ar71xx: add support for D-Link DAP-2695 rev. A1
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
This commit is contained in:
Stijn Tintel
parent
6b0d279ca5
commit
e3875350f3
@ -54,6 +54,7 @@ om2p-lc)
|
||||
dr531)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0xf800" "0x10000"
|
||||
;;
|
||||
dap-2695-a1 | \
|
||||
wzr-hp-ag300h)
|
||||
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
|
||||
;;
|
||||
|
||||
@ -174,6 +174,11 @@ rb-2011uias-2hnd)
|
||||
ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04"
|
||||
ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02"
|
||||
;;
|
||||
dap-2695-a1)
|
||||
ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
|
||||
ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0"
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:green:wlan2g" "phy1tpt"
|
||||
;;
|
||||
dhp-1565-a1)
|
||||
ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20"
|
||||
;;
|
||||
|
||||
@ -230,6 +230,9 @@ ar71xx_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
|
||||
;;
|
||||
dap-2695-a1)
|
||||
ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
|
||||
;;
|
||||
db120|\
|
||||
rb-2011l|\
|
||||
rb-2011uas|\
|
||||
|
||||
@ -47,6 +47,10 @@ board=$(ar71xx_board_name)
|
||||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
dap-2695-a1)
|
||||
ath10kcal_extract "radiocfg" 20480 2116
|
||||
ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
|
||||
;;
|
||||
dlan-pro-1200-ac)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
;;
|
||||
|
||||
@ -11,9 +11,18 @@ fixtrx() {
|
||||
mtd -o 32 fixtrx firmware
|
||||
}
|
||||
|
||||
fixwrgg() {
|
||||
local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
|
||||
|
||||
[ "$kernel_size" ] && mtd -c 0x$kernel_size fixwrgg firmware
|
||||
}
|
||||
|
||||
case "$board" in
|
||||
mynet-rext |\
|
||||
wrt160nl)
|
||||
fixtrx
|
||||
;;
|
||||
dap-2695-a1)
|
||||
fixwrgg
|
||||
;;
|
||||
esac
|
||||
|
||||
@ -511,6 +511,9 @@ ar71xx_board_detect() {
|
||||
*CR5000)
|
||||
name="cr5000"
|
||||
;;
|
||||
*"DAP-2695 rev. A1")
|
||||
name="dap-2695-a1"
|
||||
;;
|
||||
*"DB120 reference board")
|
||||
name="db120"
|
||||
;;
|
||||
|
||||
@ -105,6 +105,10 @@ seama_get_type_magic() {
|
||||
get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
||||
}
|
||||
|
||||
wrgg_get_image_magic() {
|
||||
get_image "$@" | dd bs=4 count=1 skip=8 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
|
||||
}
|
||||
|
||||
cybertan_get_image_magic() {
|
||||
get_image "$@" | dd bs=8 count=1 skip=0 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"'
|
||||
}
|
||||
@ -531,6 +535,15 @@ platform_check_image() {
|
||||
|
||||
return 0
|
||||
;;
|
||||
dap-2695-a1)
|
||||
local magic=$(wrgg_get_image_magic "$1")
|
||||
[ "$magic" != "21030820" ] && {
|
||||
echo "Invalid image, bad type: $magic"
|
||||
return 1
|
||||
}
|
||||
|
||||
return 0;
|
||||
;;
|
||||
esac
|
||||
|
||||
echo "Sysupgrade is not yet supported on $board."
|
||||
|
||||
@ -64,6 +64,7 @@ CONFIG_ATH79_MACH_CF_E316N_V2=y
|
||||
CONFIG_ATH79_MACH_CPE510=y
|
||||
CONFIG_ATH79_MACH_CR3000=y
|
||||
CONFIG_ATH79_MACH_CR5000=y
|
||||
CONFIG_ATH79_MACH_DAP_2695_A1=y
|
||||
CONFIG_ATH79_MACH_DB120=y
|
||||
CONFIG_ATH79_MACH_DGL_5500_A1=y
|
||||
CONFIG_ATH79_MACH_DHP_1565_A1=y
|
||||
|
||||
@ -1698,3 +1698,12 @@ config ATH79_MACH_QIHOO_C301
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_NVRAM
|
||||
|
||||
config ATH79_MACH_DAP_2695_A1
|
||||
bool "D-Link DAP-2695 rev. A1 support"
|
||||
select SOC_QCA955X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
@ -70,6 +70,7 @@ obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
|
||||
obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
|
||||
obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o
|
||||
obj-$(CONFIG_ATH79_MACH_DAP_2695_A1) += mach-dap-2695-a1.o
|
||||
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
|
||||
obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o
|
||||
obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
|
||||
|
||||
191
target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c
Normal file
191
target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c
Normal file
@ -0,0 +1,191 @@
|
||||
/*
|
||||
* D-Link DAP-2695 rev. A1 support
|
||||
*
|
||||
* Copyright (c) 2012 Qualcomm Atheros
|
||||
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (c) 2016 Stijn Tintel <stijn@linux-ipv6.be>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "pci.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "nvram.h"
|
||||
|
||||
#define DAP2695_GPIO_LED_GREEN_POWER 23
|
||||
#define DAP2695_GPIO_LED_RED_POWER 14
|
||||
#define DAP2695_GPIO_LED_WLAN_2G 13
|
||||
|
||||
#define DAP2695_GPIO_BTN_RESET 17
|
||||
|
||||
#define DAP2695_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define DAP2695_KEYS_DEBOUNCE_INTERVAL (3 * DAP2695_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define DAP2695_NVRAM_ADDR 0x1f040000
|
||||
#define DAP2695_NVRAM_SIZE 0x10000
|
||||
|
||||
#define DAP2695_MAC0_OFFSET 1
|
||||
#define DAP2695_MAC1_OFFSET 2
|
||||
#define DAP2695_WMAC_CALDATA_OFFSET 0x1000
|
||||
|
||||
static struct gpio_led dap2695_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "d-link:green:power",
