mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity

ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N

Browse Source 
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.

All 3 devices are based on Qualcomm/Atheros QCA9531 v2.

COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:

- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)

COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:

- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz 2016-10-05 02:24:58 +02:00 committed by John Crispin
parent c380772c19
commit 31952dbd1c
10 changed files with 331 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -115,6 +115,15 @@ cf-e316n-v2)
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
cf-e320n-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
cf-e520n|\
cf-e530n)
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
;;
cpe210|\
cpe510)
ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"

7
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -86,9 +86,14 @@ get_status_led() {
cap4200ag)
status_led="senao:green:pwr"
;;
cf-e316n-v2)
cf-e316n-v2|\
cf-e520n|\
cf-e530n)
status_led="$board:blue:wan"
;;
cf-e320n-v2)
status_led="$board:blue:wlan"
;;
cpe510)
status_led="tp-link:green:link4"
;;

11
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -497,9 +497,18 @@ ar71xx_board_detect() {
*CAP4200AG)
name="cap4200ag"
;;
*"COMFAST CF-E316N v2")
*"CF-E316N v2")
name="cf-e316n-v2"
;;
*"CF-E320N v2")
name="cf-e320n-v2"
;;
*CF-E520N)
name="cf-e520n"
;;
*CF-E530N)
name="cf-e530n"
;;
*"CPE210/220")
name="cpe210"
tplink_pharos_board_detect

3
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -182,6 +182,9 @@ platform_check_image() {
c-55|\
carambola2|\
cf-e316n-v2|\
cf-e320n-v2|\
cf-e520n|\
cf-e530n|\
dgl-5500-a1|\
dhp-1565-a1|\
dir-505-a1|\

3
target/linux/ar71xx/config-4.4
View File

@ -62,6 +62,9 @@ CONFIG_ATH79_MACH_CAP324=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
CONFIG_ATH79_MACH_CF_E320N_V2=y
CONFIG_ATH79_MACH_CF_E520N=y
CONFIG_ATH79_MACH_CF_E530N=y
CONFIG_ATH79_MACH_CPE510=y
CONFIG_ATH79_MACH_CR3000=y
CONFIG_ATH79_MACH_CR5000=y

32
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -1677,7 +1677,7 @@ config ATH79_MACH_CARAMBOLA2
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E316N_V2
bool "COMFAST CF-E316N v2 board"
bool "COMFAST CF-E316N v2 support"
select SOC_AR934X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
@ -1686,6 +1686,36 @@ config ATH79_MACH_CF_E316N_V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E320N_V2
bool "COMFAST CF-E320N v2 support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E520N
bool "COMFAST CF-E520N support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E530N
bool "COMFAST CF-E530N support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_BHU_BXU2000N2_A
bool "BHU BXU2000n-2 rev. A support"
select SOC_AR934X

3
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -68,6 +68,9 @@ obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o

