Fixed support for Iomega
* Added configuration file. * Set blue power led during bootup * enabled pci express Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 23683
This commit is contained in:
Lars-Peter Clausen
parent
41ddcd79ab
commit
5f9f23534b
@ -55,7 +55,7 @@ int board_init(void)
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP12_SD_CLK,
|
||||
MPP12_GPO,
|
||||
MPP13_SD_CMD,
|
||||
MPP14_SD_D0,
|
||||
MPP15_SD_D1,
|
||||
@ -84,14 +84,14 @@ int board_init(void)
|
||||
MPP38_GPIO,
|
||||
MPP39_TDM_SPI_CS0,
|
||||
MPP40_TDM_SPI_SCK,
|
||||
MPP41_TDM_SPI_MISO,
|
||||
MPP42_TDM_SPI_MOSI,
|
||||
MPP43_TDM_CODEC_INTn,
|
||||
MPP41_GPIO,
|
||||
MPP42_GPIO,
|
||||
MPP43_GPIO,
|
||||
MPP44_GPIO,
|
||||
MPP45_TDM_PCLK,
|
||||
MPP46_TDM_FS,
|
||||
MPP47_TDM_DRX,
|
||||
MPP48_TDM_DTX,
|
||||
MPP45_GPIO,
|
||||
MPP46_GPIO,
|
||||
MPP47_GPIO,
|
||||
MPP48_GPIO,
|
||||
MPP49_GPIO,
|
||||
0
|
||||
};
|
||||
|
||||
@ -26,9 +26,9 @@
|
||||
#define __ICONNECT_H
|
||||
|
||||
#define ICONNECT_OE_LOW (~(1 << 7))
|
||||
#define ICONNECT_OE_HIGH (~(1 << 2 | 1 << 12))
|
||||
#define ICONNECT_OE_HIGH (~(1 << 10))
|
||||
#define ICONNECT_OE_VAL_LOW (0)
|
||||
#define ICONNECT_OE_VAL_HIGH (1 << 12)
|
||||
#define ICONNECT_OE_VAL_HIGH (1 << 10)
|
||||
|
||||
/* PHY related */
|
||||
#define MV88E1116_LED_FCTRL_REG 10
|
||||
|
||||
433
package/uboot-kirkwood/files/include/configs/iconnect.h
Normal file
433
package/uboot-kirkwood/files/include/configs/iconnect.h
Normal file
@ -0,0 +1,433 @@
|
||||
/*
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_ICONNECT_H
|
||||
#define _CONFIG_ICONNECT_H
|
||||
|
||||
/*
|
||||
* Version number information
|
||||
*/
|
||||
#define CONFIG_IDENT_STRING "\nIomega iConnect Wireless"
|
||||
|
||||
|
||||
//#define DEBUG
|
||||
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
#define CONFIG_MARVELL 1
|
||||
#define CONFIG_ARM926EJS 1 /* Basic Architecture */
|
||||
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
|
||||
#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
|
||||
#define CONFIG_KW88F6281 1 /* SOC Name */
|
||||
#define CONFIG_MACH_ICONNECT /* Machine type */
|
||||
|
||||
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
|
||||
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
|
||||
#define CONFIG_KIRKWOOD_PCIE_INIT /*enable pci express on iconnect board*/
|
||||
|
||||
/*
|
||||
* CLKs configurations
|
||||
*/
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
|
||||
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
|
||||
|
||||
/*
|
||||
* Serial Port configuration
|
||||
* The following definitions let you select what serial you want to use
|
||||
* for your console driver.
|
||||
*/
|
||||
|
||||
#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
|
||||
115200,230400, 460800, 921600 }
|
||||
/* auto boot */
|
||||
#define CONFIG_BOOTDELAY 3 /* default enable autoboot */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
|
||||
|
||||
#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
|
||||
+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
|
||||
|
||||
/*
|
||||
* Commands configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
|
||||
#include <config_cmd_default.h>
|
||||
#define CONFIG_CMD_AUTOSCRIPT
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_ENV
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
/*
|
||||
* NAND configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_KIRKWOOD
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */
|
||||
#define NAND_ALLOW_ERASE_ALL 1
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment variables configurations
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_ENV_IS_IN_NAND 1
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
|
||||
#else
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
|
||||
#endif
|
||||
/*
|
||||
* max 4k env size is enough, but in case of nand
|
||||
* it has to be rounded to sector size
|
||||
*/
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
|
||||
#define CONFIG_ENV_ADDR 0xc0000 /*it's above original iConnect u-boot envirinment 0xa0000 */
|
||||
#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here */
|
||||
|
||||
/*
|
||||
* Default environment variables
|
||||
*/
|
||||
#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
|
||||
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
|
||||
"${x_bootcmd_usb}; bootm 0x6400000;"
|
||||
|
||||
#define CONFIG_MTDPARTS "orion_nand:1M(u-boot)," \
|
||||
"3M@1M(kernel),32M@4M(rootfs),475M@36M(data)\0"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
|
||||
"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
|
||||
"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
|
||||
"x_bootcmd_usb=usb start\0" \
|
||||
"x_bootargs_root=root=/dev/mtdblock2 rw rootfstype=jffs2\0"
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1 MiB for malloc() */
|
||||
/* size in bytes reserved for initial data */
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
||||
|
||||
/*
|
||||
* Other required minimal configurations
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
|
||||
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
|
||||
#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
|
||||
#define CONFIG_NR_DRAM_BANKS 4
|
||||
#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
|
||||
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
|
||||
/*
|
||||
* Ethernet Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
||||
#define CONFIG_NET_MULTI /* specify more that one ports available */
|
||||
#define CONFIG_MII /* expose smi ove miiphy interface */
|
||||
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
|
||||
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
|
||||
#define CONFIG_MVGBE_PORTS {1,0} /* enable port 0 only */
|
||||
#define CONFIG_PHY_BASE_ADR 11
|
||||
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
|
||||
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
