mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity

atheros: v3.18: move PCI enable code to arch

Browse Source 
Move PCI host interface enable code to arch, since it touches generic
SoC registers outside the PCI MMR region.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44718
This commit is contained in:
Felix Fietkau 2015-03-13 03:00:06 +00:00
parent 26136ce9ae
commit 6d7e75fd99
1 changed files with 23 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
target/linux/atheros/patches-3.18/105-ar2315_pci.patch
View File

@ -10,7 +10,7 @@
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
--- /dev/null
+++ b/arch/mips/pci/pci-ar2315.c
@@ -0,0 +1,447 @@
@@ -0,0 +1,428 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
@ -378,7 +378,6 @@
+static int ar2315_pci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ u32 reg;
+ int res;
+
+ /* Remap PCI config space */
@ -389,24 +388,6 @@
+ return -ENOMEM;
+ }
+
+ /* Reset PCI DMA logic */
+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
+ msleep(20);
+ reg &= ~AR2315_RESET_PCIDMA;
+ ar231x_write_reg(AR2315_RESET, reg);
+ msleep(20);
+
+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0,
+ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE);
+
+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
+ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S));
+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK,
+ AR2315_IF_PCI | AR2315_IF_PCI_HOST |
+ AR2315_IF_PCI_INTR | (AR2315_IF_PCI_CLK_OUTPUT_CLK <<
+ AR2315_IF_PCI_CLK_SHIFT));
+
+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE,
+ AR2315_PCIRST_LOW);
@ -484,13 +465,34 @@
else if (pending & CAUSEF_IP2)
do_IRQ(AR2315_IRQ_MISC_INTRS);
else if (pending & CAUSEF_IP7)
@@ -427,4 +431,10 @@ void __init ar2315_arch_init(void)
@@ -427,4 +431,31 @@ void __init ar2315_arch_init(void)
{
ath25_serial_setup(AR2315_UART0, AR2315_MISC_IRQ_UART0,
ar2315_apb_frequency());
+
+#ifdef CONFIG_PCI_AR2315
+ if (ath25_soc == ATH25_SOC_AR2315) {
+ /* Reset PCI DMA logic */
+ ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
+ msleep(20);
+ ar231x_mask_reg(AR2315_RESET, AR2315_RESET_PCIDMA, 0);
+ msleep(20);
+
+ /* Configure endians */
+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0, AR2315_CONFIG_PCIAHB |
+ AR2315_CONFIG_PCIAHB_BRIDGE);
+
+ /* Configure as PCI host with DMA */
+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
+ (AR2315_PCICLK_IN_FREQ_DIV_6 <<
+ AR2315_PCICLK_DIV_S));
+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK |
+ AR2315_IF_MASK, AR2315_IF_PCI |
+ AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
+ (AR2315_IF_PCI_CLK_OUTPUT_CLK <<
+ AR2315_IF_PCI_CLK_SHIFT));
+
+ platform_device_register_simple("ar2315-pci", -1, NULL, 0);
+ }
+#endif