mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
18,587 Commits 3 Branches 0 Tags 517 MiB
541aa8e38e
Commit Graph

7228 Commits

Author SHA1 Message Date
Imre Kaloz
5e29e14795 upgrade to 3.0 
SVN-Revision: 27737
 2011-07-23 20:43:53 +00:00
Imre Kaloz
0cb1b5d775 3.0 is out 
SVN-Revision: 27736
 2011-07-23 20:42:58 +00:00
Hauke Mehrtens
49f4d4217e brcm47xx: build bcma into the kernel 
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.

SVN-Revision: 27733
 2011-07-23 11:19:58 +00:00
Hauke Mehrtens
5169b72c8a kernel: update bcma and ssb to version master-2011-07-22 from wireless-testing 
SVN-Revision: 27731
 2011-07-23 11:17:00 +00:00
Hauke Mehrtens
b07b5fc7b6 brcm47xx: remove old kernel versions 
SVN-Revision: 27724
 2011-07-22 18:41:24 +00:00
Hauke Mehrtens
b988168906 brcm47xx: update bcma and ssb to master-2011-07-21 
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus

SVN-Revision: 27723
 2011-07-22 16:30:42 +00:00
Hauke Mehrtens
39f491e479 kernel: update to linux-3.0 and refresh patches. 
Thank you Peter Wagner for the patch

