mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity

ar71xx: add support for gl-ar300m

Browse Source 
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
This commit is contained in:
Zhao Gang 2016-07-15 10:00:04 +00:00 committed by Jo-Philipp Wich
parent 6c2651566c
commit d963ddf042
12 changed files with 218 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
package/boot/uboot-envtools/files/ar71xx
View File

@ -22,6 +22,7 @@ carambola2 | \
cr3000 | \
cr5000 | \
eap300v2 | \
gl-ar300m | \
hornet-ub | \
hornet-ub-x2 | \
jwap230 | \

4
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -262,6 +262,10 @@ gl-ar300)
ucidef_set_led_wlan "wlan" "WLAN" "gl_ar300:wlan" "phy0tpt"
;;
gl-ar300m)
ucidef_set_led_wlan "wlan" "WLAN" "gl-ar300m:wlan" "phy0tpt"
;;
gl-domino)
ucidef_set_led_wlan "wlan" "WLAN" "domino:blue:wlan" "phy0tpt"
;;

1
target/linux/ar71xx/base-files/etc/board.d/02_network
View File

@ -391,6 +391,7 @@ alfa-ap96 |\
alfa-nx |\
ap83 |\
gl-ar150 |\
gl-ar300m |\
gl-domino |\
gl-inet |\
jwap003 |\

3
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -451,6 +451,9 @@ set_state() {
done)
status_led_on
case $(ar71xx_board_name) in
gl-ar300m)
fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0
;;
qihoo-c301)
local n=$(fw_printenv activeregion | cut -d = -f 2)
fw_setenv "image${n}trynum" 0

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -536,6 +536,9 @@ ar71xx_board_detect() {
*"GL AR300")
name="gl-ar300"
;;
*"GL-AR300M")
name="gl-ar300m"
;;
*"EnGenius EPG5000")
name="epg5000"
;;

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -233,6 +233,7 @@ platform_check_image() {
ew-dorin-router | \
gl-ar150 | \
gl-ar300 | \
gl-ar300m | \
gl-domino | \
hiwifi-hc6361 | \
hornet-ub-x2 | \

1
target/linux/ar71xx/config-4.4
View File

@ -89,6 +89,7 @@ CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y
CONFIG_ATH79_MACH_GL_AR150=y
CONFIG_ATH79_MACH_GL_AR300=y
CONFIG_ATH79_MACH_GL_AR300M=y
CONFIG_ATH79_MACH_GL_DOMINO=y
CONFIG_ATH79_MACH_GL_INET=y
CONFIG_ATH79_MACH_GS_MINIBOX_V1=y

10
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -604,6 +604,16 @@ config ATH79_MACH_GL_AR300
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_GL_AR300M
bool "GL_AR300M support"
select SOC_QCA953X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_GL_DOMINO
bool "DOMINO support"
select SOC_AR933X

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -93,6 +93,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o
obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o

182
target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c Normal file
View File

@ -0,0 +1,182 @@
/*
* GLI AR300M(D) board support
*
* Copyright (C) 2011 dongyuqi <729650915@qq.com>
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2013 alzhao <alzhao@gmail.com>
* Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/pci.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-spi.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define GL_AR300M_GPIO_LED_USB 2
#define GL_AR300M_GPIO_LED_WLAN 14
#define GL_AR300M_GPIO_LED_LAN 13
#define GL_AR300M_GPIO_LED_SYSTEM 12
#define GL_AR300M_GPIO_BTN_RESET 3
#define GL_AR300M_GPIO_BTN_LEFT 0
#define GL_AR300M_GPIO_BTN_RIGHT 1
#define GL_AR300M_KEYS_POLL_INTERVAL 20 /* msecs */
#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300M_KEYS_POLL_INTERVAL)
#define GL_AR300M_MAC0_OFFSET 0
#define GL_AR300M_MAC1_OFFSET 6
#define GL_AR300M_WMAC_CALDATA_OFFSET 0x1000
#define GL_AR300M_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
{
.name = "gl-ar300m:usb",
.gpio = GL_AR300M_GPIO_LED_USB,
.active_low = 0,
.default_state = 1,
},
{
.name = "gl-ar300m:wlan",
.gpio = GL_AR300M_GPIO_LED_WLAN,
.active_low = 1,
},
{
.name = "gl-ar300m:lan",
.gpio = GL_AR300M_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "gl-ar300m:system",
.gpio = GL_AR300M_GPIO_LED_SYSTEM,
.active_low = 1,
.default_state = 1,
},
};
static struct gpio_keys_button gl_ar300m_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
.gpio = GL_AR300M_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "button right",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
.gpio = GL_AR300M_GPIO_BTN_LEFT,
.active_low = 0,
},
{
.desc = "button left",
.type = EV_KEY,
.code = BTN_1,
.debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
.gpio = GL_AR300M_GPIO_BTN_RIGHT,
.active_low = 0,
},
};
static struct ath79_spi_controller_data gl_ar300m_spi0_cdata =
{
.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
.is_flash = true,
.cs_line = 0,
};
static struct ath79_spi_controller_data gl_ar300m_spi1_cdata =
{
.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
.is_flash = false,
.cs_line = 1,
};
static struct spi_board_info gl_ar300m_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
.controller_data = &gl_ar300m_spi0_cdata,
.platform_data = NULL,
},
{
.bus_num = 0,
.chip_select = 1,
.max_speed_hz = 25000000,
.modalias = "ath79-spinand",
.controller_data = &gl_ar300m_spi1_cdata,
.platform_data = NULL,
}
};
static struct ath79_spi_platform_data gl_ar300m_spi_data = {
.bus_num = 0,
.num_chipselect = 2,
};
static void __init gl_ar300m_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 tmpmac[ETH_ALEN];
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2);
/* register gpio LEDs and keys */
ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio),
gl_ar300m_leds_gpio);
ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL,
ARRAY_SIZE(gl_ar300m_gpio_keys),
gl_ar300m_gpio_keys);
ath79_register_mdio(0, 0x0);
/* WAN */
ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR300M_MAC0_OFFSET, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(4);
ath79_register_eth(0);
/* LAN */
ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR300M_MAC1_OFFSET, 0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_switch_data.phy_poll_mask |= BIT(4);
ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0);
ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac);
/* enable usb */
ath79_register_usb();
/* enable pci */
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_GL_AR300M, "GL-AR300M", "GL-AR300M",
gl_ar300m_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -86,6 +86,7 @@ enum ath79_mach_type {
ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
ATH79_MACH_GL_AR150, /* GL-AR150 support */
ATH79_MACH_GL_AR300, /* GL-AR300 */
ATH79_MACH_GL_AR300M, /* GL-AR300M */
ATH79_MACH_GL_DOMINO, /* Domino */
ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */

10
target/linux/ar71xx/image/generic.mk
View File

@ -57,6 +57,16 @@ define Device/gl-ar300
endef
TARGET_DEVICES += gl-ar300
define Device/gl-ar300m
DEVICE_TITLE := GL AR300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 uboot-envtools
BOARDNAME = GL-AR300M
IMAGE_SIZE = 16000k
CONSOLE = ttyS0,115200
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar300m
define Device/gl-domino
DEVICE_TITLE := GL Domino Pi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2