277
target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
View File

@ -1,9 +1,10 @@
/*
* COMFAST CF-E316N v2
* by Shenzhen Four Seas Global Link Network Technology Co., Ltd
*
* aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
* Support for COMFAST boards:
* - CF-E316N v2 (AR9341)
* - CF-E320N v2 (QCA9531)
* - CF-E520N/CF-E530N (QCA9531)
*
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
* Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
@ -27,72 +28,171 @@
#include "dev-usb.h"
#include "machtypes.h"
#define CF_EXXXN_KEYS_POLL_INTERVAL 20
#define CF_EXXXN_KEYS_DEBOUNCE_INTERVAL (3 * CF_EXXXN_KEYS_POLL_INTERVAL)
/* CF-E316N v2 */
#define CF_E316N_V2_GPIO_LED_DIAG_B 0
#define CF_E316N_V2_GPIO_LED_DIAG_R 2
#define CF_E316N_V2_GPIO_LED_DIAG_G 3
#define CF_E316N_V2_GPIO_LED_WLAN 12
#define CF_E316N_V2_GPIO_LED_WAN 17
#define CF_E316N_V2_GPIO_LED_LAN 19
#define CF_E316N_V2_GPIO_EXT_WDT 16
#define CF_E316N_V2_GPIO_EXTERNAL_PA0 13
#define CF_E316N_V2_GPIO_EXTERNAL_PA1 14
#define CF_E316N_V2_GPIO_BTN_RESET 20
static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
{
.name = "cf-e316n-v2:blue:diag",
.gpio = 0,
.gpio = CF_E316N_V2_GPIO_LED_DIAG_B,
.active_low = 0,
}, {
.name = "cf-e316n-v2:red:diag",
.gpio = 2,
.gpio = CF_E316N_V2_GPIO_LED_DIAG_R,
.active_low = 0,
}, {
.name = "cf-e316n-v2:green:diag",
.gpio = 3,
.gpio = CF_E316N_V2_GPIO_LED_DIAG_G,
.active_low = 0,
}, {
.name = "cf-e316n-v2:blue:wlan",
.gpio = 12,
.gpio = CF_E316N_V2_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "cf-e316n-v2:blue:wan",
.gpio = 17,
.gpio = CF_E316N_V2_GPIO_LED_WAN,
.active_low = 1,
}, {
.name = "cf-e316n-v2:blue:lan",
.gpio = 19,
.gpio = CF_E316N_V2_GPIO_LED_LAN,
.active_low = 1,
},
};
static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = 60,
.gpio = 20,
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
.gpio = CF_E316N_V2_GPIO_BTN_RESET,
.active_low = 1,
},
};
/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
#define EXT_WATCHDOG_GPIO 16
/* CF-E320N v2 */
#define CF_E320N_V2_GPIO_LED_WLAN 0
#define CF_E320N_V2_GPIO_LED_WAN 2
#define CF_E320N_V2_GPIO_LED_LAN 3
#define CF_E320N_V2_GPIO_HEADER_J9_1 14
#define CF_E320N_V2_GPIO_HEADER_J9_2 12
#define CF_E320N_V2_GPIO_HEADER_J9_3 11
#define CF_E320N_V2_GPIO_HEADER_J9_4 16
#define CF_E320N_V2_GPIO_EXT_WDT 13
#define CF_E320N_V2_GPIO_BTN_RESET 17
static struct gpio_led cf_e320n_v2_leds_gpio[] __initdata = {
{
.name = "cf-e320n-v2:green:lan",
.gpio = CF_E320N_V2_GPIO_LED_LAN,
.active_low = 0,
}, {
.name = "cf-e320n-v2:red:wan",
.gpio = CF_E320N_V2_GPIO_LED_WAN,
.active_low = 0,
}, {
.name = "cf-e320n-v2:blue:wlan",
.gpio = CF_E320N_V2_GPIO_LED_WLAN,
.active_low = 0,
},
};
static struct gpio_keys_button cf_e320n_v2_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
.gpio = CF_E320N_V2_GPIO_BTN_RESET,
.active_low = 1,
},
};
/* CF-E520N/CF-E530N */
#define CF_E5X0N_GPIO_LED_WAN 11
#define CF_E5X0N_GPIO_BTN_RESET 17
static struct gpio_led cf_e520n_leds_gpio[] __initdata = {
{
.name = "cf-e520n:blue:wan",
.gpio = CF_E5X0N_GPIO_LED_WAN,
.active_low = 1,
}
};
static struct gpio_led cf_e530n_leds_gpio[] __initdata = {
{
.name = "cf-e530n:blue:wan",
.gpio = CF_E5X0N_GPIO_LED_WAN,
.active_low = 1,
}
};
/*
* Some COMFAST devices include external hardware watchdog chip,
* Pericon Technology PT7A7514, connected to a selected GPIO
* and WiSoC RESET_L input. Watchdog time-out is ~1.6 s.
*/
#define CF_EXXXN_EXT_WDT_TIMEOUT_MS 500
static struct timer_list gpio_wdt_timer;
static void gpio_wdt_toggle(unsigned long period)
static void gpio_wdt_toggle(unsigned long gpio)
{
static int state;
state = !state;
gpio_set_value(EXT_WATCHDOG_GPIO, state);
mod_timer(&gpio_wdt_timer, jiffies + period);
gpio_set_value(gpio, state);
mod_timer(&gpio_wdt_timer,
jiffies + msecs_to_jiffies(CF_EXXXN_EXT_WDT_TIMEOUT_MS));
}
static void __init cf_exxxn_common_setup(int gpio_wdt)
{
u8 *art = (u8 *) KSEG1ADDR(0x1f011000);
if (gpio_wdt > -1) {
gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH,
"PT7A7514 watchdog");
setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, gpio_wdt);
gpio_wdt_toggle(gpio_wdt);
}
ath79_register_m25p80(NULL);
ath79_register_wmac(art, NULL);
ath79_register_usb();
}
static void __init cf_e316n_v2_setup(void)
{
u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
u8 tmpmac[ETH_ALEN];
u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
gpio_wdt_toggle(msecs_to_jiffies(1));
ath79_register_m25p80(NULL);
cf_exxxn_common_setup(CF_E316N_V2_GPIO_EXT_WDT);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