SVN-Revision: 27722
 2011-07-22 16:04:25 +00:00
Felix Fietkau
c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240 
SVN-Revision: 27705
 2011-07-20 14:39:47 +00:00
Felix Fietkau
ca473833c4 ar71xx: configure address aging on ar7240 
SVN-Revision: 27704
 2011-07-20 14:39:42 +00:00
Felix Fietkau
fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Felix Fietkau
005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
SVN-Revision: 27702
 2011-07-20 12:04:29 +00:00
Felix Fietkau
e7ab000008 ar71xx: increase the delay after the ethernet MAC reset 
SVN-Revision: 27701
 2011-07-20 12:04:25 +00:00
Felix Fietkau
255dcaa3a6 ar71xx: fix an unused variable warning 
SVN-Revision: 27700
 2011-07-20 12:04:20 +00:00
John Crispin
8acc276692 sync default kernel config for lantiq danube/ar9 
SVN-Revision: 27697
 2011-07-19 18:08:09 +00:00
John Crispin
500d7d4bc8 fix etehrnet when using EPHY on lantiq ASE 
SVN-Revision: 27696
 2011-07-19 18:06:52 +00:00
John Crispin
78a9b1a2ad fixes pci on lantiq AR9 SoC 
SVN-Revision: 27695
 2011-07-19 18:06:42 +00:00
John Crispin
3833b7be24 add support for more lantiq AR9 boards 
SVN-Revision: 27694
 2011-07-19 18:06:33 +00:00
Felix Fietkau
fee32761f3 kernel: backport and enable tmpfs xattr support for 2.6.39 
SVN-Revision: 27691
 2011-07-19 09:00:55 +00:00
John Crispin
6b8c119b41 * fix external interrupts 
SVN-Revision: 27687
 2011-07-18 16:27:11 +00:00
John Crispin
5906377332 * add gigasx76x update 
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
 2011-07-17 19:27:44 +00:00
Florian Fainelli
3994a2d1f9 add additionnal debug symbols when kernel debugging is enabled 
SVN-Revision: 27637
 2011-07-17 12:30:04 +00:00
Florian Fainelli
9c7294f7c7 add ehci support to DWV-S0 board (#9059) 
SVN-Revision: 27622
 2011-07-16 08:39:04 +00:00
Florian Fainelli
930485561c fix GEN_SPI_RSET_BASE macro (#9697) 
SVN-Revision: 27604
 2011-07-13 09:33:11 +00:00
Imre Kaloz
ab5fd3c1cb upgrade to 3.0-rc7 
SVN-Revision: 27600
 2011-07-12 13:44:16 +00:00
Imre Kaloz
0321740a62 upgrade to 3.0-rc6 and optimize for armv5te again 
SVN-Revision: 27592
 2011-07-11 20:35:16 +00:00
Felix Fietkau
f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau
2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Imre Kaloz
8788b97e65 use the new upstream l2cache and wdt code, smaller changes, refresh patches 
SVN-Revision: 27558
 2011-07-08 09:41:07 +00:00
Imre Kaloz
b3b0f0e49a add mpcore_wdt fixes 
SVN-Revision: 27557
 2011-07-08 09:33:13 +00:00
John Crispin
7f548d379f fix generation of falcon images for profiles 
SVN-Revision: 27550
 2011-07-07 20:20:51 +00:00
John Crispin
d7732885ed adds 2 ASC related patches to lantiq 
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
 2011-07-07 20:20:46 +00:00
John Crispin
b75a8fb532 fix up falcon kernel config 
SVN-Revision: 27542
 2011-07-07 18:20:56 +00:00
John Crispin
036df9f088 fix i2c-falcon kmod package selection 
SVN-Revision: 27541
 2011-07-07 18:20:51 +00:00
John Crispin
a463daa818 replace all references to xway with danube 
SVN-Revision: 27538
 2011-07-07 18:20:37 +00:00
John Crispin
dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube 
SVN-Revision: 27537
 2011-07-07 18:20:31 +00:00
John Crispin
3c1079a7a7 add ar9 specific profile 
SVN-Revision: 27536
 2011-07-07 18:20:27 +00:00
John Crispin
09d547eae4 rename xway profile to danube and remove ar9 specifics 
SVN-Revision: 27535
 2011-07-07 18:20:21 +00:00
John Crispin
f177052c9d remove ar9 board from xway profiles 
SVN-Revision: 27534
 2011-07-07 18:20:16 +00:00
John Crispin
dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches 
SVN-Revision: 27532
 2011-07-07 18:20:07 +00:00
Imre Kaloz
79fa6c693a refresh patches 
SVN-Revision: 27528
 2011-07-07 17:18:50 +00:00
Imre Kaloz
b8227050fb refresh patches 
SVN-Revision: 27527
 2011-07-07 17:18:06 +00:00
Imre Kaloz
92981b6bb3 enable smp support 
SVN-Revision: 27526
 2011-07-07 17:17:44 +00:00
Imre Kaloz
94055a90a7 make smp code more similar to upstream 
SVN-Revision: 27525
 2011-07-07 17:17:06 +00:00
Imre Kaloz
42df203852 3.0 is at rc6 now 
SVN-Revision: 27524
 2011-07-07 13:30:41 +00:00
Gabor Juhos
5ad4040c49 ar71xx: build image for the AP121 boards with 4M of flash 
SVN-Revision: 27523
 2011-07-07 13:01:50 +00:00
Gabor Juhos
cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards 
SVN-Revision: 27522
 2011-07-07 13:01:48 +00:00
Imre Kaloz
b15f8f765a add support for and switch to XZ compressed kernels on ARM 
SVN-Revision: 27518
 2011-07-07 10:26:16 +00:00
Imre Kaloz
d148dcce05 select the right cpu 
SVN-Revision: 27517
 2011-07-07 10:24:37 +00:00
Florian Fainelli
a3e343b722 fix building of perf for arm on uclibc 
SVN-Revision: 27514
 2011-07-07 09:43:00 +00:00
Florian Fainelli
a4d69536ea enable support for perf events 
SVN-Revision: 27512
 2011-07-07 09:42:53 +00:00
Florian Fainelli
0cb42cf9a4 enable perf counter support 
SVN-Revision: 27511
 2011-07-07 09:42:50 +00:00
Daniel Dickinson
0d8b0e937d base-files: diag.sh: added failsafe led definition 
SVN-Revision: 27502
 2011-07-07 03:09:20 +00:00
John Crispin
a674aabe54 get ready for 3.0 
SVN-Revision: 27496
 2011-07-06 17:27:17 +00:00
Gabor Juhos
abb1ca01a7 ramips: fix buffalo image generation 
SVN-Revision: 27495
 2011-07-06 16:46:33 +00:00
Imre Kaloz
a832965eff add 3.0 support 
SVN-Revision: 27493
 2011-07-06 13:03:38 +00:00
Imre Kaloz
a00596924b refresh patches 
SVN-Revision: 27492
 2011-07-06 12:57:51 +00:00
Imre Kaloz
90bd74dd8b fixup mtd refresh and co. 
SVN-Revision: 27491
 2011-07-06 12:55:21 +00:00
Imre Kaloz
f24764a372 fix myloader patch, thanks KanjiMonster 
SVN-Revision: 27490
 2011-07-06 12:48:17 +00:00
John Crispin
d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot 
SVN-Revision: 27489
 2011-07-06 10:36:56 +00:00
Imre Kaloz
c93b5653bc we have an up-to-date mach-type file now 
SVN-Revision: 27486
 2011-07-06 10:12:50 +00:00
Imre Kaloz
05790d9cba replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff 
SVN-Revision: 27485
 2011-07-06 10:09:15 +00:00
Florian Fainelli
00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block 
SVN-Revision: 27484
 2011-07-06 10:00:39 +00:00
Florian Fainelli
965567a320 refresh 2.6.39 geode patches 
SVN-Revision: 27483
 2011-07-06 10:00:05 +00:00
Gabor Juhos
1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004 
Also sort the board names alphabetically.

