mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity

ralink: add support for 2 new mt7620 boards made by buffalo

Browse Source 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38550
This commit is contained in:
John Crispin 2013-10-28 06:47:31 +00:00
parent c81c814d6a
commit 43de7c1cfa
8 changed files with 300 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/ramips/base-files/etc/diag.sh
View File

@ -120,6 +120,12 @@ get_status_led() {
whr-g300n)
status_led="whr-g300n:green:router"
;;
whr-300hp2)
status_led="buffalo:green:status"
;;
whr-600d)
status_led="buffalo:green:status"
;;
wli-tx4-ag300n)
status_led="buffalo:blue:power"
;;

1
target/linux/ramips/base-files/etc/hotplug.d/usb/10-motion Normal file
View File

@ -0,0 +1 @@
[ "$ACTION" == "motion" ] && logger webcam motion event

5
target/linux/ramips/base-files/etc/uci-defaults/01_leds
View File

@ -145,6 +145,11 @@ case $board in
ucidef_set_led_netdev "eth" "Network" "asus:white:back" "eth0"
set_wifi_led "asus:blue:wifi"
;;
whr-300hp2 |\
whr-600d)
ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
;;
esac
ucidef_commit_leds

5
target/linux/ramips/base-files/etc/uci-defaults/02_network
View File

@ -146,6 +146,11 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "eth0"
;;
whr-300hp2 |\
whr-600d)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
*)
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
if [ -n "${RT3X5X}" ]; then

6
target/linux/ramips/base-files/lib/ramips.sh
View File

@ -208,6 +208,12 @@ ramips_board_detect() {
*"W502U")
name="w502u"
;;
*"WHR-300HP2")
name="whr-300hp2"
;;
*"WHR-600D")
name="whr-600d"
;;
*"WHR-G300N")
name="whr-g300n"
;;

138
target/linux/ramips/dts/WHR-300HP2.dts Normal file
View File

@ -0,0 +1,138 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Buffalo WHR-300HP2";
palmbus@10000000 {
gpio2: gpio@660 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25q64";
reg = <0 0>;
linux,modalias = "m25p80", "s25fl064k";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x6b0000>;
};
partition@700000 {
label = "usercfg";
reg = <0x700000 0x100000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,function = "gpio";
};
pa {
ralink,group = "pa";
ralink,function = "pa";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
ralink,port-map = "llllw";
};
gsw@10110000 {
ralink,port4 = "ephy";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "buffalo:red:power";
gpios = <&gpio0 7 1>;
};
status {
label = "buffalo:green:status";
gpios = <&gpio0 8 1>;
};
power2 {
label = "buffalo:green:power";
gpios = <&gpio0 9 1>;
};
status2 {
label = "buffalo:orange:status";
gpios = <&gpio0 10 1>;
};
internet {
label = "buffalo:green:internet";
gpios = <&gpio2 17 1>;
};
router {
label = "buffalo:green:router";
gpios = <&gpio2 18 1>;
};
router2 {
label = "buffalo:orange:router";
gpios = <&gpio2 19 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
s1 {
label = "reset";
gpios = <&gpio2 12 1>;
linux,code = <0x100>;
};
s2 {
label = "aoss";
gpios = <&gpio2 13 1>;
linux,code = <0x101>;
};
s3 {
label = "ap";
gpios = <&gpio2 14 1>;
linux,code = <0x102>;
};
s4 {
label = "bridge";
gpios = <&gpio2 15 1>;
linux,code = <0x103>;
};
};
};

134
target/linux/ramips/dts/WHR-600D.dts Normal file
View File

@ -0,0 +1,134 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Buffalo WHR-600D";
palmbus@10000000 {
gpio2: gpio@660 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25q64";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x6b0000>;
};
partition@700000 {
label = "usercfg";
reg = <0x700000 0x100000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
ralink,port-map = "llllw";
};
gsw@10110000 {
ralink,port4 = "ephy";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "buffalo:red:power";
gpios = <&gpio0 7 1>;
};
status {
label = "buffalo:green:status";
gpios = <&gpio0 8 1>;
};
power2 {
label = "buffalo:green:power";
gpios = <&gpio0 9 1>;
};
status2 {
label = "buffalo:orange:status";
gpios = <&gpio0 10 1>;
};
internet {
label = "buffalo:green:internet";
gpios = <&gpio2 17 1>;
};
router {
label = "buffalo:green:router";
gpios = <&gpio2 18 1>;
};
router2 {
label = "buffalo:orange:router";
gpios = <&gpio2 19 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
s1 {
label = "reset";
gpios = <&gpio2 12 1>;
linux,code = <0x100>;
};
s2 {
label = "aoss";
gpios = <&gpio2 13 1>;
linux,code = <0x101>;
};
s3 {
label = "ap";
gpios = <&gpio2 14 1>;
linux,code = <0x102>;
};
s4 {
label = "bridge";
gpios = <&gpio2 15 1>;
linux,code = <0x103>;
};
};
};

5
target/linux/ramips/image/Makefile
View File

@ -614,6 +614,9 @@ Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7
Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
whr_300hp2_mtd_size=7012352
Image/Build/Profile/WHR-300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
Image/Build/Profile/WHR-600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
dlink810l_mtd_size=6881280
Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
@ -624,6 +627,8 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/MT7620a_MT7530,$(1))
$(call Image/Build/Profile/RP-N53,$(1))
$(call Image/Build/Profile/DIR-810L,$(1))
$(call Image/Build/Profile/WHR-300HP2,$(1))
$(call Image/Build/Profile/WHR-600D,$(1))
endef
endif