mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
29,249 Commits 3 Branches 0 Tags 517 MiB
1846efcaaf
Commit Graph

12906 Commits

Author SHA1 Message Date
Felix Fietkau
0178b516a2 ar8216: simplify PHY fixup/init 
Move the PHY fixup call to the PHY init loop.
Use ar8xxx_has_gige in the PHY init instead of passing the gigE
capability via function parameter.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43333
 2014-11-20 15:19:04 +00:00
Felix Fietkau
43e3e88379 ar8216: use genphy_config_aneg also for PHY 0 
Kernel 3.14 introduced a switch reset in phy_init_hw in drivers/net/phy
causing BMCR_ANENABLE to get cleared.

Due to the fact that ar8xxx_phy_config_aneg does nothing for
PHY 0 autonegatiation support remains disabled.
This can cause ports to operate at 10MBit/half-duplex only.

Fix this by calling genphy_config_aneg for PHY 0 too as
genphy_config_aneg sets BMCR_ANENABLE if it's not yet set.
Fixes: ticket 17800

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43332
 2014-11-19 20:18:01 +00:00
Felix Fietkau
898712f43f ar8216: factor out PHY init code into a generic function 
PHY init code in the switch-specific hw_init functions is mainly
identical. Factor it out into a generic ar8xxx_phy_init function.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43331
 2014-11-19 20:17:52 +00:00
Felix Fietkau
20baeb5595 ar8216: introduce fixup_phys callback in ar8xxx_chip 
Move phy fixup code from the chip-specific hw_init functions into a
fixup_phys callback.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43330
 2014-11-19 20:17:43 +00:00
Felix Fietkau
37fefea79b ar8216: after a switch reset poll until BCMR_RESET is cleared 
Currently there is a fixed 1000ms wait time after the switch was reset.
Most if not all switches need much less time to perform a reset.
Therefore replace the fixed wait time with polling for BMCR_RESET to
be cleared.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43329
 2014-11-19 20:17:37 +00:00
Felix Fietkau
6dcdc2bb05 ar8216: introduce global constant for number of PHYs 
All supported switches have 5 PHYs. Currently partially 5 is hardcoded
and partially switch-specific constants exist.
Replace them with a global constant.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43328
 2014-11-19 20:17:30 +00:00
Rafał Miłecki
ac7e0e69bb brcm47xx: mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43322
 2014-11-19 17:35:24 +00:00
John Crispin
83381c5c8f ixp4xx: Don't overwrite memory in wg302v1_fixup() 
wg302v1_fixup() looks for the ATAG_CMDLINE atag, it doesn't find it and
so it takes the last atag in the list and overwrites non allocated
memory.

The side effects are corrupted vital data and a kernel that doesn't
boot. More details here https://dev.openwrt.org/ticket/18356

The fix appends the fixup to the command line and updates the atag only
when it finds it.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>

SVN-Revision: 43320
 2014-11-19 14:09:19 +00:00
John Crispin
da5001475c gemini: add basic nas4220 board support 
Few notes:
- redboot partitions are unusable
- redboot declares only 16M of RAM, hence the mem arg in cmdline and separate kernel config
- boots fine but only ethernet works for now
- split wiliboard and raidsonic boards into different subtargets

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43319
 2014-11-19 14:09:10 +00:00
John Crispin
bd164f233c mpc85xx: add 3.14 kernel support for mpc85xx platform 
This patch adds 3.14 kernel support for the mpc85xx platform.
Works fine here with a TL-WDR4900 which seems to be the only
supported device using this platform.
There might be differences depending on HW version, therefore
I'd ask others to test too.