SVN-Revision: 27478
 2011-07-06 08:05:00 +00:00
Gabor Juhos
d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board 
SVN-Revision: 27477
 2011-07-06 08:04:55 +00:00
Gabor Juhos
2cc346b8e0 ramips: create tftp image for the WHR-G300N board 
SVN-Revision: 27476
 2011-07-06 08:04:54 +00:00
Gabor Juhos
0dc18d8586 ramips: create factory image for the WHR-G300N board 
SVN-Revision: 27474
 2011-07-06 08:04:52 +00:00
Daniel Dickinson
1141165bb9 Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. 
SVN-Revision: 27471
 2011-07-06 06:35:24 +00:00
Daniel Dickinson
9dc72505a2 profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc 
SVN-Revision: 27470
 2011-07-06 06:35:22 +00:00
Imre Kaloz
612a1fcbc4 add some symbols 
SVN-Revision: 27464
 2011-07-05 21:19:57 +00:00
Florian Fainelli
d24fc7ef56 sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423) 
SVN-Revision: 27457
 2011-07-05 12:40:50 +00:00
Imre Kaloz
c52560302d add missing symbols 
SVN-Revision: 27454
 2011-07-05 11:55:31 +00:00
Florian Fainelli
7c3bbe150a hw553: fix missing has_uart0 in board definition (#9533) 
SVN-Revision: 27448
 2011-07-04 15:04:58 +00:00
Gabor Juhos
89f6b29feb ar71xx: fix building of squashfs images 
SVN-Revision: 27446
 2011-07-04 12:10:03 +00:00
John Crispin
29653782a9 set DEFAULT_SUBTARGET for lantiq/ 
SVN-Revision: 27445
 2011-07-04 11:21:47 +00:00
John Crispin
04fefa4a28 fix broken falcon patches from last night 
SVN-Revision: 27441
 2011-07-04 07:50:34 +00:00
Gabor Juhos
e9c8218375 ramips: create factory image for DIR-300-B1 
SVN-Revision: 27439
 2011-07-04 06:48:45 +00:00
Felix Fietkau
7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650) 
SVN-Revision: 27434
 2011-07-04 03:03:34 +00:00
John Crispin
cd8166f3fd AT91: flexibity: add system uci file 
SVN-Revision: 27413
 2011-07-03 18:55:57 +00:00
John Crispin
349e97f879 AT91: Add flexibity board support 
The patch below adds AT91 Flexibity Connect board support.

