tp-link:green:wps",
+		.gpio		= TL_WR1043_V4_GPIO_LED_WPS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:system",
+		.gpio		= TL_WR1043_V4_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:wlan",
+		.gpio		= TL_WR1043_V4_GPIO_LED_WLAN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:usb",
+		.gpio		= TL_WR1043_V4_GPIO_LED_USB,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:wan",
+		.gpio		= TL_WR1043_V4_GPIO_LED_WAN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:lan1",
+		.gpio		= TL_WR1043_V4_GPIO_LED_LAN1,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:lan2",
+		.gpio		= TL_WR1043_V4_GPIO_LED_LAN2,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:lan3",
+		.gpio		= TL_WR1043_V4_GPIO_LED_LAN3,
+		.active_low	= 1,
+	},
+	{
+		.name		= "tp-link:green:lan4",
+		.gpio		= TL_WR1043_V4_GPIO_LED_LAN4,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button tl_wr1043nd_v4_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_WR1043_V4_GPIO_BTN_RESET,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "RFKILL button",
+		.type		= EV_KEY,
+		.code		= KEY_RFKILL,
+		.debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= TL_WR1043_V4_GPIO_BTN_RFKILL,
+		.active_low	= 1,
+	},
+};
+
+static struct ar8327_pad_cfg tl_wr1043nd_v4_ar8327_pad0_cfg = {
+	.mode = AR8327_PAD_MAC_SGMII,
+	.sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data tl_wr1043nd_v4_ar8327_data = {
+	.pad0_cfg = &tl_wr1043nd_v4_ar8327_pad0_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+};
+
+static struct mdio_board_info tl_wr1043nd_v4_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &tl_wr1043nd_v4_ar8327_data,
+	},
+};
+
+static void __init tl_wr1043nd_v4_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V4_MAC_LOCATION);
+	u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_eth0_data.phy_mask = BIT(0);
+
+	mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
+	                            ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info));
+
+	ath79_register_usb();
+	ath79_register_mdio(0, 0);
+	ath79_register_eth(0);
+
+	ath79_register_wmac(eeprom + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_v4_leds_gpio),
+	                         tl_wr1043nd_v4_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL,
+	                                ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys),
+	                                tl_wr1043nd_v4_gpio_keys);
+
+	gpio_request_one(TL_WR1043_V4_GPIO_USB_POWER,
+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4",
+	     "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup);

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -208,6 +208,7 @@ enum ath79_mach_type {
 	ATH79_MACH_TL_WR1041N_V2,		/* TP-LINK TL-WR1041N v2 */
 	ATH79_MACH_TL_WR1043ND,			/* TP-LINK TL-WR1043ND */
 	ATH79_MACH_TL_WR1043ND_V2,		/* TP-LINK TL-WR1043ND v2 */
+	ATH79_MACH_TL_WR1043ND_V4,		/* TP-LINK TL-WR1043ND v4 */
 	ATH79_MACH_TL_WR2543N,			/* TP-LINK TL-WR2543N/ND */
 	ATH79_MACH_TL_WR703N,			/* TP-LINK TL-WR703N */
 	ATH79_MACH_TL_WR710N,			/* TP-LINK TL-WR710N */

target/linux/ar71xx/image/tp-link.mk

@@ -768,7 +768,24 @@ define Device/tl-wr1043nd-v3
     DEVICE_PROFILE := TLWR1043
     TPLINK_HWID := 0x10430003
 endef
-TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3
+
+define Device/tl-wr1043nd-v4
+    $(Device/tplink)
+    DEVICE_TITLE := TP-LINK TL-WR1043N/ND v4
+    DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+    BOARDNAME := TL-WR1043ND-v4
+    DEVICE_PROFILE := TLWR1043
+    TPLINK_HWID :=  0x10430004
+    TPLINK_FLASHLAYOUT := 16Msafeloader
+    MTDPARTS := spi0.0:128k(u-boot)ro,1536k(kernel),14016k(rootfs),128k(product-info)ro,320k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(ART)ro,15552k@0x20000(firmware)
+    IMAGE_SIZE := 15552k
+    TPLINK_BOARD_NAME := TLWR1043NDV4
+    KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-combined -j
+    IMAGES := sysupgrade.bin factory.bin
+    IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+    IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+endef
+TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 tl-wr1043nd-v4
 
 define Device/tl-wr2543-v1
     $(Device/tplink-8mlzma)

target/linux/ar71xx/mikrotik/config-default

@@ -89,6 +89,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
 # CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
 # CONFIG_ATH79_MACH_TL_WR1043ND is not set
 # CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
+# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
 # CONFIG_ATH79_MACH_TL_WR2543N is not set
 # CONFIG_ATH79_MACH_TL_WR703N is not set
 # CONFIG_ATH79_MACH_TL_WR720N_V3 is not set

target/linux/ar71xx/nand/config-default

@@ -50,6 +50,7 @@
 # CONFIG_ATH79_MACH_TL_WDR4300 is not set
 # CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
 # CONFIG_ATH79_MACH_TL_WR1043ND is not set
+# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
 # CONFIG_ATH79_MACH_TL_WR2543N is not set
 # CONFIG_ATH79_MACH_TL_WR703N is not set
 # CONFIG_ATH79_MACH_TL_WR720N_V3 is not set