ramips: add support for Nexx WT1520

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 42867

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -210,6 +210,9 @@ case $board in
 		set_usb_led "wr8305rt:usb"
 		set_wifi_led "wr8305rt:wifi"
 		;;
+	wt1520)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
 	y1 |\
 	y1s)
 		ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"

target/linux/ramips/base-files/etc/board.d/02_network

@@ -110,7 +110,8 @@ ramips_setup_interfaces()
 	dir-615-h1 | \
 	hlk-rm04 | \
 	mzk-w300nh2 | \
-	mzk-750dhp)
+	mzk-750dhp | \
+	wt1520)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
 		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"

target/linux/ramips/base-files/etc/diag.sh

@@ -167,6 +167,9 @@ get_status_led() {
 	wnce2001)
 		status_led="netgear:green:power"
 		;;
+	nexx-wt1520)
+		status_led="nexx-wt1520:white:power"
+		;;
 	mzk-w300nh2)
 		status_led="mzkw300nh2:green:power"
 		;;

target/linux/ramips/base-files/lib/ramips.sh

@@ -181,6 +181,9 @@ ramips_board_detect() {
 	*"NexAira BC2")
 		name="bc2"
 		;;
+	*"Nexx WT1520")
+		name="wt1520"
+		;;
 	*"NW718")
 		name="nw718"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -90,6 +90,7 @@ platform_check_image() {
 	wnce2001 | \
 	wli-tx4-ag300n | \
 	whr-g300n |\
+	wt1520 |\
 	ur-326n4g |\
 	ur-336un |\
 	wr512-3gn |\

target/linux/ramips/dts/WT1520.dts

@@ -0,0 +1,83 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "NEXXWT1520", "ralink,rt5350-soc";
+	model = "Nexx WT1520";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,57600";
+	};
+
+	palmbus@10000000 {
+		uart@500 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q32";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "s25fl064k";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "jtag";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+};

target/linux/ramips/image/Makefile

@@ -550,6 +550,13 @@ Image/Build/Profile/WNCE2001=$(call BuildFirmware/WNCE2001/$(1),$(1),wnce2001,WN
 
 Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN)
 
+define BuildFirmware/WT1520/initramfs
+	$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+endef
+BuildFirmware/WT1520/squashfs=$(call BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4))
+
+Image/Build/Profile/WT1520=$(call BuildFirmware/WT1520/$(1),$(1),wt1520,WT1520,WT1520)
+
 Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G)
 
 Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,UR-336UN)
@@ -638,6 +645,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WNCE2001,$(1))
 	$(call Image/Build/Profile/WR512-3GN,$(1))
 	$(call Image/Build/Profile/WR6202,$(1))
+	$(call Image/Build/Profile/WT1520,$(1))
 	$(call Image/Build/Profile/X5,$(1))
 	$(call Image/Build/Profile/X8,$(1))
 	$(call Image/Build/Profile/XDXRN502J,$(1))

target/linux/ramips/rt305x/profiles/nexx.mk

@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WT1520
+	NAME:=Nexx WT1520
+	PACKAGES:=kmod-usb2
+endef
+
+define Profile/WT1520/Description
+	Package set for WT1520
+endef
+
+$(eval $(call Profile,WT1520))