mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
30,125 Commits 3 Branches 0 Tags 517 MiB
07352ca2c7
Commit Graph

13416 Commits

Author SHA1 Message Date
John Crispin
07352ca2c7 ralink: fix hw status almost full not work on mt7620 and mt7621 
the old FE_INT_STATUS register becomes two registers.
FE_INT_STATUS and INT_STATUS. so the hw status almost full
must change to read from FE_INT_STATUS register.
tx/rx done read from INT_STATUS register.

mt7620 datasheet define CNT_GDM1_AF at BIT(29).
but after test it should be BIT(13). why?

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44371
 2015-02-09 19:34:49 +00:00
John Crispin
525cd8aedb ralink: change rt3883 cpu type to 74kc 
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44370
 2015-02-09 19:34:32 +00:00
John Crispin
3ebd262202 realview: r44368 contained a superflous patch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44369
 2015-02-09 19:28:34 +00:00
John Crispin
75fe1afa95 realview: bump to 3.18 
Signed-off-by: Your Name <blogic@openwrt.org>

SVN-Revision: 44368
 2015-02-09 19:24:48 +00:00
Rafał Miłecki
3dbaab6f67 bcm53xx: fix loading SPROM content by bcma init change 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44367
 2015-02-09 18:43:05 +00:00
John Crispin
ed84ceaa02 ixp4xx: add v3.18 support 
Signed-off-by: Your Name <blogic@openwrt.org>

SVN-Revision: 44363
 2015-02-09 14:24:00 +00:00
John Crispin
b523db36a0 ar71xx: dir-505: fix reset button gpio active_low value 
Fix 'active_low' default value for the reset button on DIR-505.

Signed-off-by: Rocco Folino <rocco@devzen.net>

SVN-Revision: 44360
 2015-02-09 12:17:00 +00:00
John Crispin
a5b60de253 ar71xx: Add support for MERCURY MAC1200R 
This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac
router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44359
 2015-02-09 12:16:51 +00:00
John Crispin
35d38f21e0 ar71xx: fix nbg6716 power and usb led 
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Marcin Mikolajczak <gr4ffy@gmail.com>

SVN-Revision: 44358
 2015-02-09 12:16:43 +00:00
John Crispin
ba1904056d oxnas: copy ubinized images to binary folder 
Since r43778 ubinized images are stored inside KDIR. This makes sense
when using an uninized image to generate a factory image.
On oxnas ubinized images were used for sysupgrade before proper NAND
support was implemented in OpenWrt.
For users still on old builds before sysupgrade.tar was introduced,
ubinized image is thus the only option to conveniantly upgrade to a
more recent build.
Copy ubinized image also to BIN_DIR, so it will be easier for users
to find them.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44357
 2015-02-09 12:16:04 +00:00
John Crispin
4ce7053b2b ramips: Kingston MLW221 and MLWG2 cleanup 
MLW221 dts use tabs NOT spaces.
MLWG2 dts typo and 1 tab not spaces
01_leds and diag.sh cleanup

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 44356
 2015-02-09 12:15:45 +00:00
John Crispin
2c03605028 ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi Mini 
This patch sets the correct location of the mt76 radio in the pcie bridge
(pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44355
 2015-02-09 12:15:17 +00:00
John Crispin
2dd7bce338 ramips: Add mt76 node for Lenovo Y1 and Y1S. 
Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch.
Tested on Lenovo Y1.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 44354
 2015-02-09 12:15:00 +00:00
John Crispin
1c0c1ebc6b lantiq: td-w8970: fix failsafe mode 
Fix failsafe mode for TD-W8970, register interface for preinit.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44353
 2015-02-09 12:14:48 +00:00
John Crispin
1c9dc26ce9 lantiq: td-w8970: fix reset button 
For TP-LINK TD-W8970 button should work as "reset", not "BTN_1".

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 44352
 2015-02-09 12:14:32 +00:00
John Crispin
983f902177 octeon: switch to 3.18 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44350
 2015-02-09 12:14:09 +00:00
John Crispin
654bc380ec ralink: add 3.18 support 
keep default as 3.14, mt7621 gic need to be ported to 3.18