|
||||
#endif /* CONFIG_CMD_NET */
|
||||
|
||||
/*
|
||||
* USB/EHCI
|
||||
*/
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
|
||||
#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
|
||||
#define CONFIG_EHCI_IS_TDI
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_ISO_PARTITION
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
#endif /* CONFIG_CMD_USB */
|
||||
|
||||
/*
|
||||
* File system
|
||||
*/
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_JFFS2
|
||||
#define CONFIG_CMD_UBI
|
||||
#define CONFIG_CMD_UBIFS
|
||||
#define CONFIG_RBTREE
|
||||
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
||||
#define CONFIG_MTD_PARTITIONS
|
||||
#define CONFIG_CMD_MTDPARTS
|
||||
#define CONFIG_LZO
|
||||
|
||||
#endif /* _CONFIG_SHEEVAPLUG_H */
|
||||
/*
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_ICONNECT_H
|
||||
#define _CONFIG_ICONNECT_H
|
||||
|
||||
/*
|
||||
* Version number information
|
||||
*/
|
||||
#define CONFIG_IDENT_STRING "\nIomega iConnect Wireless"
|
||||
|
||||
|
||||
//#define DEBUG
|
||||
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
#define CONFIG_MARVELL 1
|
||||
#define CONFIG_ARM926EJS 1 /* Basic Architecture */
|
||||
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
|
||||
#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
|
||||
#define CONFIG_KW88F6281 1 /* SOC Name */
|
||||
#define CONFIG_MACH_ICONNECT /* Machine type */
|
||||
|
||||
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
|
||||
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
|
||||
|
||||
/*
|
||||
* CLKs configurations
|
||||
*/
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
|
||||
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
|
||||
|
||||
/*
|
||||
* Serial Port configuration
|
||||
* The following definitions let you select what serial you want to use
|
||||
* for your console driver.
|
||||
*/
|
||||
|
||||
#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
|
||||
115200,230400, 460800, 921600 }
|
||||
/* auto boot */
|
||||
#define CONFIG_BOOTDELAY 3 /* default enable autoboot */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
|
||||
|
||||
#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
|
||||
+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
|
||||
|
||||
/*
|
||||
* Commands configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
|
||||
#include <config_cmd_default.h>
|
||||
#define CONFIG_CMD_AUTOSCRIPT
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_ENV
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
/*
|
||||
* NAND configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_KIRKWOOD
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */
|
||||
#define NAND_ALLOW_ERASE_ALL 1
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment variables configurations
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_ENV_IS_IN_NAND 1
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
|
||||
#else
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
|
||||
#endif
|
||||
/*
|
||||
* max 4k env size is enough, but in case of nand
|
||||
* it has to be rounded to sector size
|
||||
*/
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
|
||||
#define CONFIG_ENV_ADDR 0xc0000 /*it's above original iConnect u-boot envirinment 0xa0000 */
|
||||
#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here */
|
||||
|
||||
/*
|
||||
* Default environment variables
|
||||
*/
|
||||
#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
|
||||
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
|
||||
"${x_bootcmd_usb}; bootm 0x6400000;"
|
||||
|
||||
#define CONFIG_MTDPARTS "orion_nand:1M(u-boot)," \
|
||||
"3M@1M(kernel),64M@4M(rootfs),443M@68M(data) rw\0"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
|
||||
"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
|
||||
"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
|
||||
"x_bootcmd_usb=usb start\0" \
|
||||
"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1 MiB for malloc() */
|
||||
/* size in bytes reserved for initial data */
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
||||
|
||||
/*
|
||||
* Other required minimal configurations
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
|
||||
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
|
||||
#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
|
||||
#define CONFIG_NR_DRAM_BANKS 4
|
||||
#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
|
||||
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
|
||||
/*
|
||||
* Ethernet Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
||||
#define CONFIG_NET_MULTI /* specify more that one ports available */
|
||||
#define CONFIG_MII /* expose smi ove miiphy interface */
|
||||
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */
|
||||
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
|
||||
#define CONFIG_MVGBE_PORTS {1,0} /* enable port 0 only */
|
||||
#define CONFIG_PHY_BASE_ADR 11
|
||||
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
|
||||
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
|
||||
#endif /* CONFIG_CMD_NET */
|
||||
|
||||
/*
|
||||
* USB/EHCI
|
||||
*/
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
|
||||
#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
|
||||
#define CONFIG_EHCI_IS_TDI
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_ISO_PARTITION
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
#endif /* CONFIG_CMD_USB */
|
||||
|
||||
/*
|
||||
* File system
|
||||
*/
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_JFFS2
|
||||
#define CONFIG_CMD_UBI
|
||||
#define CONFIG_CMD_UBIFS
|
||||
#define CONFIG_RBTREE
|
||||
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
||||
#define CONFIG_MTD_PARTITIONS
|
||||
#define CONFIG_CMD_MTDPARTS
|
||||
#define CONFIG_LZO
|
||||
|
||||
#endif /* _CONFIG_SHEEVAPLUG_H */
|
||||
Loading…
Reference in New Issue
Block a user