Changes to 3.10
  missing config options added to 3.14 config file
  patch 001: rebased
  patch 100: rebased
  patch 110: rebased
  patch 120: rebased
  patch 130: rebased
  patch 140: minor adjustment
  patch 200: removed, change went upstream
  patch 210: rebased
  patch 220: removed, change went upstream
  patch 750: new, fixes an issue with ethernet port autoneg being
             disabled due to changes in kernel phy handling

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43308
 2014-11-19 09:20:55 +00:00
John Crispin
f210f3811a ar71xx: Added support for D-link DHP-1565 rev. A1 
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>

SVN-Revision: 43307
 2014-11-19 09:20:47 +00:00
John Crispin
6af2109a64 ar71xx: fix switch configuration in Ubiquiti UAP Pro 
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43306
 2014-11-19 09:20:18 +00:00
John Crispin
d93dc245e5 ralink: various fixes to the wm8960 setup code 
still no sound but the codec is properly detected now, powers up and i can hear
noise on the speakers.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43305
 2014-11-19 09:20:12 +00:00
John Crispin
989bfd815b ralink: make the dmaengine driver compile under 3.14 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43304
 2014-11-19 09:20:02 +00:00
John Crispin
e1f6d0dd0a ralink: fix tx vlan offload and hardware status 
hardware status and tx vlan offload support on all targets
except rt5350. so i modify the IS_ENABLE condition only for
mt7621.
support mt7621 hardware status reference by SDK. but i don't
have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE
to 0 to let software count.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43303
 2014-11-19 09:19:57 +00:00
John Crispin
a5f562993e ralink: support netconsole 
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43302
 2014-11-19 09:19:49 +00:00
John Crispin
9c5dfd9546 ralink: improve tx vlan offload 
hardware tx vlan offload only support max 16 vids
now use add/delete vlan interface to update vlan id table
when duplicate vlan id index detect.
disable hardware tx vlan offload support.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43301
 2014-11-19 09:19:43 +00:00
John Crispin
510ff1f1b8 ralink: merge the mt7620a/n subtargets 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43300
 2014-11-19 09:19:38 +00:00
John Crispin
752745a85a ralink: set ralink_soc on mt7621 
sdhci failed to init because of this

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43293
 2014-11-17 21:58:30 +00:00
John Crispin
32d4348540 ralink: fix pcie reset 
some old mt7620a uboots dont reset the pcie core properly. work around this
issue in the kernel driver.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43292
 2014-11-17 16:27:48 +00:00
John Crispin
5d2c810101 kernel: add the ubifs EOF marker support to 3.14 kernel 
Without this patch the UBIFS driver is unable to attach to the mtd
storage and mount the root FS.

Fixes a kernel panic with Netgear WNDR4300/3700v4 devices.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>

SVN-Revision: 43287
 2014-11-17 08:34:03 +00:00
Felix Fietkau
28b26fa603 ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166D 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43283
 2014-11-16 12:26:53 +00:00
Felix Fietkau
b3f2d3d01b ramips: use mediatek,mtd-eeprom instead of ralink for mt76 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43282
 2014-11-16 12:26:47 +00:00
Felix Fietkau
02c319c27a ramips: fix default config breakage on whr-1166d 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43281
 2014-11-16 11:39:19 +00:00
John Crispin
c073bf6bdf ralink: few updates tot he sdhci probe code 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43275
 2014-11-15 14:35:32 +00:00
John Crispin
ce1c580efb ralink: make the sdhci module build again 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43274
 2014-11-14 18:51:41 +00:00
John Crispin
76a54a424c ar8216: fix "unused variable" compiler warning 
Most likely a copy & paste error when deriving ar8327_sw_set_ports
from ar8xxx_sw_set_ports.
Remove unused variable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43273
 2014-11-14 17:06:09 +00:00
John Crispin
44d703160b lantiq: Concatenate multiple flash chips for lantiq-flash 
Signed-off-by: Maikel Bloemendal <openwrt@maikelenyvonne.nl>
Tested-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43272
 2014-11-14 17:06:04 +00:00
John Crispin
6fafcba63b ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 
Sets the system LED on the EasyLink M150 and mini to lower-case "easylink"