ath79_register_mdio(1, 0x0);
/* GMAC0 is connected to the PHY0 of the internal switch */
@ -101,32 +201,129 @@ static void __init cf_e316n_v2_setup(void)
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
ath79_register_eth(1);
/* Enable 2x Skyworks SE2576L WLAN power amplifiers */
gpio_request(13, "RF Amp 1");
gpio_direction_output(13, 1);
gpio_request(14, "RF Amp 2");
gpio_direction_output(14, 1);
ath79_init_mac(tmpmac, macwlan, 0);
ath79_register_wmac(ee, tmpmac);
gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA0, GPIOF_OUT_INIT_HIGH,
"WLAN PA0");
gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA1, GPIOF_OUT_INIT_HIGH,
"WLAN PA1");
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
cf_e316n_v2_leds_gpio);
ath79_register_gpio_keys_polled(1, 20,
ath79_register_gpio_keys_polled(1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e316n_v2_gpio_keys),
cf_e316n_v2_gpio_keys);
/* J1 is a High-Speed USB port, pin 1 is Vcc */
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
cf_e316n_v2_setup);
static void __init cf_exxxn_qca953x_eth_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask |= BIT(4);
/* LAN */
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
ath79_register_eth(1);
/* WAN */
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.phy_mask = BIT(4);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_register_eth(0);
}
static void __init cf_e320n_v2_setup(void)
{
cf_exxxn_common_setup(CF_E320N_V2_GPIO_EXT_WDT);
cf_exxxn_qca953x_eth_setup();
/* Disable JTAG (enables GPIO0-3) */
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_LAN, true);
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WAN, true);
ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WLAN, true);
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_LAN, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WAN, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WLAN, 0);
/* Enable GPIO function for GPIOs in J9 header */
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_1, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_2, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_3, 0);
ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_4, 0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e320n_v2_leds_gpio),
cf_e320n_v2_leds_gpio);
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e320n_v2_gpio_keys),
cf_e320n_v2_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_CF_E320N_V2, "CF-E320N-V2", "COMFAST CF-E320N v2",
cf_e320n_v2_setup);
static void __init cf_e5x0n_gpio_setup(void)
{
ath79_gpio_direction_select(CF_E5X0N_GPIO_LED_WAN, true);
ath79_gpio_output_select(CF_E5X0N_GPIO_LED_WAN, 0);
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e320n_v2_gpio_keys),
cf_e320n_v2_gpio_keys);
}
static void __init cf_e520n_setup(void)
{
cf_exxxn_common_setup(-1);
cf_exxxn_qca953x_eth_setup();
cf_e5x0n_gpio_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e520n_leds_gpio),
cf_e520n_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_CF_E520N, "CF-E520N", "COMFAST CF-E520N",
cf_e520n_setup);
static void __init cf_e530n_setup(void)
{
cf_exxxn_common_setup(-1);
cf_exxxn_qca953x_eth_setup();
cf_e5x0n_gpio_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e530n_leds_gpio),
cf_e530n_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_CF_E530N, "CF-E530N", "COMFAST CF-E530N",
cf_e530n_setup);

3
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -53,6 +53,9 @@ enum ath79_mach_type {
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
ATH79_MACH_CPE210, /* TP-LINK CPE210 */
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_CR3000, /* PowerCloud CR3000 */

27
target/linux/ar71xx/image/generic.mk
View File

@ -23,10 +23,35 @@ define Device/cf-e316n-v2
BOARDNAME = CF-E316N-V2
IMAGE_SIZE = 16192k
CONSOLE = ttyS0,115200
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e316n-v2
define Device/cf-e320n-v2
$(Device/cf-e316n-v2)
DEVICE_TITLE := COMFAST CF-E320N v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME = CF-E320N-V2
endef
TARGET_DEVICES += cf-e320n-v2
define Device/cf-e520n
DEVICE_TITLE := COMFAST CF-E520N
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME = CF-E520N
IMAGE_SIZE = 8000k
CONSOLE = ttyS0,115200
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e520n
define Device/cf-e530n
$(Device/cf-e520n)
DEVICE_TITLE := COMFAST CF-E530N
BOARDNAME = CF-E530N
endef
TARGET_DEVICES += cf-e530n
define Device/domywifi-dw33d
DEVICE_TITLE := DomyWifi DW33D
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-ledtrig-usbdev kmod-ath10k