mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
16,579 Commits 3 Branches 0 Tags 517 MiB
3c43d6fb30
Commit Graph

940 Commits

Author SHA1 Message Date
Gabor Juhos
b67bbfe287 ar71xx: fix wlan LED on the TL-WR741 board 
* Patch from #8630

SVN-Revision: 24963
 2011-01-11 08:20:47 +00:00
Gabor Juhos
dd53effe15 ar71xx: fix wrong names of the WPS LED/button 
Reported-by: Nuno Gonçalves

SVN-Revision: 24961
 2011-01-10 18:15:47 +00:00
Gabor Juhos
a894d10d4d ar71xx: remove the gpio_wr_fix patch 
SVN-Revision: 24945
 2011-01-09 09:29:51 +00:00
Gabor Juhos
23a6173099 ar71xx: use gpio_*_cansleep calls in the rb4xx NAND driver 
SVN-Revision: 24944
 2011-01-09 09:29:45 +00:00
Gabor Juhos
505f0e7a86 ar71xx: add kmod-ledtrig-usbdev for the MZK-W04NU profile as well 
SVN-Revision: 24941
 2011-01-08 21:04:57 +00:00
Gabor Juhos
271ce88567 ar71xx: add kmod-ledtrig-usbdev to the relevant profiles 
SVN-Revision: 24940
 2011-01-08 21:02:25 +00:00
Gabor Juhos
0de8689b70 ar71xx: use spinlock in ar71xx_device_{start,stop} 
SVN-Revision: 24929
 2011-01-08 11:28:32 +00:00
Gabor Juhos
271bb8385b ar71xx: add kmod-usb-ohci module for the WNDR3700 profile 
SVN-Revision: 24927
 2011-01-08 10:51:20 +00:00
Gabor Juhos
061228d73c ar71xx: make uci-default scripts executable 
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>

SVN-Revision: 24897
 2011-01-04 13:44:01 +00:00
Gabor Juhos
0f659a13dd ar71xx: add support for TL-WR740N v1 
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 24811
 2010-12-23 12:42:16 +00:00
Claudio Mignanti
2c0596cd69 unifi: add sysupgrade and leds support 
SVN-Revision: 24737
 2010-12-20 17:28:34 +00:00
Felix Fietkau
6acfae9379 ar71xx: enable ar7240 switch support on the UBNT NanoStation M Fixes broadcast frames on the second ethernet MAC 
Signed-off-by: Alexander Couzens <lynxis@c-base.org>

SVN-Revision: 24723
 2010-12-19 11:56:42 +00:00
Gabor Juhos
b512523d6f ar71xx: fix micrel phy patch (Patch from #8041.) 
SVN-Revision: 24718
 2010-12-19 10:05:55 +00:00
Gabor Juhos
cafe08a1b2 ar71xx: remove stray semicolons 
SVN-Revision: 24651
 2010-12-17 17:57:20 +00:00
Gabor Juhos
01c76bf128 ar71xx: fix WLAN LEDs on the DIR-825 board 
SVN-Revision: 24650
 2010-12-17 17:10:21 +00:00
Gabor Juhos
c1d3a23d19 ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards 
SVN-Revision: 24649
 2010-12-17 17:10:19 +00:00
Gabor Juhos
e7ea6387a3 ar71xx: use usbdev trigger for USB LEDs by default 
SVN-Revision: 24648
 2010-12-17 17:10:16 +00:00
Gabor Juhos
8390b7dc9b ar71xx: UBNT Secondary MAC address duplicate fix 
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24643
 2010-12-17 17:10:01 +00:00
Gabor Juhos
a26c3e60e2 ar71xx: populate LED configuration for WZR-HP-G300NH 
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

SVN-Revision: 24642
 2010-12-17 17:09:57 +00:00
Gabor Juhos
a2a5598c00 ar71xx: add wlan led for the TL-WR941ND 
SVN-Revision: 24612
 2010-12-15 19:55:50 +00:00
Gabor Juhos
e421d2575f ar71xx: UBNT M-Series MAC address fix 
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24611
 2010-12-15 19:55:47 +00:00
Gabor Juhos
6c1ace2f28 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards 
SVN-Revision: 24569
 2010-12-14 18:01:04 +00:00
Gabor Juhos
a7750dae90 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards 
SVN-Revision: 24568
 2010-12-14 18:01:00 +00:00
Hauke Mehrtens
b8ab3d34eb kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2 
SVN-Revision: 24486
 2010-12-11 16:07:21 +00:00
Gabor Juhos
9f38f9bf76 ar71xx: add missing files for the JA76PF board 
SVN-Revision: 24444
 2010-12-10 19:55:28 +00:00
Gabor Juhos
b680f088ba ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