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43271
 2014-11-14 16:58:29 +00:00
John Crispin
b6f5713b3f ar71xx: adjust MR900 profile for the OpenMesh MR900v2 board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43270
 2014-11-14 16:55:32 +00:00
John Crispin
52c267e2f7 ar71xx: add sysupgrade support for OpenMesh MR900v2 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43267
 2014-11-14 16:55:14 +00:00
John Crispin
104be9f803 ar71xx: add user-space support for OpenMesh MR900v2 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43266
 2014-11-14 16:55:04 +00:00
John Crispin
bc333d5399 ar71xx: add kernel support for the OpenMesh MR900v2 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43265
 2014-11-14 16:54:58 +00:00
John Crispin
305c1431e3 ar71xx: create profile and build image for the OpenMesh MR900 board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43264
 2014-11-14 16:54:50 +00:00
John Crispin
548822cd7a ar71xx: enable sysupgrade for the OpenMesh MR900 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43261
 2014-11-14 16:54:28 +00:00
John Crispin
cfdaa8aefd ar71xx: add user-space support for the OpenMesh MR900 board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43259
 2014-11-14 16:54:15 +00:00
John Crispin
95544f33dd ar71xx: add kernel support for the OpenMesh MR900 board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43258
 2014-11-14 16:54:07 +00:00
John Crispin
4b5c23e1e3 lantiq: vgv7519 - set some defaults for leds 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43256
 2014-11-14 16:53:53 +00:00
John Crispin
901dddce31 lantiq: set default led configuration from /sys entry later, after per board settings 
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43255
 2014-11-14 16:53:48 +00:00
John Crispin
7cc72e4b93 ralink: dont define pm_poweroff 
this makes gpio-poweroff work

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43254
 2014-11-14 16:53:40 +00:00
John Crispin
be23eaa8c3 ralink: fix bank detection in mt7621 gpio driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43253
 2014-11-14 16:53:34 +00:00
John Crispin
6d4282086d ralink: enable the proper drivers in the mt7621 config 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43252
 2014-11-14 16:53:29 +00:00
John Crispin
0767ee848a ralink: fix broken pinmux function naming inside mt7621.c 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43251
 2014-11-14 16:53:21 +00:00
John Crispin
8cde8a05c9 ralink: update sdhci driver 
the new driver handles newer SoCs

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43250
 2014-11-14 16:53:15 +00:00
John Crispin
66463a5b5d ralink: update pcie driver to load ranges from dts 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43249
 2014-11-14 16:53:07 +00:00
John Crispin
7963782b86 ralink: add a new global ralink_soc variable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43248
 2014-11-14 16:53:01 +00:00
John Crispin
caa29dea2c ralink: update ethernet driver to use new ralink_soc variable 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43247
 2014-11-14 16:52:52 +00:00
John Crispin
bf8bb5b611 ralink: fix the 10mbit bug on mt7621 
a missing "val =" caused the AN bit in the phy0 reg to be flushed.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43246
 2014-11-14 16:52:47 +00:00
John Crispin
194ca6127e ralink: improve mt7530 support 
the SDK does a bit of extra init that we did not do yet when using an external mt7530.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43245
 2014-11-14 16:52:42 +00:00
John Crispin
0371dabc13 ralink: add support for WSR-600/1166 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43244
 2014-11-14 16:52:36 +00:00
John Crispin
062828aee0 ralink: mt7621 has a different base addr for PVID 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43243
 2014-11-14 16:52:30 +00:00
John Crispin
938e1e03fb ralink: drop some unused code from pci-mt7620a 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43242
 2014-11-14 16:52:25 +00:00
John Crispin
bfcdc8711c ralink: fix up dts for mt7621 eval board 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43238
 2014-11-12 14:55:00 +00:00
John Crispin
86e3315ece ralink: add support for mt7621 ethernet 
somehow all switch ports still come up as 10mbit.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43237
 2014-11-12 14:54:50 +00:00
John Crispin
45814d150a ralink: more mt7530 fixes 
make 1166 wan port work. this broke due to the esw_polling bug