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>

SVN-Revision: 27412
 2011-07-03 18:51:59 +00:00
John Crispin
2975f0aaf1 alix2: add/subtract features as needed 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27411
 2011-07-03 17:39:24 +00:00
John Crispin
0a8430bfab use netif_receive_skb on lantiq 
Signed-off-by: Luca Olivetti <luca@ventoso.org>

SVN-Revision: 27410
 2011-07-03 17:39:05 +00:00
John Crispin
058eca0b3b automatic subtarget enumaration 
SVN-Revision: 27407
 2011-07-03 17:38:23 +00:00
John Crispin
43771202d3 update lantiq/falcon patches 
SVN-Revision: 27406
 2011-07-03 17:38:11 +00:00
John Crispin
d43cbe24a5 fix description for lantiq target 
SVN-Revision: 27405
 2011-07-03 17:37:57 +00:00
Gabor Juhos
6e7b802297 ramips: merge 2.6.39 patches 
SVN-Revision: 27399
 2011-07-03 15:02:10 +00:00
Gabor Juhos
646f64d389 ramips: remove 2.6.37 stuff 
SVN-Revision: 27398
 2011-07-03 15:02:09 +00:00
Gabor Juhos
2fc6be00f4 ramips: switch to 2.6.39.2 
SVN-Revision: 27397
 2011-07-03 15:02:07 +00:00
Gabor Juhos
0fde070cf9 ramips: add 2.6.39 support 
Based on the patches from #9625

SVN-Revision: 27396
 2011-07-03 15:02:06 +00:00
Gabor Juhos
c8010517d5 ramips: add hotplug script to extract eeprom for the rt2x00 driver 
SVN-Revision: 27393
 2011-07-03 15:02:01 +00:00
Gabor Juhos
3334d0604e ramips: specify eeprom file name on RT305X 
SVN-Revision: 27392
 2011-07-03 15:02:00 +00:00
Gabor Juhos
f53cc4c439 ramips: specify eeprom file name on RT288X 
SVN-Revision: 27391
 2011-07-03 15:01:59 +00:00
Gabor Juhos
129217e127 generic: add rt2x00_platform.h 
SVN-Revision: 27390
 2011-07-03 15:01:57 +00:00
Gabor Juhos
521e495f4b ramips: add all supported boards to lib/ramips.sh 
SVN-Revision: 27389
 2011-07-03 15:01:56 +00:00
Gabor Juhos
6f54df889a ramips: check the size of the uImage in image generation 
SVN-Revision: 27388
 2011-07-03 15:01:55 +00:00
Gabor Juhos
575a5286c8 ramips: use lowercase partiion names on the WCR150GN board 
SVN-Revision: 27387
 2011-07-03 15:01:53 +00:00
Gabor Juhos
31facf0b75 ramips: use different partition names in the DIR-300-B1 image 
SVN-Revision: 27386
 2011-07-03 15:01:52 +00:00
Gabor Juhos
dbe55f08f0 ramips: force word write on flashes with AMD cmdset (#9252) 
SVN-Revision: 27385
 2011-07-03 15:01:51 +00:00
Gabor Juhos
f1cf43d468 ramips: update partition map for DIR-300-B1 
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
 2011-07-03 15:01:49 +00:00
Gabor Juhos
641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions 
SVN-Revision: 27383
 2011-07-03 15:01:48 +00:00
Gabor Juhos
381d7f05af ramips: fix a section mismatch warning 
SVN-Revision: 27382
 2011-07-03 15:01:46 +00:00
Gabor Juhos
16ad91d69f ramips: remove unused include from the common GPIO code 
SVN-Revision: 27381
 2011-07-03 15:01:44 +00:00
Gabor Juhos
c9f3e7082f ramips: disable watchdog on sysupgrade 
SVN-Revision: 27380
 2011-07-03 15:01:43 +00:00
Gabor Juhos
e70e6f6848 ramips: swap target check in image generation 
SVN-Revision: 27379
 2011-07-03 15:01:42 +00:00
Gabor Juhos
affb57ee27 ramips: update HW550-3G mtd partitions 
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
 2011-07-03 15:01:41 +00:00
Gabor Juhos
3099ffe414 ramips: set cp0_perfcount_irq for RT305X 
SVN-Revision: 27377
 2011-07-03 15:01:40 +00:00
Daniel Dickinson
f9f3ddebe8 target/patches: This has been sent upstream, but might not appear for a couple of weeks. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27373
 2011-07-03 03:20:04 +00:00
Daniel Dickinson
b0cc0067f9 target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27371
 2011-07-03 03:14:53 +00:00
Daniel Dickinson
f2d749ee15 Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped." 
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