|
||||
.gpio = DAP2695_GPIO_LED_GREEN_POWER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "d-link:red:power",
|
||||
.gpio = DAP2695_GPIO_LED_RED_POWER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "d-link:green:wlan2g",
|
||||
.gpio = DAP2695_GPIO_LED_WLAN_2G,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button dap2695_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Soft reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = DAP2695_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = DAP2695_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg dap2695_ar8327_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_RGMII,
|
||||
.txclk_delay_en = true,
|
||||
.rxclk_delay_en = true,
|
||||
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
||||
.mac06_exchange_dis = true,
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg dap2695_ar8327_pad6_cfg = {
|
||||
.mode = AR8327_PAD_MAC_SGMII,
|
||||
.sgmii_delay_en = true,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data dap2695_ar8327_data = {
|
||||
.pad0_cfg = &dap2695_ar8327_pad0_cfg,
|
||||
.pad6_cfg = &dap2695_ar8327_pad6_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
.port6_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mdio_board_info dap2695_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &dap2695_ar8327_data,
|
||||
},
|
||||
};
|
||||
|
||||
static struct flash_platform_data dap2695_flash_data = {
|
||||
.type = "mx25l12805d",
|
||||
};
|
||||
|
||||
static void dap2695_get_mac(const char *name, char *mac)
|
||||
{
|
||||
u8 *nvram = (u8 *) KSEG1ADDR(DAP2695_NVRAM_ADDR);
|
||||
int err;
|
||||
|
||||
err = ath79_nvram_parse_mac_addr(nvram, DAP2695_NVRAM_SIZE,
|
||||
name, mac);
|
||||
if (err)
|
||||
pr_err("no MAC address found for %s\n", name);
|
||||
}
|
||||
|
||||
static void __init dap2695_setup(void)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
u8 mac0[ETH_ALEN], mac1[ETH_ALEN], wmac0[ETH_ALEN];
|
||||
|
||||
dap2695_get_mac("lanmac=", mac0);
|
||||
dap2695_get_mac("wanmac=", mac1);
|
||||
dap2695_get_mac("wlanmac=", wmac0);
|
||||
|
||||
ath79_register_m25p80(&dap2695_flash_data);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(dap2695_leds_gpio),
|
||||
dap2695_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, DAP2695_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(dap2695_gpio_keys),
|
||||
dap2695_gpio_keys);
|
||||
|
||||
ath79_register_wmac(art + DAP2695_WMAC_CALDATA_OFFSET, wmac0);
|
||||
|
||||
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
mdiobus_register_board_info(dap2695_mdio0_info,
|
||||
ARRAY_SIZE(dap2695_mdio0_info));
|
||||
|
||||
/* GMAC0 is connected to the RGMII interface */
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac0, DAP2695_MAC0_OFFSET);
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_pll_data.pll_1000 = 0x56000000;
|
||||
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* GMAC1 is connected to the SGMII interface */
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac1, DAP2695_MAC1_OFFSET);
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth1_data.speed = SPEED_1000;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
||||
|
||||
ath79_register_eth(1);
|
||||
|
||||
ath79_register_pci();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_DAP_2695_A1, "DAP-2695-A1",
|
||||
"D-Link DAP-2695 rev. A1",
|
||||
dap2695_setup);
|
||||
@ -56,6 +56,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
|
||||
ATH79_MACH_CR3000, /* PowerCloud CR3000 */
|
||||
ATH79_MACH_CR5000, /* PowerCloud CR5000 */
|
||||
ATH79_MACH_DAP_2695_A1, /* D-Link DAP-2695 rev. A1 */
|
||||
ATH79_MACH_DB120, /* Atheros DB120 reference board */
|
||||
ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */
|
||||
ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */
|
||||
|
||||
@ -597,3 +597,32 @@ $(Device/seama)
|
||||
endef
|
||||
|
||||
TARGET_DEVICES += dir-869-a1 mynet-n600 mynet-n750 qihoo-c301
|
||||
|
||||
define Build/mkwrggimg
|
||||
$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
|
||||
-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
|
||||
-m $(BOARDNAME) -s $(DAP_SIGNATURE) \
|
||||
-v LEDE -B $(REVISION)
|
||||
mv $@.imghdr $@
|
||||
endef
|
||||
|
||||
define Build/wrgg-pad-rootfs
|
||||
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
|
||||
endef
|
||||
|
||||
define Device/dap-2695-a1
|
||||
DEVICE_TITLE := D-Link DAP-2695 rev. A1
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k uboot-envtools
|
||||
BOARDNAME = DAP-2695-A1
|
||||
IMAGES := factory.img sysupgrade.bin
|
||||
IMAGE_SIZE = 15360k
|
||||
IMAGE/factory.img = append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin = append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
||||
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
|
||||
KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
|
||||
MTDPARTS = spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
|
||||
DAP_SIGNATURE := wapac02_dkbs_dap2695
|
||||
DEVICE_VARS += DAP_SIGNATURE
|
||||
endef
|
||||
|
||||
TARGET_DEVICES += dap-2695-a1
|
||||
|
||||
Loading…
Reference in New Issue
Block a user