Florian Fainelli
|
8a8943671a
|
fixes for the bcm6338 clocks, thanks Maxime
SVN-Revision: 16640
|
2009-07-01 13:49:20 +00:00 |
|
Florian Fainelli
|
5a7c5b2d36
|
a couple of more fixes to get 6345 booting up to the console handover
SVN-Revision: 16636
|
2009-06-30 13:45:49 +00:00 |
|
Florian Fainelli
|
8179904540
|
shared DMA zone is twice smaller on 6338
SVN-Revision: 16608
|
2009-06-28 20:06:44 +00:00 |
|
Florian Fainelli
|
e6d307ab4b
|
turn on size optimization for bcm63xx
SVN-Revision: 16607
|
2009-06-28 20:06:13 +00:00 |
|
Florian Fainelli
|
4096da301d
|
off-by-one gpio numbers for bcm6338
SVN-Revision: 16597
|
2009-06-28 04:23:11 +00:00 |
|
Florian Fainelli
|
8813961e86
|
bcm6338 can support PCI since it has MPI
SVN-Revision: 16592
|
2009-06-27 21:43:55 +00:00 |
|
Florian Fainelli
|
ca5de76ed3
|
more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly
SVN-Revision: 16589
|
2009-06-27 20:32:43 +00:00 |
|
Florian Fainelli
|
d02d75ba02
|
fix the flash address comment and register the flash device again with its proper physical address on 6338/6345
SVN-Revision: 16587
|
2009-06-27 18:58:00 +00:00 |
|
Florian Fainelli
|
0bb3a46217
|
fix a stupid typo preventing the board from being detected
SVN-Revision: 16586
|
2009-06-27 18:30:45 +00:00 |
|
Florian Fainelli
|
bcc1dd7f99
|
prevent bcm6338 and bcm6345 from crashing very early
SVN-Revision: 16585
|
2009-06-27 18:23:58 +00:00 |
|
Florian Fainelli
|
7da8855c79
|
only register fallback sprom and enable PCI if we actually have support for PCI
SVN-Revision: 16581
|
2009-06-27 16:17:18 +00:00 |
|
Florian Fainelli
|
bf0942ce5c
|
do not bloat the kernel with experimental bcm6345 for now
SVN-Revision: 16580
|
2009-06-27 15:52:03 +00:00 |
|
Florian Fainelli
|
13a8ed9ca0
|
more missing register definitions for bcm6338
SVN-Revision: 16579
|
2009-06-27 15:51:27 +00:00 |
|
Florian Fainelli
|
287a2c0ba9
|
more bcm6338 and bcm6345 related fixes
SVN-Revision: 16568
|
2009-06-26 12:34:35 +00:00 |
|
Florian Fainelli
|
8c4137900c
|
define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338
SVN-Revision: 16567
|
2009-06-26 11:08:12 +00:00 |
|
Florian Fainelli
|
45c25ff988
|
generate images for the bcm6338w
SVN-Revision: 16566
|
2009-06-26 10:27:37 +00:00 |
|
Florian Fainelli
|
e86e91380a
|
add board definitions for the bcm6338w
SVN-Revision: 16565
|
2009-06-26 10:27:13 +00:00 |
|
Florian Fainelli
|
1795111337
|
add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364)
SVN-Revision: 16506
|
2009-06-18 15:00:32 +00:00 |
|
Florian Fainelli
|
606193fc1f
|
generate experimental images for bcm6338 boards, thanks to Daniel Dickinson
SVN-Revision: 16490
|
2009-06-17 13:16:59 +00:00 |
|
Florian Fainelli
|
a68fe5655e
|
use 2.6.27.5
SVN-Revision: 16486
|
2009-06-17 08:46:47 +00:00 |
|
Imre Kaloz
|
c83b031b84
|
use the same i/o schedulers for all targets
SVN-Revision: 16479
|
2009-06-15 20:43:02 +00:00 |
|
Florian Fainelli
|
cc12508ee3
|
use build system REVISION variable (#5317)
SVN-Revision: 16400
|
2009-06-10 13:43:48 +00:00 |
|
Florian Fainelli
|
ca16accfbb
|
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset.
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>
SVN-Revision: 16396
|
2009-06-10 08:24:13 +00:00 |
|
Florian Fainelli
|
e9c22f7939
|
cleanup the watchdog driver a bit
SVN-Revision: 16395
|
2009-06-09 21:35:51 +00:00 |
|
Florian Fainelli
|
972619416e
|
fix the watchdog driver and enable it by default
SVN-Revision: 16394
|
2009-06-09 21:28:15 +00:00 |
|
Florian Fainelli
|
01118457e8
|
rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987).
