ramips: Add support for D-Link DCH-M225
D-Link DCH-M225 is based on Mediatek MT7620 with 64MB ram, 8MB flash, 3.5mm audio out support. but no ethernet and usb ports. so you must default enable wifi. Signed-off-by: Michael Lee <igvtee@gmail.com>
This commit is contained in:
Michael Lee
John Crispin
parent
36d98e6c7a
commit
c3e420f28c
@ -100,6 +100,10 @@ d105)
|
||||
db-wrt01)
|
||||
ucidef_set_led_default "power" "power" "$board:orange:power" "1"
|
||||
;;
|
||||
dch-m225)
|
||||
ucidef_set_led_default "power" "POWER" "$board:geeen:power" "1"
|
||||
ucidef_set_led_default "status" "STATUS" "$board:red:status" "0"
|
||||
;;
|
||||
dcs-930l-b1)
|
||||
ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
|
||||
ucidef_set_led_netdev "wifi" "WiFi" "$board:blue:wps"
|
||||
|
||||
@ -166,6 +166,7 @@ ramips_setup_interfaces()
|
||||
;;
|
||||
cs-qr10|\
|
||||
d105|\
|
||||
dch-m225|\
|
||||
hpm|\
|
||||
mzk-ex300np|\
|
||||
mzk-ex750np|\
|
||||
@ -285,6 +286,9 @@ ramips_setup_macs()
|
||||
wan_mac=$(mtd_get_mac_binary devdata 7)
|
||||
;;
|
||||
cy-swr1100|\
|
||||
dch-m225)
|
||||
lan_mac=$(mtd_get_mac_ascii factory lanmac)
|
||||
;;
|
||||
dir-645)
|
||||
lan_mac=$(mtd_get_mac_ascii nvram lanmac)
|
||||
wan_mac=$(mtd_get_mac_ascii nvram wanmac)
|
||||
|
||||
@ -19,6 +19,7 @@ get_status_led() {
|
||||
asl26555|\
|
||||
br-6425|\
|
||||
br-6475nd|\
|
||||
dch-m225|\
|
||||
dir-860l-b1|\
|
||||
e1700|\
|
||||
fonera20n|\
|
||||
|
||||
@ -15,6 +15,7 @@ board=$(ramips_board_name)
|
||||
|
||||
case "$board" in
|
||||
cy-swr1100 | \
|
||||
dch-m225 | \
|
||||
dir-645 | \
|
||||
dir-860l-b1)
|
||||
fix_seama_header
|
||||
|
||||
@ -106,6 +106,9 @@ ramips_board_detect() {
|
||||
*"DB-WRT01")
|
||||
name="db-wrt01"
|
||||
;;
|
||||
*"DCH-M225")
|
||||
name="dch-m225"
|
||||
;;
|
||||
*"DCS-930")
|
||||
name="dcs-930"
|
||||
;;
|
||||
|
||||
@ -193,6 +193,7 @@ platform_check_image() {
|
||||
return 0
|
||||
;;
|
||||
cy-swr1100|\
|
||||
dch-m225|\
|
||||
dir-610-a1|\
|
||||
dir-645|\
|
||||
dir-860l-b1)
|
||||
|
||||
184
target/linux/ramips/dts/DCH-M225.dts
Normal file
184
target/linux/ramips/dts/DCH-M225.dts
Normal file
@ -0,0 +1,184 @@
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "mt7620a.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dch-m225", "ralink,mt7620a-soc";
|
||||
model = "D-Link DCH-M225";
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <100>;
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 11 1>;
|
||||
linux,code = <0x211>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio1 2 1>;
|
||||
linux,code = <0x198>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
label = "dch-m225:green:power";
|
||||
gpios = <&gpio1 5 1>;
|
||||
};
|
||||
|
||||
status {
|
||||
label = "dch-m225:red:status";
|
||||
gpios = <&gpio1 0 1>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "Audio-I2S";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,bitclock-master = <&dailink0_master>;
|
||||
simple-audio-card,frame-master = <&dailink0_master>;
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphones";
|
||||
simple-audio-card,routing =
|
||||
"Headphones", "HP_L",
|
||||
"Headphones", "HP_R";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,hp-det-gpio = <&gpio0 14 1>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s>;
|
||||
};
|
||||
|
||||
dailink0_master: simple-audio-card,codec {
|
||||
sound-dai = <&codec>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
|
||||
codec: wm8960@1a {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
|
||||
wlf,shared-lrclk;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_i2s_pins>, <&wm8960_mclk_pins>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
linux,modalias = "m25p80";
|
||||
spi-max-frequency = <80000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x4000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@34000 {
|
||||
label = "factory";
|
||||
reg = <0x34000 0x4000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
nvram: partition@38000 {
|
||||
label = "nvram";
|
||||
reg = <0x38000 0x8000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "devconf";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "upgrade_rec";
|
||||
reg = <0x50000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@150000 {
|
||||
label = "firmware";
|
||||
reg = <0x150000 0x6b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gdma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "wdt", "rgmii1";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
|
||||
pa {
|
||||
ralink,group = "pa";
|
||||
ralink,function = "pa";
|
||||
};
|
||||
|
||||
wm8960_mclk_pins: wm8960_mclk {
|
||||
wm8960_mclk {
|
||||
ralink,group = "mdio";
|
||||
ralink,function = "refclk";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x4>;
|
||||
};
|
||||
|
||||
&gsw {
|
||||
ralink,port4 = "ephy";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
ralink,mtd-eeprom = <&factory 0>;
|
||||
};
|
||||
|
||||
@ -323,6 +323,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
gpio_i2s_pins: gpio_i2s {
|
||||
gpio_i2s {
|
||||
ralink,group = "uartf";
|
||||
ralink,function = "gpio i2s";
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi {
|
||||
spi {
|
||||
ralink,group = "spi";
|
||||
|
||||
@ -41,6 +41,15 @@ define Build/elecom-header
|
||||
$(STAGING_DIR_HOST)/bin/tar -cf $@ -C $(KDIR) v_0.0.0.bin v_0.0.0.md5
|
||||
endef
|
||||
|
||||
define Build/seama
|
||||
$(STAGING_DIR_HOST)/bin/seama -i $@ $(1)
|
||||
mv $@.seama $@
|
||||
endef
|
||||
|
||||
define Build/seama-seal
|
||||
$(call Build/seama,-s $@.seama $(1))
|
||||
endef
|
||||
|
||||
define Device/ArcherC20i
|
||||
DTS := ArcherC20i
|
||||
KERNEL := $(KERNEL_DTB)
|
||||
@ -413,3 +422,22 @@ define Device/tiny-ac
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
||||
endef
|
||||
TARGET_DEVICES += tiny-ac
|
||||
|
||||
dch_m225_mtd_size=7012352
|
||||
define Device/dch-m225
|
||||
DTS := DCH-M225
|
||||
IMAGES += factory.bin
|
||||
IMAGE_SIZE := $(dch_m225_mtd_size)
|
||||
IMAGE/sysupgrade.bin := \
|
||||
append-kernel | pad-offset 65536 64 | append-rootfs | \
|
||||
seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
|
||||
pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/factory.bin := \
|
||||
append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
|
||||
seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
|
||||
seama-seal -m "signature=wapn22_dlink.2013gui_dap1320b" | \
|
||||
check-size $$$$(IMAGE_SIZE)
|
||||
DEVICE_TITLE := D-Link DCH-M225
|
||||
DEVICE_PACKAGES := kmod-mt76
|
||||
endef
|
||||
TARGET_DEVICES += dch-m225
|
||||
|
||||
Loading…
Reference in New Issue
Block a user