SVN-Revision: 24440
 2010-12-10 17:57:51 +00:00
Gabor Juhos
5b0c83edd9 ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
SVN-Revision: 24439
 2010-12-10 17:57:48 +00:00
Gabor Juhos
83834da33b ar71xx: add default network configuration file for the TL-MR3420 
SVN-Revision: 24437
 2010-12-10 17:57:40 +00:00
Felix Fietkau
1fa3e7a941 ar71xx: do not throw compile errors if the nbg460n uboot is not selected 
SVN-Revision: 24426
 2010-12-10 16:07:27 +00:00
Gabor Juhos
d9c68341ef ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well 
SVN-Revision: 24421
 2010-12-10 15:17:08 +00:00
Gabor Juhos
081796fe47 ar71xx: add nbg460n image generation 
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 24419
 2010-12-10 15:17:03 +00:00
Felix Fietkau
8067f3f3cc ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues 
SVN-Revision: 24236
 2010-12-04 01:32:15 +00:00
Jo-Philipp Wich
6f7e2d4ce8 tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups 
SVN-Revision: 24215
 2010-12-02 20:19:55 +00:00
Gabor Juhos
79c24b2cb0 ar71xx: refresh patches 
SVN-Revision: 24210
 2010-12-01 18:40:01 +00:00
Jo-Philipp Wich
30b950154b add a new image for the TEW-652BRP which can be used with the bootloader recovery option 
SVN-Revision: 24196
 2010-11-30 02:04:57 +00:00
Imre Kaloz
ead8ab8403 update to the latest stable kernels 
SVN-Revision: 24136
 2010-11-24 18:50:11 +00:00
Gabor Juhos
9971dfe059 ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage 
r22700 contained a copy-and-paste error that set eth0's MAC address
twice and never set eth1's.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 24036
 2010-11-19 07:24:00 +00:00
Gabor Juhos
920a34c0ce ar71xx: drivers/ar71xx_wdt: fix size argument passed to copy_to_user() 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23983
 2010-11-12 18:52:45 +00:00
Gabor Juhos
3106aea40b ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOM 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23982
 2010-11-12 18:52:28 +00:00
Gabor Juhos
30ef7d55fc ar71xx: use pr_* functions in drivers 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23981
 2010-11-12 18:52:12 +00:00
Gabor Juhos
fddf3b8dac ar71xx: drivers/rb4xx_nand: remove C++ comment usage 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23980
 2010-11-12 18:51:55 +00:00
Gabor Juhos
f4d5c885e4 ar71xx: return statements does not need parenthesis 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23979
 2010-11-12 18:51:38 +00:00
Gabor Juhos
e244e1c7cd ar71xx: fix inline attribute location 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23978
 2010-11-12 18:51:21 +00:00
Gabor Juhos
acd8ad4de5 ar71xx: wrap long lines 
(build errors has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23977
 2010-11-12 18:51:04 +00:00
Gabor Juhos
eef802855a ar71xx: fix trailing statements location 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23976
 2010-11-12 18:50:47 +00:00
Gabor Juhos
500fac1735 ar71xx: fix whitespaces nits 
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23975
 2010-11-12 18:50:29 +00:00
Alexandros C. Couloumbis
0c66bb9c55 linux/ar71xx: add preliminary 2.6.37 kernel support 
SVN-Revision: 23944
 2010-11-10 16:23:42 +00:00
Claudio Mignanti
20b2a4417a Add support for Ubiquiti UniFi AP 
SVN-Revision: 23904
 2010-11-06 21:08:48 +00:00
Felix Fietkau
5f3f1b8cd8 ar71xx: Configure WNDR3700 switch LED colors properly (#8103) 
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23879
 2010-11-04 18:55:16 +00:00
Felix Fietkau
b3b2227869 Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on submitter's request 
SVN-Revision: 23878
 2010-11-04 18:53:18 +00:00