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43236
 2014-11-11 11:46:16 +00:00
John Crispin
e399931376 ralink: fix mdio polling of external phys if only 1 phy exists 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43235
 2014-11-11 11:46:09 +00:00
John Crispin
6623feb572 ralink: remove IC plus phy driver 
this driver confuses some boards

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43234
 2014-11-11 11:46:02 +00:00
Luka Perkov
da53ac677f ralink: DCS-930: enable sound 
Camera has microphone; in order to use it by default enable sound support.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43232
 2014-11-11 00:08:05 +00:00
Luka Perkov
494c6e7f6e ralink: update DCS-930 dts 
* read MAC address from factory partition
* remove port defines since there is only one port (most likely C/P error)

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43231
 2014-11-11 00:05:14 +00:00
Luka Perkov
4f1a9470f0 kirkwood: add support for Linksys EA3500 
http://wiki.openwrt.org/toh/linksys/ea3500

Signed-off-by: Dan Walters <dan@walters.io>

SVN-Revision: 43230
 2014-11-10 23:55:10 +00:00
Hauke Mehrtens
a69ebe234d kernel: update kernel 3.18 to rc4 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43229
 2014-11-10 22:51:30 +00:00
Rafał Miłecki
93b3924128 kernel: backport bcm47xxpart changes queued for 3.19 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43223
 2014-11-08 21:41:21 +00:00
Rafał Miłecki
fcc8fe9bd2 kernel: ssb: add PCI ID 0x4351 
Backports commit 9837baa99717c7526e4bae9c68e8728dea4af183

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43221
 2014-11-08 20:51:24 +00:00
Felix Fietkau
9e98d559f6 ramips: fix initramfs image build handling 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43219
 2014-11-08 15:40:17 +00:00
Felix Fietkau
455ba77b6a ramips: add eeprom data for 802.11ac wlan on WHR-1166D 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43218
 2014-11-08 14:15:49 +00:00
Felix Fietkau
29f71d384f ramips: add missing size/address-cells to device tree include files 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43217
 2014-11-08 14:15:44 +00:00
John Crispin
604a3e5134 ralink: fix a regression that broke pcie on mt7621 
i accidentally dropped 2 lines while adding mt7628 support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43216
 2014-11-08 13:45:26 +00:00
Felix Fietkau
07754ac297 ramips: enable sysupgrade for whr-600d, whr-1166d 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43213
 2014-11-08 12:18:58 +00:00
John Crispin
503a34ca50 ralink: fix the compat string for mt7620a pci 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43211
 2014-11-08 12:12:05 +00:00
John Crispin
89f74722b7 ralink: assign default ranges inside the pci driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43207
 2014-11-07 10:51:08 +00:00
John Crispin
9007e2244f ralink: mt7628 does not actually need this fix for the ethernet driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43206
 2014-11-07 10:51:00 +00:00
John Crispin
c32ad22e40 ralink: improve r43200 
r43200 tries to detect if the fixup is needed or not. control the behaviour via
OF instead and disable unused ports.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43201
 2014-11-06 12:19:53 +00:00
John Crispin
0cc0ba2b3a ralink: only apply ephy1 fixup if the phy is present 
this broke e1700 lan2 as the fixup was applied to the phy inside the mt7530.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43200
 2014-11-06 11:11:44 +00:00
John Crispin
78b6222851 ralink: tweak e1700 dts file 
the current driver code wont know which mt7530 to apply the llllw setting to.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43199
 2014-11-06 09:31:45 +00:00
John Crispin
c5954fc510 ralink: make pci driver handle mt7628 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43198
 2014-11-06 09:31:37 +00:00
John Crispin
cadf517107 ralink: add support for mt7628 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43197
 2014-11-06 09:31:31 +00:00
John Crispin
f8404aaf9e ralink: add mt7628 support to the ethernet driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43196
 2014-11-06 09:31:19 +00:00
John Crispin
26504289df ralink: cleanup ethernet Makefile/Kconfig 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43195
 2014-11-06 09:31:09 +00:00
John Crispin
d524fe46fd ralink: move ethernet driver to files/ 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43194
 2014-11-06 09:31:03 +00:00
Nicolas Thill
61a708154d sunxi: fix network config on A20-OLinuXino-LIME 
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43190
 2014-11-06 02:23:12 +00:00
Nicolas Thill
ddb98cb70f sunxi: add support for Olimex A20-OLinuXino-LIME 
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43189
 2014-11-06 00:05:23 +00:00
Imre Kaloz
d738d22bf8 add support for the Linksys E1700 
SVN-Revision: 43186
 2014-11-05 14:37:13 +00:00
Steven Barth
d82cf547d0 uml: remove inittab since procd is fixed now 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43185
 2014-11-05 14:21:51 +00:00
Zoltan Herpai
135c8f4b1a sunxi: move cubietruck dts into patches [3.14] 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43183
 2014-11-04 23:14:11 +00:00
Zoltan Herpai
1ac401f431 sunxi: move IR patch for bananapi 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43182
 2014-11-04 21:06:04 +00:00
Zoltan Herpai
5cd9a39573 sunxi: move bananapi dts into patches [3.14] 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43181
 2014-11-04 20:33:56 +00:00
Zoltan Herpai
6965eb4600 sunxi: move pcduino3 dts into patches [3.14] 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43180
 2014-11-04 20:20:38 +00:00
Steven Barth
384e8c09e3 uml: fix inittab 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43177
 2014-11-04 16:03:46 +00:00
Felix Fietkau
8acf9adf28 ar71xx: add missing WZR-450HP2 patch from r43026 for 3.10 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43175
 2014-11-03 22:55:01 +00:00
John Crispin
2c72ffc154 ar71xx: add support for Netgear WNR2000v4 
Signed-off-by: Michaël Burtin <mburtin@gmail.com>

