add support for 2.6.36 kernel
SVN-Revision: 23760
This commit is contained in:
Florian Fainelli
parent
cbf63d4c93
commit
90165562aa
215
target/linux/ep93xx/config-2.6.36
Normal file
215
target/linux/ep93xx/config-2.6.36
Normal file
@ -0,0 +1,215 @@
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
# CONFIG_ARCH_CNS3XXX is not set
|
||||
CONFIG_ARCH_EP93XX=y
|
||||
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
|
||||
# CONFIG_ARCH_LPC32XX is not set
|
||||
# CONFIG_ARCH_NUC93X is not set
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_S5P6440 is not set
|
||||
# CONFIG_ARCH_S5P6442 is not set
|
||||
# CONFIG_ARCH_S5PC100 is not set
|
||||
# CONFIG_ARCH_S5PV210 is not set
|
||||
# CONFIG_ARCH_S5PV310 is not set
|
||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||
# CONFIG_ARCH_SHMOBILE is not set
|
||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_ARCH_TEGRA is not set
|
||||
CONFIG_ARCH_USES_GETTIMEOFFSET=y
|
||||
# CONFIG_ARCH_VEXPRESS is not set
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=5
|
||||
# CONFIG_ARM_SP805_WATCHDOG is not set
|
||||
CONFIG_ARM_THUMB=y
|
||||
CONFIG_ARM_VIC=y
|
||||
CONFIG_ARM_VIC_NR=2
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_AUTO_ZRELADDR is not set
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
# CONFIG_CC_STACKPROTECTOR is not set
|
||||
CONFIG_CMDLINE="console=ttyAM0,57600 init=/etc/preinit"
|
||||
CONFIG_COMMON_CLKDEV=y
|
||||
CONFIG_CONSOLE_TRANSLATIONS=y
|
||||
CONFIG_CPU_32v4T=y
|
||||
CONFIG_CPU_ABRT_EV4T=y
|
||||
CONFIG_CPU_ARM920T=y
|
||||
CONFIG_CPU_CACHE_V4WT=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_V4WB=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_PABRT_LEGACY=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
CONFIG_CRC7=y
|
||||
CONFIG_CRC_ITU_T=y
|
||||
CONFIG_CRUNCH=y
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
CONFIG_CRYPTO_AES=y
|
||||
CONFIG_CRYPTO_ARC4=y
|
||||
CONFIG_CRYPTO_BLKCIPHER=y
|
||||
CONFIG_CRYPTO_BLKCIPHER2=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
CONFIG_CRYPTO_ECB=m
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_MANAGER=y
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_MICHAEL_MIC=y
|
||||
CONFIG_CRYPTO_PCBC=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_ELF_CORE=y
|
||||
# CONFIG_ENABLE_WARN_DEPRECATED is not set
|
||||
CONFIG_EP93XX_EARLY_UART1=y
|
||||
# CONFIG_EP93XX_EARLY_UART2 is not set
|
||||
# CONFIG_EP93XX_EARLY_UART3 is not set
|
||||
CONFIG_EP93XX_ETH=y
|
||||
CONFIG_EP93XX_SDCE0_PHYS_OFFSET=y
|
||||
# CONFIG_EP93XX_SDCE1_PHYS_OFFSET is not set
|
||||
# CONFIG_EP93XX_SDCE2_PHYS_OFFSET is not set
|
||||
# CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET is not set
|
||||
# CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET is not set
|
||||
CONFIG_EP93XX_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
# CONFIG_FB_ARMCLCD is not set
|
||||
CONFIG_FB_CFB_COPYAREA=y
|
||||
CONFIG_FB_CFB_FILLRECT=y
|
||||
CONFIG_FB_CFB_IMAGEBLIT=y
|
||||
CONFIG_FB_EP93XX=y
|
||||
# CONFIG_FB_SM7XX is not set
|
||||
# CONFIG_FIRMWARE_EDID is not set
|
||||
CONFIG_FONTS=y
|
||||
# CONFIG_FONT_10x18 is not set
|
||||
# CONFIG_FONT_6x11 is not set
|
||||
# CONFIG_FONT_7x14 is not set
|
||||
CONFIG_FONT_8x16=y
|
||||
CONFIG_FONT_8x8=y
|
||||
# CONFIG_FONT_ACORN_8x8 is not set
|
||||
