mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
14,110 Commits 3 Branches 0 Tags 517 MiB
457f4293ce
Commit Graph

39 Commits

Author SHA1 Message Date
Felix Fietkau
e4a6acf9b8 enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733) 
SVN-Revision: 20551
 2010-03-28 18:57:42 +00:00
Felix Fietkau
527accf920 ar8216: fix the mtu register definition 
SVN-Revision: 20110
 2010-03-09 21:43:16 +00:00
Felix Fietkau
513e8c583f Several small fixes for ar8216 driver (patch by Jonas Gorski) 
* Create defines for some magic values/masks.

 * Change vlan_id to u16, to allow VIDs > 255.

 * Add a range check to set_pvid as it isn't a VID, but the index
   in the vlan table.

 * Set the max VID to 4094, since 4095 is a reserved value and
   should not be used.

 * In mangle_rx replace the provided VID with the VID of the table
   entry of the port, not the index of the table.

 * In hw_apply, remove a redundant emptyness check (was already
   checked several lines above).

 * In no vlan mode do not set the ingress mode to secure, as there
   are no vlan table entries, but to use the port's destination
   masks. Otherwise the switch won't forward anything.

 * In read_status tell that the phy is up (taken from the rtl8306
   driver).

SVN-Revision: 20083
 2010-03-09 14:35:41 +00:00
Gabor Juhos
f1509eaf8c kernel: add driver for the RTL8366RB switch 
Thanks to Andrew Tarabaras.

SVN-Revision: 19837
 2010-02-24 13:39:02 +00:00
Gabor Juhos
e251cd15c9 kernel: fix typos in the AR8216 header file 
SVN-Revision: 19834
 2010-02-24 13:38:48 +00:00
Gabor Juhos
c253898e89 rtl8366_smi: sanitize gpio values to a 0/1 boolean 
SVN-Revision: 19402
 2010-01-30 15:25:12 +00:00
Gabor Juhos
6bfdc7c998 rtl8366s: reset the chip early, this allows ethernet to work as soon as possible 
SVN-Revision: 19355
 2010-01-27 21:01:48 +00:00
Gabor Juhos
49c4df5487 rtl8366: make it available on all platforms 
SVN-Revision: 19329
 2010-01-25 15:13:38 +00:00
Felix Fietkau
2bff4bf4e5 rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly 
SVN-Revision: 18709
 2009-12-09 03:25:33 +00:00
Felix Fietkau
ddc2e2270b ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309) 
SVN-Revision: 18699
 2009-12-08 14:06:18 +00:00
Felix Fietkau
df35ee622f fix link status detection in various switch drivers 
SVN-Revision: 18698
 2009-12-08 14:06:09 +00:00
Felix Fietkau
30e635c55b move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic files directory and remove patches for older kernel versions (no longer in use) 
SVN-Revision: 17594
 2009-09-16 12:24:46 +00:00
Felix Fietkau
6e28b28c5e add a driver for rtl8306 switches 
SVN-Revision: 17248
 2009-08-14 00:52:17 +00:00
Felix Fietkau
3e7d58574f ar8216: rename the vlan attribute to enable_vlan to keep it consistent with other drivers 
SVN-Revision: 16770
 2009-07-11 01:21:01 +00:00
Felix Fietkau
3455f00d7a ar8216: fix transmission of large frames by setting the switch mtu 
SVN-Revision: 16629
 2009-06-29 21:54:16 +00:00
Felix Fietkau
c1918c778c ar8216: add delay for page switching to work around register setting corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable) 
SVN-Revision: 16442
 2009-06-14 03:32:01 +00:00
Felix Fietkau
4e12c9d210 fix a crash in ip175c attribute enumeration 
SVN-Revision: 15506
 2009-04-30 13:57:22 +00:00
Felix Fietkau
a523450678 Add a driver for Atheros AR8216 switches Thanks to Vertical Communications, Inc. for providing access to the documentation 
SVN-Revision: 15482
 2009-04-29 13:02:41 +00:00
Felix Fietkau
8ec2ad91ad swconfig: add a generic switch reset call 
SVN-Revision: 15470
 2009-04-28 19:16:17 +00:00
Felix Fietkau
3fce73ce46 clean up the ip175c driver some more, add support for setting the pvid and fix querying the phy status 
SVN-Revision: 15308
 2009-04-20 21:26:44 +00:00
Felix Fietkau
f6f55bae7d swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports) 
SVN-Revision: 15307
 2009-04-20 21:26:39 +00:00
Felix Fietkau
4320a28228 add IC+ IP175C driver (based on Patrick Horn's driver, see #4050) 
SVN-Revision: 15305
 2009-04-20 18:57:55 +00:00
Felix Fietkau
787e9fcf93 swconfig: treat struct switch_attr as constant 
SVN-Revision: 15302
 2009-04-20 18:57:36 +00:00
Felix Fietkau
cd80e16a80 swconfig: remove old debugging stuff 
SVN-Revision: 15301
 2009-04-20 18:57:30 +00:00
Felix Fietkau
1929c7511c mvswitch: re-enable header mode 
SVN-Revision: 15186
 2009-04-10 11:33:49 +00:00
Felix Fietkau
bfa8064ccd atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2) instead of (0,1) for lan/wan 
SVN-Revision: 14981
 2009-03-22 20:19:23 +00:00
Felix Fietkau
f972eb41b5 mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware detection 
SVN-Revision: 14977
 2009-03-22 20:18:36 +00:00
Felix Fietkau
d1b986bd54 improve routing/nat performance for devices using the marvell 88e6060 switch 
SVN-Revision: 13060
 2008-10-28 17:54:22 +00:00
Felix Fietkau
1e570a9288 change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers. 
SVN-Revision: 13010
 2008-10-18 21:43:30 +00:00
Felix Fietkau
c7150f281c add missing defines for mvswitch 
SVN-Revision: 11895
 2008-07-21 18:12:38 +00:00
Felix Fietkau
3ad51a1c33 some more mvswitch fixes: - initialize the vlan destination map properly - workaround for moving node bug: clear the ATU database on every PHY poll 
SVN-Revision: 11881
 2008-07-19 23:09:56 +00:00
Felix Fietkau
87e673487a add extra safety for the packet mangling in the mvswitch driver 
SVN-Revision: 11880
 2008-07-19 23:09:43 +00:00
Felix Fietkau
b014357704 set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues 
SVN-Revision: 11410
 2008-06-09 10:31:46 +00:00
Felix Fietkau
9e0ee80132 enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues 
SVN-Revision: 10975
 2008-04-29 12:55:44 +00:00
Felix Fietkau
c3fcb26d47 allow bigger packets in the marvell switch (does not fix the mtu problems yet) 
SVN-Revision: 10970
 2008-04-28 21:59:06 +00:00
Felix Fietkau
86bbc820d5 fix vlan mapping for cpu port on the marvell switch 
SVN-Revision: 10934
 2008-04-24 01:09:47 +00:00
Felix Fietkau
69999abeda clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues 
SVN-Revision: 10931
 2008-04-23 16:28:05 +00:00
Felix Fietkau
11d94ce083 Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0 
SVN-Revision: 10876
 2008-04-20 08:29:01 +00:00
Felix Fietkau
a323a7bf2a Add stub driver for ADM6996F switches (configured through MII) The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a 
SVN-Revision: 10869
 2008-04-20 02:53:04 +00:00