SVN-Revision: 27370
 2011-07-03 03:14:51 +00:00
Daniel Dickinson
209a776f22 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27369
 2011-07-03 03:14:48 +00:00
Daniel Dickinson
88dcf8629d The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers. 
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27368
 2011-07-03 02:59:00 +00:00
Gabor Juhos
b3a89652a5 ar71xx: use 4k image only for the AP121 board 
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

SVN-Revision: 27357
 2011-07-02 08:37:59 +00:00
Imre Kaloz
ea8440f4c3 cns21xx belongs to the Econa family, too 
SVN-Revision: 27354
 2011-07-02 08:31:25 +00:00
Imre Kaloz
535cae8393 mark it broken 
SVN-Revision: 27349
 2011-07-02 07:26:04 +00:00
Jo-Philipp Wich
701543d3ef revert r27043 (#9513) 
SVN-Revision: 27343
 2011-07-01 19:52:57 +00:00
Jo-Philipp Wich
1edef5ec98 revert r27341, it introduce wrong behaviour for other models 
SVN-Revision: 27342
 2011-07-01 19:15:45 +00:00
Jo-Philipp Wich
3b3103b2f1 turn status LED off if device finished initializing 
SVN-Revision: 27341
 2011-07-01 18:39:53 +00:00
Imre Kaloz
0ba94475c9 upgrade avr32 u-boot to 2011.06 
SVN-Revision: 27330
 2011-07-01 11:32:01 +00:00
Imre Kaloz
84c89fb02d upgrade to 2.6.39.2 
SVN-Revision: 27329
 2011-07-01 11:31:08 +00:00
Imre Kaloz
b655c7c85a preliminary 3.0 support 
SVN-Revision: 27328
 2011-07-01 08:15:48 +00:00
Imre Kaloz
8222c7bb24 add missing kernel symbols 
SVN-Revision: 27327
 2011-07-01 08:11:16 +00:00
Felix Fietkau
a41f80bca1 fix the gpio_dev driver: remove existing forward port patches, use unlocked_ioctl on all platforms and fix the arguments to the ioctl handler (based on patch from #9198) 
SVN-Revision: 27322
 2011-07-01 03:20:13 +00:00
Gabor Juhos
f9e4619b97 ar71xx: remove CONFIG_MTD_CONCAT ifdefs from the WZR-HP-AG300H code 
The config option has been removed in 2.6.39.

SVN-Revision: 27320
 2011-06-30 12:15:33 +00:00
Hauke Mehrtens
8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot 
SVN-Revision: 27316
 2011-06-29 17:42:34 +00:00
Gabor Juhos
d98476c6bd ar71xx: merge 2.6.39 patches 
Also remove the old UART driver for ar933x.

SVN-Revision: 27314
 2011-06-29 08:57:37 +00:00
Gabor Juhos
74a88749f3 ar71xx: remove 2.6.37 support as well 
SVN-Revision: 27313
 2011-06-29 08:57:36 +00:00
Gabor Juhos
1d5378f588 ar71xx: remove 2.6.38 support 
SVN-Revision: 27312
 2011-06-29 08:57:34 +00:00
Gabor Juhos
36e7a8b33e ar71xx: switch to 2.6.39 
SVN-Revision: 27311
 2011-06-29 08:57:33 +00:00
Gabor Juhos
6627574e57 ar71xx: add 2.6.39 support 
SVN-Revision: 27310
 2011-06-29 08:57:32 +00:00
Gabor Juhos
1e138098cd ar71xx: remove ar71xx_gpio_irq_set_type 
SVN-Revision: 27309
 2011-06-29 08:57:30 +00:00
Gabor Juhos
055e317ed8 ar71xx: add separate handlers for IP3 interrupts 
SVN-Revision: 27308
 2011-06-29 08:57:29 +00:00
Gabor Juhos
59bff8bf18 ar71xx: use separate handlers for IP2 interrupts 
SVN-Revision: 27307
 2011-06-29 08:57:28 +00:00
Gabor Juhos
9d6af600e1 ar71xx: remove useless irq_desc.status initializations 
SVN-Revision: 27306
 2011-06-29 08:57:27 +00:00
Gabor Juhos
01ac07c9b3 generic: add MTD_NAND_ECC_BCH symbol for 2.6.39/3.0 
SVN-Revision: 27305
 2011-06-29 08:57:25 +00:00
Hauke Mehrtens
8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400. 
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
 2011-06-28 22:23:21 +00:00
Hauke Mehrtens
4c18da3df6 brcm47xx: add initial support for devices with bcma bus. 
Ethernet and wifi are not working and this is highly experimental.