# CONFIG_FONT_MINI_4x6 is not set
|
||||
# CONFIG_FONT_PEARL_8x8 is not set
|
||||
# CONFIG_FONT_SUN12x22 is not set
|
||||
# CONFIG_FONT_SUN8x16 is not set
|
||||
CONFIG_FORCE_MAX_ZONEORDER=11
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_FPE_NWFPE_XP=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
CONFIG_GPIOLIB=y
|
||||
# CONFIG_GPIO_PL061 is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_AOUT=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_KERNEL_GZIP=y
|
||||
CONFIG_HAVE_KERNEL_LZMA=y
|
||||
CONFIG_HAVE_KERNEL_LZO=y
|
||||
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PROC_CPU=y
|
||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_ALGOBIT=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_LOGO_LINUX_CLUT224=y
|
||||
CONFIG_LOGO_LINUX_MONO=y
|
||||
CONFIG_LOGO_LINUX_VGA16=y
|
||||
CONFIG_LOG_BUF_SHIFT=16
|
||||
# CONFIG_MACH_EDB9302A is not set
|
||||
# CONFIG_MACH_EDB9307A is not set
|
||||
# CONFIG_MACH_EDB9315A is not set
|
||||
CONFIG_MACH_SIM_ONE=y
|
||||
# CONFIG_MACH_SNAPPER_CL15 is not set
|
||||
# CONFIG_MFD_T7L66XB is not set
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_SPI=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
# CONFIG_MTD_CFI_GEOMETRY is not set
|
||||
CONFIG_MTD_CFI_STAA=y
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_RAM=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_OABI_COMPAT=y
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
# CONFIG_PCI_SYSCALL is not set
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
# CONFIG_PLAT_SPEAR is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SDIO_UART is not set
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_AMBA_PL010=y
|
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||
# CONFIG_SPARSE_IRQ is not set
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_SPI_EP93XX=y
|
||||
# CONFIG_SPI_GPIO is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
# CONFIG_SPI_PL022 is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=999999
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_CUBIC=y
|
||||
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
|
||||
CONFIG_TOUCHSCREEN_EP93XX=y
|
||||
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
|
||||
CONFIG_UID16=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
CONFIG_VIDEO_OUTPUT_CONTROL=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
59
target/linux/ep93xx/patches-2.6.36/001-ep93xx_cpuinfo.patch
Normal file
59
target/linux/ep93xx/patches-2.6.36/001-ep93xx_cpuinfo.patch
Normal file
@ -0,0 +1,59 @@
|
||||
This patch puts the EP93xx chip revision and unique ID into /proc/cpuinfo.
|
||||
This is necessary to be able to set a unique MAC address for DHCP purposes
|
||||
by adding a line to /etc/network/interfaces:
|
||||
|
||||
# Generate a unique locally-assigned MAC address from the CPU serial number
|
||||
pre-up ifconfig eth0 hw ether `sed -n 's/^Serial.* 000000/02/p' /proc/cpuinfo`
|
||||
|
||||
It uses the chip revision reading code in the ep93xx-chip-revision patch.
|
||||
|
||||
Really, this is wrong, since /proc/cpuinfo should report the revision and
|
||||
serial number of the ARM920T processor, while these are the rev and serial
|
||||
of the EP93xx SoC. In a future kernel (>2.6.34) there may be a new file
|
||||
/proc/socinfo for this information.