SVN-Revision: 16393
|
2009-06-09 08:04:52 +00:00 |
|
Florian Fainelli
|
4f72fef05e
|
remove this line which got accidentaly succesfully applied, but should not have (#5285)
SVN-Revision: 16380
|
2009-06-08 13:42:11 +00:00 |
|
Florian Fainelli
|
8f84508c25
|
fix ethernet driver removal
SVN-Revision: 16335
|
2009-06-04 10:04:53 +00:00 |
|
Florian Fainelli
|
50936e1aa5
|
fix pcmcia device removal
SVN-Revision: 16334
|
2009-06-04 10:04:11 +00:00 |
|
Florian Fainelli
|
116a53a154
|
add missing null entry in pcmcia driver
SVN-Revision: 16333
|
2009-06-04 10:03:41 +00:00 |
|
Florian Fainelli
|
4049592268
|
request gpio pins and set direction correctly for pcmcia
SVN-Revision: 16332
|
2009-06-04 10:03:03 +00:00 |
|
Florian Fainelli
|
287a0efd68
|
be SMP safe even with gpiolib
SVN-Revision: 16331
|
2009-06-04 10:02:23 +00:00 |
|
Florian Fainelli
|
9013e936ed
|
cache gpio values in gpio_set
SVN-Revision: 16330
|
2009-06-04 10:01:55 +00:00 |
|
Florian Fainelli
|
1208ffaedb
|
use the correct number of GPIOs for bcm6358
SVN-Revision: 16329
|
2009-06-04 10:01:03 +00:00 |
|
Florian Fainelli
|
c95420f06d
|
register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
SVN-Revision: 16328
|
2009-06-04 09:59:28 +00:00 |
|
Florian Fainelli
|
d2b2ce325a
|
merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU.
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.
SVN-Revision: 16302
|
2009-06-03 08:55:18 +00:00 |
|
Florian Fainelli
|
05b40c8d13
|
backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time
SVN-Revision: 16277
|
2009-06-01 18:27:51 +00:00 |
|
Florian Fainelli
|
9be0df0caa
|
include wpa-supplicant iw in the default profile
SVN-Revision: 16195
|
2009-05-29 15:33:14 +00:00 |
|
Florian Fainelli
|
027d6ac4c5
|
also include the SPI driver in the gw6x00 profile
SVN-Revision: 16077
|
2009-05-26 11:15:27 +00:00 |
|
Florian Fainelli
|
a94930dbbb
|
include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking
SVN-Revision: 16075
|
2009-05-26 10:25:55 +00:00 |
|
Florian Fainelli
|
fa45acd690
|
add the Tecom GW6x00 (6000 and 6200) board profile
SVN-Revision: 16059
|
2009-05-25 16:14:13 +00:00 |
|
Florian Fainelli
|
f150bc5e36
|
update to new stable 2.6.27.24
SVN-Revision: 15931
|
2009-05-20 09:00:09 +00:00 |
|
Florian Fainelli
|
1322e2721a
|
disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211
SVN-Revision: 15926
|
2009-05-19 18:15:19 +00:00 |
|
Imre Kaloz
|
e965c02820
|
even more config file cleanup
SVN-Revision: 15913
|
2009-05-18 13:21:25 +00:00 |
|
Florian Fainelli
|
ce87c61ae9
|
add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later
SVN-Revision: 15911
|
2009-05-18 11:11:23 +00:00 |
|
Florian Fainelli
|
0d7f5f8d2c
|
add support for sysupgrade (#5117)
SVN-Revision: 15900
|
2009-05-17 16:53:57 +00:00 |
|
Imre Kaloz
|
91e866f383
|
config cleanups
SVN-Revision: 15861
|
2009-05-15 10:40:04 +00:00 |
|
Imre Kaloz
|
26b42d5807
|
cardbus != pcmcia -- disable it in b43
SVN-Revision: 15857
|
2009-05-15 08:58:02 +00:00 |
|
Florian Fainelli
|
480b27e9f9
|
add missing configuration symbol
SVN-Revision: 15856
|
2009-05-15 07:04:32 +00:00 |
|
Imre Kaloz
|
6bfddb152f
|
some additional config file cleanup..
SVN-Revision: 15845
|
2009-05-14 13:32:34 +00:00 |
|