imx6: update gw5400-a dts
- remove common imx6q-ventana.dtsi - there isn't enough commonality to warrent this - rename user led's to 1-based - add alises used by bootloader - clean up iomux gpios - fix pfuze slave address - enable sata - add delay after release of pci reset downstream from PCIe switch - remove PCIe clock configuration as its now handled in updated driver Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 38081
This commit is contained in:
Luka Perkov
parent
3f059f58db
commit
c90e521790
@ -10,16 +10,43 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx6q-ventana.dtsi"
|
||||
#include "imx6q.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Gateworks Ventana GW5400-A";
|
||||
compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
|
||||
|
||||
/* these are used by bootloader for disabling nodes */
|
||||
aliases {
|
||||
ethernet0 = &fec;
|
||||
ethernet1 = ð1;
|
||||
sky2 = ð1;
|
||||
ssi0 = &ssi1;
|
||||
ssi1 = &ssi2;
|
||||
ipu0 = &ipu1;
|
||||
ipu1 = &ipu2;
|
||||
usdhc0 = &usdhc1;
|
||||
usdhc1 = &usdhc2;
|
||||
usdhc2 = &usdhc3;
|
||||
usdhc3 = &usdhc4;
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c2;
|
||||
i2c2 = &i2c3;
|
||||
usb0 = &usbh3;
|
||||
usb1 = &usbotg;
|
||||
spi0 = &ecspi1;
|
||||
spi1 = &ecspi2;
|
||||
spi2 = &ecspi3;
|
||||
spi3 = &ecspi4;
|
||||
spi4 = &ecspi5;
|
||||
pwm0 = &pwm1;
|
||||
pwm1 = &pwm2;
|
||||
pwm2 = &pwm3;
|
||||
pwm3 = &pwm4;
|
||||
can0 = &can1;
|
||||
led0 = &led0;
|
||||
led1 = &led1;
|
||||
led2 = &led2;
|
||||
};
|
||||
|
||||
/* SDRAM addressing */
|
||||
@ -34,20 +61,23 @@
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0: user0 {
|
||||
label = "user0";
|
||||
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG# */
|
||||
led0: user1 {
|
||||
label = "user1";
|
||||
gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
|
||||
default-state = "on";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led1: user1 {
|
||||
label = "user1";
|
||||
gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR# */
|
||||
led1: user2 {
|
||||
label = "user2";
|
||||
gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2: user2 {
|
||||
label = "user2";
|
||||
gpios = <&gpio4 15 0>; /* 111 -> MX6_LOCLEDR# */
|
||||
led2: user3 {
|
||||
label = "user3";
|
||||
gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
@ -102,34 +132,23 @@
|
||||
hog {
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
/* USB OTG Power Enable */
|
||||
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000
|
||||
|
||||
/* 3:19 SPINOR_CS0# */
|
||||
MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000
|
||||
|
||||
/* 1:09 MX6_DIO0 (could also be PWM1_PWM0) */
|
||||
MX6Q_PAD_GPIO_9__GPIO1_IO09 0x80000000
|
||||
/* 1:19 MX6_DIO1 (could also be PWM2_PWM0) */
|
||||
MX6Q_PAD_SD1_DAT2__GPIO1_IO19 0x80000000
|
||||
/* 2:09 MX6_DIO2 (could also be PWM3_PWM0) */
|
||||
MX6Q_PAD_SD4_DAT1__GPIO2_IO09 0x80000000
|
||||
/* 2:10 MX6_DIO3 (could also be PWM3_PWM0) */
|
||||
MX6Q_PAD_SD4_DAT2__GPIO2_IO10 0x80000000
|
||||
|
||||
/* 1:16 USBHUB_RST# */
|
||||
MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000
|
||||
|
||||
/* PCIE IRQ */
|
||||
MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000
|
||||
/* PCIE RST */
|
||||
MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x08000000
|
||||
|
||||
/* 1:12 MIPI_DIO */
|
||||
MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000
|
||||
|
||||
/* AUD4_MCK */
|
||||
MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000
|
||||
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
|
||||
MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
|
||||
MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user0 led */
|
||||
MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user1 led */
|
||||
MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user2 led */
|
||||
/* let bootloader choose these based on hwconfig */
|
||||
#if 0
|
||||
MX6Q_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* MX6_DIO0 (or PWM1_PWM0) */
|
||||
MX6Q_PAD_SD1_DAT2__GPIO1_IO19 0x80000000 /* MX6_DIO1 (or PWM2_PWM0) */
|
||||
MX6Q_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* MX6_DIO2 (or PWM3_PWM0) */
|
||||
MX6Q_PAD_SD4_DAT2__GPIO2_IO10 0x80000000 /* MX6_DIO3 (or PWM3_PWM0) */
|
||||
#endif
|
||||
MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
|
||||
MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
|
||||
MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x08000000 /* PCIE RST */
|
||||
MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
|
||||
MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 /* AUD4_MCK */
|
||||
>;
|
||||
};
|
||||
};
|
||||
@ -262,7 +281,6 @@
|
||||
&can1 {
|
||||
reg = <0x02090000 0x4000>;
|
||||
interrupts = <0 110 0x04>;
|
||||
//clock-frequency
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -271,7 +289,7 @@
|
||||
};
|
||||
|
||||
&pcie {
|
||||
reset-gpios = <&gpio1 29 0>;
|
||||
reset-gpio = <&gpio1 29 0>;
|
||||
status = "okay";
|
||||
|
||||
eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
||||
@ -365,7 +383,7 @@
|
||||
|
||||
pmic: pfuze@08 {
|
||||
compatible = "fsl,pfuze100";
|
||||
reg = <0x0a>;
|
||||
reg = <0x08>;
|
||||
};
|
||||
|
||||
pciswitch: pex8609@3f {
|
||||
@ -426,3 +444,7 @@
|
||||
crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -1,51 +0,0 @@
|
||||
/*
|
||||
* Copyright 2013 Gateworks Corporation
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
#include "imx6q.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Gateworks Ventana";
|
||||
system-serial = "";
|
||||
|
||||
// these are used by bootloader for disabling nodes
|
||||
aliases {
|
||||
// ethernet0 = ð0;
|
||||
// ethernet1 = ð1;
|
||||
ssi0 = &ssi1;
|
||||
ssi1 = &ssi2;
|
||||
ipu0 = &ipu1;
|
||||
ipu1 = &ipu2;
|
||||
// mipi_csi = &mipi_csi;
|
||||
// mipi_dsi = &mipi_dsi;
|
||||
usdhc0 = &usdhc1;
|
||||
usdhc1 = &usdhc2;
|
||||
usdhc2 = &usdhc3;
|
||||
usdhc3 = &usdhc4;
|
||||
i2c0 = &i2c1;
|
||||
i2c1 = &i2c2;
|
||||
i2c2 = &i2c3;
|
||||
usb0 = &usbh3;
|
||||
usb1 = &usbotg;
|
||||
spi0 = &ecspi1;
|
||||
spi1 = &ecspi2;
|
||||
spi2 = &ecspi3;
|
||||
spi3 = &ecspi4;
|
||||
spi4 = &ecspi5;
|
||||
pwm0 = &pwm1;
|
||||
pwm1 = &pwm2;
|
||||
pwm2 = &pwm3;
|
||||
pwm3 = &pwm4;
|
||||
can0 = &can1;
|
||||
led0 = &led0;
|
||||
led1 = &led1;
|
||||
led2 = &led2;
|
||||
};
|
||||
};
|
||||
@ -25,7 +25,38 @@
|
||||
};
|
||||
|
||||
ecspi1 {
|
||||
@@ -205,6 +213,12 @@
|
||||
@@ -187,6 +195,30 @@
|
||||
MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
|
||||
>;
|
||||
};
|
||||
+
|
||||
+ /* No strobe */
|
||||
+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
|
||||
+ fsl,pins = <
|
||||
+ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
||||
+ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
|
||||
+ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
||||
+ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
||||
+ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
||||
+ >;
|
||||
+ };
|
||||
};
|
||||
|
||||
i2c1 {
|
||||
@@ -205,6 +237,12 @@
|
||||
MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
@ -38,7 +69,7 @@
|
||||
};
|
||||
|
||||
i2c3 {
|
||||
@@ -214,6 +228,12 @@
|
||||
@@ -214,6 +252,12 @@
|
||||
MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
@ -51,7 +82,7 @@
|
||||
};
|
||||
|
||||
uart1 {
|
||||
@@ -223,6 +243,12 @@
|
||||
@@ -223,6 +267,12 @@
|
||||
MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
@ -64,7 +95,7 @@
|
||||
};
|
||||
|
||||
uart2 {
|
||||
@@ -232,6 +258,21 @@
|
||||
@@ -232,6 +282,21 @@
|
||||
MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
@ -86,7 +117,7 @@
|
||||
};
|
||||
|
||||
uart4 {
|
||||
@@ -242,6 +283,15 @@
|
||||
@@ -242,6 +307,15 @@
|
||||
>;
|
||||
};
|
||||
};
|
||||
@ -112,7 +143,7 @@
|
||||
#include <linux/phy.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/micrel_phy.h>
|
||||
@@ -145,6 +146,65 @@ static void __init imx6q_sabrelite_init(
|
||||
@@ -145,6 +146,38 @@ static void __init imx6q_sabrelite_init(
|
||||
imx6q_sabrelite_cko1_setup();
|
||||
}
|
||||
|
||||
@ -137,48 +168,21 @@
|
||||
+ pci_read_config_dword(dev, 0x644, &dw);
|
||||
+ dw |= 0xfe; // GPIO1-7 output high
|
||||
+ pci_write_config_dword(dev, 0x644, dw);
|
||||
+
|
||||
+ mdelay(1);
|
||||
+}
|
||||
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609,
|
||||
+ mx6_ventana_pciesw_early_fixup);
|
||||
+
|
||||
+/*
|
||||
+ * configure PCIe core clock and PCIe ref clock
|
||||
+ *
|
||||
+ * TODO: disable CLK1 output and use CLK2 input from si52147 as PCIe ref
|
||||
+ */
|
||||
+static void __init imx6q_ventana_pcie_setup(void)
|
||||
+{
|
||||
+ struct clk *axi_sel, *axi, *ref;
|
||||
+
|
||||
+ axi_sel = clk_get_sys(NULL, "pcie_axi_sel");
|
||||
+ axi = clk_get_sys(NULL, "axi");
|
||||
+ ref = clk_get_sys(NULL, "pcie_ref_125m");
|
||||
+ if (IS_ERR(axi_sel) || IS_ERR(axi) || IS_ERR(ref)) {
|
||||
+ pr_err("pcie setup failed - can't get clocks\n");
|
||||
+ goto put_clk;
|
||||
+ }
|
||||
+ clk_set_parent(axi_sel, axi);
|
||||
+ clk_prepare_enable(ref);
|
||||
+
|
||||
+put_clk:
|
||||
+ if (!IS_ERR(axi_sel))
|
||||
+ clk_put(axi_sel);
|
||||
+ if (!IS_ERR(axi))
|
||||
+ clk_put(axi);
|
||||
+ if (!IS_ERR(ref))
|
||||
+ clk_put(ref);
|
||||
+}
|
||||
+
|
||||
+static void __init imx6q_ventana_init(void)
|
||||
+{
|
||||
+ imx6q_ventana_pcie_setup();
|
||||
+ imx6q_sabrelite_cko1_setup();
|
||||
+}
|
||||
+
|
||||
static void __init imx6q_1588_init(void)
|
||||
{
|
||||
struct regmap *gpr;
|
||||
@@ -163,6 +223,9 @@ static void __init imx6q_usb_init(void)
|
||||
@@ -163,6 +196,9 @@ static void __init imx6q_usb_init(void)
|
||||
|
||||
static void __init imx6q_init_machine(void)
|
||||
{
|
||||
|
||||
Loading…
Reference in New Issue
Block a user