|
||||
|
||||
-martinwguy 14 May 2010
|
||||
|
||||
--- a/arch/arm/kernel/setup.c
|
||||
+++ b/arch/arm/kernel/setup.c
|
||||
@@ -47,6 +47,12 @@
|
||||
#include <asm/traps.h>
|
||||
#include <asm/unwind.h>
|
||||
|
||||
+#if defined(CONFIG_ARCH_EP93XX)
|
||||
+#include <mach/io.h>
|
||||
+#include <mach/ep93xx-regs.h>
|
||||
+#include <mach/platform.h>
|
||||
+#endif
|
||||
+
|
||||
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
|
||||
#include "compat.h"
|
||||
#endif
|
||||
@@ -953,9 +959,16 @@ static int c_show(struct seq_file *m, vo
|
||||
seq_puts(m, "\n");
|
||||
|
||||
seq_printf(m, "Hardware\t: %s\n", machine_name);
|
||||
+#if defined(CONFIG_ARCH_EP93XX)
|
||||
+ seq_printf(m, "Revision\t: %04x\n",
|
||||
+ ep93xx_chip_revision());
|
||||
+ seq_printf(m, "Serial\t\t: %016x\n",
|
||||
+ *((unsigned int *)EP93XX_SECURITY_UNIQID));
|
||||
+#else
|
||||
seq_printf(m, "Revision\t: %04x\n", system_rev);
|
||||
seq_printf(m, "Serial\t\t: %08x%08x\n",
|
||||
system_serial_high, system_serial_low);
|
||||
+#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
|
||||
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
|
||||
@@ -97,6 +97,8 @@
|
||||
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
|
||||
|
||||
#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
|
||||
+#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
|
||||
+#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
|
||||
|
||||
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
|
||||
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
|
||||
@ -0,0 +1,74 @@
|
||||
This patch makes SDHC cards work with the mmc_spi driver.
|
||||
|
||||
The problem is that they fail when reading the last block of the card using
|
||||
a multi-block read. This is because on SDHC the multiple block read has to be
|
||||
stopped with an explicit STOP command, which needs to be sent to the card
|
||||
while the incoming transfer is in progress.
|
||||
The 2.6.3[45] mmc-spi driver sends it after the last block transfer, so the
|
||||
SDHC card continues reading past the end of the card.
|
||||
This patch works around this by using single-block reads if we're reading the
|
||||
last blocks of the card.
|
||||
-martinwguy, 14 May 2010
|
||||
|
||||
Date: Thu, 29 Apr 2010 21:30:36 +0300
|
||||
From: Mika Westerberg <mika.westerberg@iki.fi>
|
||||
To: Martin Guy <martinwguy@gmail.com>
|
||||
|
||||
On Wed, Apr 21, 2010 at 02:10:08AM +0100, Martin Guy wrote:
|
||||
>
|
||||
> the SDHC cards I have don't work at all, spewing tons of:
|
||||
> mmcblk0: error -38 sending status comand
|
||||
> mmcblk0: error -38 sending read/write command, response 0x4, card status 0xff04
|
||||
> end_request: I/O error, dev mmcblk0, sector 7744509
|
||||
|
||||
I bought today a new 4GB SDHC card and with that I get similar
|
||||
errors that you are getting. I hacked around quick fix which seems
|
||||
to work in my case. I'm wondering whether you could check if it
|
||||
helps with your SDHC card as well?
|
||||
|
||||
This problem is easy to reproduce, just read last sector of the
|
||||
card (I wrote simple C program but running fdisk -l does the same).
|
||||
|
||||
Patch is below.
|
||||
|
||||
Thanks,
|
||||
MW
|
||||
|
||||
From: Mika Westerberg <mika.westerberg@iki.fi>
|
||||
Date: Thu, 29 Apr 2010 21:14:32 +0300
|
||||
Subject: [PATCH] mmc_block: use single block reads for last block on SPI
|
||||
|
||||
Some SD-cards fail when doing multiblock read for last block with SPI host. Real
|
||||
reason is not known but as workaround we can perform this last read using
|
||||
multiple single block reads.
|
||||
|
||||
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
|
||||
---
|
||||
drivers/mmc/card/block.c | 19 +++++++++++++++++++
|
||||
1 files changed, 19 insertions(+), 0 deletions(-)
|
||||
|
||||
--- a/drivers/mmc/card/block.c
|
||||
+++ b/drivers/mmc/card/block.c
|
||||
@@ -351,6 +351,22 @@ static int mmc_blk_issue_rw_rq(struct mm
|
||||
if (brq.data.blocks > card->host->max_blk_count)
|
||||
brq.data.blocks = card->host->max_blk_count;
|
||||
|
||||
+ if (mmc_host_is_spi(card->host)) {
|
||||
+ /*
|
||||
+ * Some SD-cards fail when we are reading last block
|
||||
+ * with multiblock read. In these cases we automatically
|
||||
+ * use single block reads. This only happens on SPI
|
||||
+ * hosts.
