mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
16,068 Commits 3 Branches 0 Tags 517 MiB
500fac1735
Commit Graph

345 Commits

Author SHA1 Message Date
Gabor Juhos
500fac1735 ar71xx: fix whitespaces nits 
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23975
 2010-11-12 18:50:29 +00:00
Claudio Mignanti
20b2a4417a Add support for Ubiquiti UniFi AP 
SVN-Revision: 23904
 2010-11-06 21:08:48 +00:00
Felix Fietkau
91b6c63adc ar71xx: Set eth1 MAC address from EEPROM for WNDR3700 
The WNDR3700's art/caldata partition contains three MAC addresses at
offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1,
respectively. The existing code configures eth1's MAC address by adding
1 to eth0's instead of using the value stored in the EEPROM. This patch
causes the stored value to be used directly. (On my WNDR3700s, the three
stored addresses are all sequential anyway.)

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23876
 2010-11-04 18:46:07 +00:00
Felix Fietkau
fc28e1cd7d ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai) 
SVN-Revision: 23875
 2010-11-04 18:39:49 +00:00
Felix Fietkau
b4e2c09b46 ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues 
SVN-Revision: 23822
 2010-11-03 14:55:53 +00:00
Felix Fietkau
9e2d1a194d ar71xx: use the new ar7240 switch driver for tl-wa901nd as well 
SVN-Revision: 23576
 2010-10-21 18:42:22 +00:00
Jo-Philipp Wich
a680385396 remove remaining references to dev-ap91-eth.h, patch by Stijn Tintel 
SVN-Revision: 23451
 2010-10-14 23:08:10 +00:00
Felix Fietkau
fc035b3cb6 ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver 
SVN-Revision: 23439
 2010-10-14 13:41:42 +00:00
Felix Fietkau
3941621dbc ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563) 
SVN-Revision: 23432
 2010-10-14 00:14:59 +00:00
Gabor Juhos
697f5d0bdd ar71xx: initial support for jjPlus JWAP003 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

SVN-Revision: 23165
 2010-10-01 07:09:29 +00:00
Felix Fietkau
8511c6b16c AP96: Fix LAN/WAN setup 
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23147
 2010-09-28 22:55:14 +00:00
Gabor Juhos
32d12d5e5c ar71xx: add support for the TL-MR3420 v1 board 
SVN-Revision: 23136
 2010-09-27 14:53:59 +00:00
Gabor Juhos
b831ebdde9 ar71xx: AR724[12] requires different USB setup 
SVN-Revision: 23135
 2010-09-27 14:53:57 +00:00
Gabor Juhos
cda8655910 ar71xx: use the MDIO interface of the 2nd MAC on the ar7241 
SVN-Revision: 23132
 2010-09-27 14:53:49 +00:00
Gabor Juhos
b445943cdf ar71xx: move ath9k specific PCI fixup into a separate file 
SVN-Revision: 23131
 2010-09-27 14:53:46 +00:00
Gabor Juhos
4ae167959b ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs 
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

SVN-Revision: 23130
 2010-09-27 14:53:43 +00:00
Felix Fietkau
a7bb7dd99e Add support for Atheros AP96 reference board 
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
 2010-09-27 08:59:53 +00:00
Felix Fietkau
0c6653c6e2 ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND 
SVN-Revision: 22935
 2010-09-05 16:17:06 +00:00
Gabor Juhos
b4336a8e2d ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards 
SVN-Revision: 22882
 2010-09-03 18:14:37 +00:00
Gabor Juhos
47f8fd1dde ar71xx: rewrite SPI drivers for the RB4xx boards 
* add a new SPI controller driver
  * add SPI driver for the CPLD chip
  * convert the NAND driver
  * enable the mikroSD slot
  * enable more LEDs