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44349
 2015-02-09 12:13:55 +00:00
John Crispin
826b461427 lantiq: add 3.18 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44348
 2015-02-09 12:13:25 +00:00
John Crispin
682cf3b854 au1000: add 3.18 support 
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44345
 2015-02-09 12:12:39 +00:00
John Crispin
9f0f80faac ar7: add 3.18 support 
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44344
 2015-02-09 12:12:30 +00:00
John Crispin
6fd1e60748 malta: drop 3.10 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44342
 2015-02-09 12:11:34 +00:00
John Crispin
7af8f152dd malta: disable 64 builds as the userland has been broken for ages 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44341
 2015-02-09 12:11:28 +00:00
John Crispin
650a71bcf8 malta: add 3.18 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44340
 2015-02-09 12:11:19 +00:00
John Crispin
7155ec7191 kernel: copy mips_decompressor_memmove patch to 3.18/3.19 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44339
 2015-02-09 12:10:46 +00:00
John Crispin
f17dee3058 kernel: add missing symbols 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44338
 2015-02-09 12:10:18 +00:00
John Crispin
28353b3fc5 kernel: fix compile error inside adm6996.c 
drivers/net/phy/adm6996.c:881:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' [-Wformat=]

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44333
 2015-02-09 12:09:17 +00:00
Jo-Philipp Wich
49fda5e4d9 sdk: use prepare target to initialize git snapshot 
The new approach is less prone to race conditions and will properly
snapshot the symlinks prepared by the prereq-build target.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44330
 2015-02-08 22:54:27 +00:00
Luka Perkov
4b0fbf3072 ramips: fix patches after 3.14.32 bump 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44324
 2015-02-08 15:42:42 +00:00
Nicolas Thill
6b8f598ca6 linux/generic: add missing config symbols 
Related to debug/tracing, only added to 3.14+, might be needed for older versions as well

Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 44323
 2015-02-08 15:34:20 +00:00
Nicolas Thill
ad6f7dffa5 linux/sunxi: rename A20-OLinuXino-Lime profile 
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 44322
 2015-02-08 15:34:13 +00:00
Luka Perkov
f6a01dd3d1 x86: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44321
 2015-02-08 15:31:25 +00:00
Luka Perkov
683da1384b lantiq: fix patches after 3.14.32 bump 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44320
 2015-02-08 15:09:45 +00:00
Luka Perkov
7294b892dc kirkwood: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44319
 2015-02-08 12:01:39 +00:00
Luka Perkov
b9d513158e kernel: update 3.18 to 3.18.6 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44318
 2015-02-08 12:01:37 +00:00
Jo-Philipp Wich
e972c95cf0 x86: declare missing kernel symbols 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44316
 2015-02-07 21:26:20 +00:00
Luka Perkov
efc28a75fe ar71xx: ubnt: move new board patches into one 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44315
 2015-02-07 21:11:06 +00:00
Luka Perkov
0067ab8e39 ar71xx: rb2011: apply patch to file 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44314
 2015-02-07 21:10:51 +00:00
Jo-Philipp Wich
65ec08d1b0 imagebuilder: align filename with SDK 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44313
 2015-02-07 21:01:48 +00:00
Jo-Philipp Wich
f52a62d600 sdk: rename file to mention target/subtarget and move host system to suffix 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44312
 2015-02-07 21:01:43 +00:00
Jo-Philipp Wich
e9c10a0c8e toolchain: respect CONFIG_VERSION_FILENAMES and add host system suffix 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44311
 2015-02-07 21:01:37 +00:00
Luka Perkov
fcfbbfc385 ar71xx: merge board specific patches into one 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44309
 2015-02-07 20:53:16 +00:00
Luka Perkov
54ac4e0600 ar71xx: uci-defaults: add el-mini to appropriate group 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44307
 2015-02-07 19:59:05 +00:00
Luka Perkov
8ca6c1acd4 ar71xx: qihoo: define flash variable as static 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44306
 2015-02-07 19:59:02 +00:00
Luka Perkov
81db848656 targets: base-files: diag.sh does not need to be executable 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
 2015-02-07 19:58:58 +00:00
Luka Perkov
92e6e80080 targets: files in uci-defaults do not need to be executables 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
 2015-02-07 19:58:52 +00:00
Luka Perkov
0bbcdb21da ar71xx: refresh patches 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44303
 2015-02-07 17:48:39 +00:00
Luka Perkov
d81a8ad523 kernel: update 3.14 to 3.14.32 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44302
 2015-02-07 17:48:33 +00:00
Jo-Philipp Wich
188032c8e3 imagebuilder: don't pregenerate package index, strip host binaries 
The package index is generated on first use anyway, therefore it makes no
sense to continue shipping it.

Also sstrip the bundled host binaries when packing the IB to save some
additional space.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44293
 2015-02-06 12:31:31 +00:00
Imre Kaloz
865647cea2 mvebu: add note about the move to single firmware files 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44291
 2015-02-06 11:18:59 +00:00
Imre Kaloz
eda08dd423 mvebu: support building images for a single board 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44290
 2015-02-06 11:16:20 +00:00