|
||||
+ */
|
||||
+ if (rq_data_dir(req) == READ && brq.data.blocks > 1) {
|
||||
+ sector_t s = blk_rq_pos(req) + brq.data.blocks;
|
||||
+
|
||||
+ if (s >= get_capacity(md->disk)) {
|
||||
+ disable_multi = 1;
|
||||
+ }
|
||||
+ }
|
||||
+ }
|
||||
+
|
||||
/*
|
||||
* After a read error, we redo the request one sector at a time
|
||||
* in order to accurately determine which sectors can be read
|
||||
1060
target/linux/ep93xx/patches-2.6.36/003-ep93xx_touchscreen.patch
Normal file
1060
target/linux/ep93xx/patches-2.6.36/003-ep93xx_touchscreen.patch
Normal file
File diff suppressed because it is too large
Load Diff
179
target/linux/ep93xx/patches-2.6.36/004-simone_add_mmc_spi.patch
Normal file
179
target/linux/ep93xx/patches-2.6.36/004-simone_add_mmc_spi.patch
Normal file
@ -0,0 +1,179 @@
|
||||
This enables the mmc-over-spi driver for the Sim.One board, based on Mika's
|
||||
patch, which used a GPIO for chip select in stead of the default SFRMOUT pin.
|
||||
I've modified it to use the usual SFRMOUT; if you've modified your Sim.One
|
||||
board to use a GPIO instead, uncomment and modify
|
||||
// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
|
||||
in the source file.
|
||||
-martinwguy, 14 May 2010
|
||||
|
||||
From: Mika Westerberg <mika.westerberg@iki.fi>
|
||||
Date: Wed, 28 Apr 2010 08:42:46 +0300
|
||||
Subject: [PATCH] ep93xx: simone: added board specific SPI support for MMC/SD cards
|
||||
|
||||
This includes setting up EGPIOs 0 and 9 for card detection and chip select
|
||||
respectively.
|
||||
|
||||
--- a/arch/arm/mach-ep93xx/simone.c
|
||||
+++ b/arch/arm/mach-ep93xx/simone.c
|
||||
@@ -18,12 +18,16 @@
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
+#include <linux/mmc/host.h>
|
||||
#include <linux/gpio.h>
|
||||
+#include <linux/spi/spi.h>
|
||||
+#include <linux/spi/mmc_spi.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/fb.h>
|
||||
+#include <mach/ep93xx_spi.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
@@ -38,6 +42,135 @@ static struct ep93xxfb_mach_info __initd
|
||||
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
|
||||
};
|
||||
|
||||
+/*
|
||||
+ * GPIO lines used for MMC card detection.
|
||||
+ */
|
||||
+#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
|
||||
+
|
||||
+/*
|
||||
+ * If you have hacked your Sim.One to use a GPIO as SD card chip select
|
||||
+ * (SD pin 1), uncomment the following line.
|
||||
+ * The example, EGPIO15, is on TP17 near the CPU.
|
||||
+ */
|
||||
+// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
|
||||
+
|
||||
+/*
|
||||
+ * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
|
||||
+ * you can leave these empty and pass NULL as .controller_data.