SVN-Revision: 22863
 2010-08-31 20:13:47 +00:00
Gabor Juhos
7bc5a672c1 ar71xx: change mac address initialization 
SVN-Revision: 22700
 2010-08-18 16:00:28 +00:00
Felix Fietkau
523fcf0497 ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 
SVN-Revision: 22675
 2010-08-16 19:21:57 +00:00
Felix Fietkau
65899cfa49 ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do 
SVN-Revision: 22401
 2010-07-27 21:04:43 +00:00
Felix Fietkau
900aaa919b ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values) 
SVN-Revision: 22353
 2010-07-22 12:37:44 +00:00
Felix Fietkau
bced5d7d74 ar71xx: set default values for the fifo cfg registers on AR724x 
SVN-Revision: 22303
 2010-07-20 01:54:11 +00:00
Gabor Juhos
95e09cccd8 ar71xx: in-flash macs and eeprom for mach-eap7660d 
This adds in-flash mac-addresses and calibration data for the Senao
EAP7660D board.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22187
 2010-07-15 07:36:52 +00:00
Gabor Juhos
7bff9c0101 ar71xx: add support for the Senao EAP7660D board 
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 21837
 2010-06-18 16:22:05 +00:00
Gabor Juhos
08c2e29018 ar71xx: avoid duplicated 'board' parameter in kernel command line 
SVN-Revision: 21805
 2010-06-14 20:02:44 +00:00
Gabor Juhos
9789f0215a ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtype 
SVN-Revision: 21764
 2010-06-12 13:20:39 +00:00
Gabor Juhos
adb0a95df1 ar71xx: fix phy_mask for the RB450 
SVN-Revision: 21743
 2010-06-09 19:48:35 +00:00
Gabor Juhos
d55ebf3a8a ar71xx: fix phy_mask on the RB433 for the IP17xx driver 
SVN-Revision: 21728
 2010-06-08 20:19:18 +00:00
Gabor Juhos
90e2b1ad6b ar71xx: fix 2.6.34 build errors 
SVN-Revision: 21698
 2010-06-07 09:18:13 +00:00
Gabor Juhos
115f845e53 ar71xx: fix nbg460n mtd partitions 
This fixes the NBG460N/550N/550NH mtd partitions.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 21443
 2010-05-14 08:37:58 +00:00
Gabor Juhos
fca9b7ebad ar71xx: remove config partition from the mtd map on the MZK-W300NH board 
This space can be used to extend the rootfs_data partition.

SVN-Revision: 21173
 2010-04-26 18:28:04 +00:00
Gabor Juhos
77b2354fcd ar71xx: fix firmware partition size on the MZK-W04NU board 
SVN-Revision: 21172
 2010-04-26 18:28:01 +00:00
Felix Fietkau
9848d38aed ar71xx: fix a wifi card stability issue 
when we receive a pci/ahb interrupt, we need to flush pending data for dma
from the device, otherwise the tx path may get stuck if the completion flag
of the dma descriptor is not updated at the time the tx interrupt arrives.

SVN-Revision: 21143
 2010-04-24 17:24:11 +00:00
Gabor Juhos
10ed3b23a6 ar71xx: reduce button threshold value on the NBG460 board 
SVN-Revision: 21076
 2010-04-21 19:07:23 +00:00
Gabor Juhos
9933d34770 ar71xx: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons 
SVN-Revision: 21075
 2010-04-21 19:07:19 +00:00
Gabor Juhos
693ea524c1 ar71xx: adding support for zyxel nbg460n/550n/550nh boards 
This patch adds support for the zyxel nbg460n/550n/550nh routers.
Currently this only works if a second stage bootloader is also flashed,
as the used switch needs extra initialization.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 20990
 2010-04-18 16:24:12 +00:00
Gabor Juhos
dd7304ec6d ar71xx: update phy masks for the Planex boards 
This avoids probing of the AR8216 chip on the eth0 interface.

Cc: backfire@openwrt.org

SVN-Revision: 20754
 2010-04-09 08:40:14 +00:00
Gabor Juhos
d6c0363884 ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards 
Cc: backfire@openwrt.org

SVN-Revision: 20752
 2010-04-09 08:40:09 +00:00
Felix Fietkau
df463abb18 ar71xx: fix ethernet on final pb92 board (previous value was based on a preliminary version) 
SVN-Revision: 20725
 2010-04-06 00:12:50 +00:00
Jo-Philipp Wich
23bebe33a7 Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices. 
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.

SVN-Revision: 20722
 2010-04-05 23:03:16 +00:00
Felix Fietkau
7983e442e1 ar71xx: fix pci on ar7241/ar7242 
SVN-Revision: 20530
 2010-03-28 00:36:37 +00:00
Felix Fietkau
9c0f21a5b9 ar71xx: fix the wan port on pb92 
SVN-Revision: 20529
 2010-03-28 00:36:04 +00:00
Felix Fietkau
2cc215f121 ar71xx: reset the mdio bus on ar7241/ar7242 
SVN-Revision: 20528
 2010-03-28 00:35:44 +00:00
Felix Fietkau
0b6e32a7b0 ar71xx: add basic kernel support for pb92 
SVN-Revision: 20495
 2010-03-26 22:35:52 +00:00
Felix Fietkau
aa3ff31b95 ar71xx: add support for ar7241 and ar7242 
SVN-Revision: 20494
 2010-03-26 22:35:41 +00:00
Felix Fietkau
4e10c56551 ar71xx: fix pci link detection for ar724x 
SVN-Revision: 20493
 2010-03-26 22:35:27 +00:00
Andy Boyett
681054333e wrt400n: lan ports don't need the ar8216 workaround 
SVN-Revision: 20491
 2010-03-26 19:09:11 +00:00