mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
29,560 Commits 3 Branches 0 Tags 517 MiB
39743e45f8
Commit Graph

13111 Commits

Author SHA1 Message Date
Luka Perkov
39743e45f8 kikwood: populate kirkwood.sh with new boards 
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43751
 2014-12-18 18:38:43 +00:00
Luka Perkov
ec9a0f898a kirkwood: set default EA4500 switch config 
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43750
 2014-12-18 18:38:38 +00:00
Hauke Mehrtens
abca0462d3 kernel: bgmac: fix some problems 
There are some problems in the napi usage that are fixed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43749
 2014-12-18 16:25:22 +00:00
Hauke Mehrtens
192e945479 bcm53xx: PCIe: add link check again 
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
 2014-12-18 16:23:42 +00:00
Felix Fietkau
4ccf215a3e ar7: remove leftover 3.10 patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43746
 2014-12-18 11:57:42 +00:00
Felix Fietkau
4571fc780d ar71xx: add support for qca956x soc 
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.

tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43744
 2014-12-18 11:28:53 +00:00
Felix Fietkau
2f9b042d69 ar8216: Inline function ar8xxx_create_mii 
Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43743
 2014-12-18 11:28:47 +00:00
Felix Fietkau
2289c7a010 ar8216: Remove read/write/rmw member functions from ar8xxx_priv 
Remove read/write/rmw member functions from ar8xxx_priv

There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43742
 2014-12-18 11:28:39 +00:00
Felix Fietkau
45a494b808 ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops 
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43741
 2014-12-18 11:28:34 +00:00
Felix Fietkau
0e7f844c66 ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch 
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43740
 2014-12-18 11:28:28 +00:00
Felix Fietkau
054767cebc ar8216: remove unused function parameter in ar8327_led_register 
Remove unused function parameter in ar8327_led_register.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43739
 2014-12-18 11:28:20 +00:00
Rafał Miłecki
e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
 2014-12-17 14:53:25 +00:00
Felix Fietkau
d27c682def kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43736
 2014-12-17 12:27:14 +00:00
Luka Perkov
309e74b86d kirkwood: add sheevaplug and derivatives 
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2

Signed-off-by: Gérald Kerma <drEagle@doukki.net>

SVN-Revision: 43735
 2014-12-17 08:33:55 +00:00
Imre Kaloz
211cac98d5 Belkin AC 1750 DB (F9K1115v2) support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734
 2014-12-17 08:27:38 +00:00
John Crispin
0ffb7323d0 ralink: remove partitoon map from mt7621.dtsi 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43720
 2014-12-15 15:55:37 +00:00
Rafał Miłecki
dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
 2014-12-15 15:43:46 +00:00
Rafał Miłecki
c3e9796cd5 brcm47xx: extract magics from specific upgrade images (and still reject them) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43718
 2014-12-15 11:09:14 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument 
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
 2014-12-15 10:37:00 +00:00
Rafał Miłecki
a5b6b7e419 brcm47xx: detect (and still reject for now) CyberTAN fw format 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43714
 2014-12-15 09:59:44 +00:00
Rafał Miłecki
fbea00b031 ramips: update mtd patches to apply after changes from r43700 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43709
 2014-12-15 09:10:43 +00:00
Rafał Miłecki
b5b4bdc066 brcm47xx: use separated function in upgrade to detect file type 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43708
 2014-12-15 08:51:14 +00:00
John Crispin
2db6da5532 kirkwood: enable EA4500 switch on 3.18 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43704
 2014-12-14 08:57:58 +00:00
John Crispin
374ab9decc gemini: update usb driver and merge registers into one patch 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43703
 2014-12-14 08:57:52 +00:00
John Crispin
fef7b4241f gemini: merge register ethernet patches into one 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43702
 2014-12-14 08:57:43 +00:00
John Crispin
6f2b7567b8 ralink: drop old pinmux nodes from dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43701
 2014-12-14 08:57:16 +00:00
Rafał Miłecki
b1bfed548c kernel: warn users to use the new (dedicated) firmware splitter 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43700
 2014-12-14 00:35:03 +00:00
Rafał Miłecki
2b4fbeb6d4 kernel: move old firmware uimage splitter into separated patch 
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43696
 2014-12-13 20:06:47 +00:00
Felix Fietkau
e984869e22 realview: drop old kernel configs 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43692
 2014-12-13 11:55:59 +00:00
Felix Fietkau
cfe3280494 au1000: remove leftover 3.3 kernel config 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43691
 2014-12-13 11:55:49 +00:00
Felix Fietkau
511fadd857 au1000: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43690
 2014-12-13 11:55:41 +00:00
Felix Fietkau
0f25db1a7d rb532: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43689
 2014-12-13 11:55:32 +00:00
Felix Fietkau
d34e2a337c at91: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43688
 2014-12-13 11:55:24 +00:00
Felix Fietkau
45380ebd1a brcm2708: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43687
 2014-12-13 11:55:11 +00:00
Felix Fietkau
170ce29617 ixp4xx: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43686
 2014-12-13 11:55:04 +00:00
Felix Fietkau
c7e8b5ebbd lantiq: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43685
 2014-12-13 11:54:57 +00:00
Felix Fietkau
daeec86fba mpc85xx: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43684
 2014-12-13 11:54:49 +00:00
Florian Fainelli
8692819c2c netlogic: fix XLR network driver build 
Backport an upstream submission to fix xlr_net

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43682
 2014-12-13 08:08:30 +00:00
John Crispin
263070a2e7 ramips:Add support for Aigale Ai-BR100 
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 43681
 2014-12-13 08:07:03 +00:00
John Crispin
aa697f1313 mxs: indention and whitespace fixes 
Align this file with the style of most other modules.mk.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43680
 2014-12-13 08:06:22 +00:00
John Crispin
a28d07abbe ar71xx: add an extra check on board_name for ath10k firmware patchs 
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679
 2014-12-13 08:06:01 +00:00
John Crispin
10dbdb28d7 oxnas: fix gpio-fan on kd20 
define speed-map and include kmod-hwmon-gpiofan in kd20 profile

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43678
 2014-12-13 08:04:54 +00:00
John Crispin
9013a144fd oxnas: also make use of the GPIO poweroff driver 
Works great to power-off the kd20 ;)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43677
 2014-12-13 08:02:52 +00:00
John Crispin
4a7c88f139 kernel/generic: remove some left-over garbage from ledtrig patch 
cosmetics. clean a style issue introduced by r43674.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43676
 2014-12-13 08:00:22 +00:00
John Crispin
118534ea39 oxnas: use libata ledtrig support for kd20 hdd leds 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43675
 2014-12-12 20:24:33 +00:00
John Crispin
ee6b5c6007 kernel/generic: add ledtrig support to libata 
SVN-Revision: 43674
 2014-12-12 20:24:21 +00:00
John Crispin
1701a9a4b9 oxnas: clean up default package selection 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43673
 2014-12-12 20:24:13 +00:00
John Crispin
d7b4bf8966 kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43670
 2014-12-12 17:14:14 +00:00
Felix Fietkau
5b16fd1bf8 ar8216: enable cpu port to receive arp and broadcast frames for ar8236 
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43668
 2014-12-12 16:23:29 +00:00
John Crispin
6c4e7b22eb ralink: fix lenovo y1 wan port mapping 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43667
 2014-12-12 16:17:31 +00:00