SVN-Revision: 43173
 2014-11-03 20:20:56 +00:00
John Crispin
b25b58a96a ralink: add pci bidge node to mt7620a dts file 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43172
 2014-11-03 20:20:46 +00:00
John Crispin
cc142739f2 ralink: fix wan port on whr-1166 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43171
 2014-11-03 20:20:40 +00:00
John Crispin
cc5194cf03 ramips: add support for Airlink101 AR670W 
This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader
is a hacked u-Boot that reads an LZMA image directly, so we skip
generating the uImage header and enable the lzma mtdsplit parser.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43153
 2014-11-03 08:00:13 +00:00
Felix Fietkau
101289156b kernel: add missing config symbol for 3.13+ 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43152
 2014-11-02 20:06:41 +00:00
Zoltan Herpai
7aa2950165 kernel: 3.18: fix config typo 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43150
 2014-11-02 10:12:46 +00:00
Zoltan Herpai
7f707a5216 sunxi: update devtree name in network setup for pcduino3 as preparing for 3.18 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43149
 2014-11-02 10:11:36 +00:00
Hauke Mehrtens
adbb5ad195 bcm53xx: bcma: get IRQs also from device tree 
Add patches for getting the IRQ number for a device of the bcma bus
that were send for upstream inclusion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43148
 2014-11-01 15:57:30 +00:00
Hauke Mehrtens
6e6dffbe81 bcm53xx: set customized AUXCTL 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43146
 2014-11-01 13:58:18 +00:00
Hauke Mehrtens
5e13e40591 bcm53xx: activate early printk 
This makes it possible to activate early printk.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43145
 2014-11-01 13:57:50 +00:00
Hauke Mehrtens
8e20cceeae bcm53xx: refresh patches 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43144
 2014-11-01 13:55:02 +00:00