|
||||
+ */
|
||||
+
|
||||
+#ifdef MMC_CHIP_SELECT_GPIO
|
||||
+static int simone_mmc_spi_setup(struct spi_device *spi)
|
||||
+{
|
||||
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
|
||||
+ int err;
|
||||
+
|
||||
+ err = gpio_request(gpio, spi->modalias);
|
||||
+ if (err)
|
||||
+ return err;
|
||||
+
|
||||
+ err = gpio_direction_output(gpio, 1);
|
||||
+ if (err) {
|
||||
+ gpio_free(gpio);
|
||||
+ return err;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void simone_mmc_spi_cleanup(struct spi_device *spi)
|
||||
+{
|
||||
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
|
||||
+
|
||||
+ gpio_set_value(gpio, 1);
|
||||
+ gpio_direction_input(gpio);
|
||||
+ gpio_free(gpio);
|
||||
+}
|
||||
+
|
||||
+static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
|
||||
+{
|
||||
+ gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
|
||||
+}
|
||||
+
|
||||
+static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
|
||||
+ .setup = simone_mmc_spi_setup,
|
||||
+ .cleanup = simone_mmc_spi_cleanup,
|
||||
+ .cs_control = simone_mmc_spi_cs_control,
|
||||
+};
|
||||
+#endif
|
||||
+
|
||||
+/*
|
||||
+ * MMC card detection GPIO setup.
|
||||
+ */
|
||||
+static int simone_mmc_spi_init(struct device *dev,
|
||||
+ irqreturn_t (*irq_handler)(int, void *), void *mmc)
|
||||
+{
|
||||
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
|
||||
+ int irq, err;
|
||||
+
|
||||
+ err = gpio_request(gpio, dev_name(dev));
|
||||
+ if (err)
|
||||
+ return err;
|
||||
+
|
||||
+ err = gpio_direction_input(gpio);
|
||||
+ if (err)
|
||||
+ goto fail;
|
||||
+
|
||||
+ irq = gpio_to_irq(gpio);
|
||||
+ if (irq < 0)
|
||||
+ goto fail;
|
||||
+
|
||||
+ err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
|
||||
+ "MMC card detect", mmc);
|
||||
+ if (err)
|
||||
+ goto fail;
|
||||
+
|
||||
+ printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
|
||||
+ dev_name(dev), irq);
|
||||
+
|
||||
+ return 0;
|
||||
+fail:
|
||||
+ gpio_free(gpio);
|
||||
+ return err;
|
||||
+}
|
||||
+
|
||||
+static void simone_mmc_spi_exit(struct device *dev, void *mmc)
|
||||
+{
|
||||
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
|
||||
+
|
||||
+ free_irq(gpio_to_irq(gpio), mmc);
|
||||
+ gpio_free(gpio);
|
||||
+}
|
||||
+
|
||||
+static struct mmc_spi_platform_data simone_mmc_spi_data = {
|
||||
+ .init = simone_mmc_spi_init,
|
||||
+ .exit = simone_mmc_spi_exit,
|
||||
+ .detect_delay = 500,
|
||||
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
|
||||
+};
|
||||
+
|
||||
+static struct spi_board_info simone_spi_devices[] __initdata = {
|
||||
+ {
|
||||
+ .modalias = "mmc_spi",
|
||||
+#ifdef MMC_CHIP_SELECT_GPIO
|
||||
+ .controller_data = &simone_mmc_spi_ops,
|
||||
+#endif
|
||||
+ .platform_data = &simone_mmc_spi_data,
|
||||
+ /*
|
||||
+ * We use 10 MHz even though the maximum is 3.7 MHz. The driver
|
||||
+ * will limit it automatically to max. frequency.
|
||||
+ */
|
||||
+ .max_speed_hz = 10 * 1000 * 1000,
|
||||
+ .bus_num = 0,
|
||||
+ .chip_select = 0,
|
||||
+ .mode = SPI_MODE_3,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct ep93xx_spi_info simone_spi_info __initdata = {
|
||||
+ .num_chipselect = ARRAY_SIZE(simone_spi_devices),
|
||||
+};
|
||||
+
|
||||
static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
|
||||
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
|
||||
.sda_is_open_drain = 0,
|
||||
@@ -61,6 +194,8 @@ static void __init simone_init_machine(v
|
||||
ep93xx_register_fb(&simone_fb_info);
|
||||
ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
|
||||
ARRAY_SIZE(simone_i2c_board_info));
|
||||
+ ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
|
||||
+ ARRAY_SIZE(simone_spi_devices));
|
||||
}
|
||||
|
||||
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
|
||||
Loading…
Reference in New Issue
Block a user