SVN-Revision: 27301
 2011-06-28 22:21:57 +00:00
Hauke Mehrtens
3f0eed15a2 kernel: refresh patches for kernel 3.0-rc5 
SVN-Revision: 27300
 2011-06-28 20:25:39 +00:00
Hauke Mehrtens
2af4f6f634 kernel: update ssb and bcma to linux-next next-20110628 
SVN-Revision: 27299
 2011-06-28 19:33:50 +00:00
Hauke Mehrtens
c5821c1a3a kernel: update kernel to 2.6.39.2 
SVN-Revision: 27298
 2011-06-28 19:30:58 +00:00
Imre Kaloz
e80ebb769f ethernet cleanup and sata fix - thanks, Chris 
SVN-Revision: 27297
 2011-06-28 06:54:20 +00:00
Hauke Mehrtens
4c392185a6 brcm47xx: update kernel to version 2.6.39 
SVN-Revision: 27296
 2011-06-27 21:29:20 +00:00
Hauke Mehrtens
ca979845cc kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27295
 2011-06-27 21:28:40 +00:00
Hauke Mehrtens
e439de144f brcm47xx: fix Linux-3.0 and fix clock rate detection. 
SVN-Revision: 27294
 2011-06-27 20:20:11 +00:00
Hauke Mehrtens
c1873c46b8 kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27293
 2011-06-27 20:18:49 +00:00
Jo-Philipp Wich
2c6bd71767 remove remaining uci-defaults 
SVN-Revision: 27291
 2011-06-27 01:42:31 +00:00
Florian Fainelli
9f63b7326f geos: deprecate uci-defaults files 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27287
 2011-06-25 22:05:10 +00:00
Florian Fainelli
1f6047496e alix2: add config files for bridging 
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 27286
 2011-06-25 22:05:05 +00:00
Florian Fainelli
3f40c0f7df remove gpiodev, prefer sysfs gpio 
SVN-Revision: 27284
 2011-06-25 19:26:17 +00:00
Felix Fietkau
cc56af716c ar71xx: add default network config for wzr-hp-ag300h (based on a patch from #9607) 
SVN-Revision: 27283
 2011-06-25 13:54:42 +00:00
Felix Fietkau
ed7f41792a ar71xx: bring up secondary radio on wzr-hp-ag300h (fixes #9608) 
SVN-Revision: 27282
 2011-06-25 13:48:47 +00:00
Florian Fainelli
85d29f3cd0 add missing linux-3.0 config symbol 
SVN-Revision: 27269
 2011-06-24 11:43:30 +00:00
Florian Fainelli
f6e4eb15bc register SSB sprom after ethernet devices 
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

SVN-Revision: 27258
 2011-06-22 12:32:03 +00:00
Florian Fainelli
5a76c6bdd7 fix tab damage in 141-led_count.patch 
SVN-Revision: 27254
 2011-06-21 20:52:58 +00:00
Florian Fainelli
3f0f8d9c87 fix and make usable kmod-pcmcia-rsrc 
This module is also needed for e.g: kmod-bcm63xx-pcmcia

SVN-Revision: 27253
 2011-06-21 20:52:53 +00:00
Hauke Mehrtens
1c0d5f5ae2 kernel: refresh patches for kernel 3.0-rc4 
SVN-Revision: 27247
 2011-06-21 18:39:47 +00:00
Florian Fainelli
9bdf6abb9d use macros to generate SPI registers table and switches 
SVN-Revision: 27246
 2011-06-21 10:05:51 +00:00
Florian Fainelli
6cb3195b40 fix usb mis-cleanup after r27162 (#9581) 
SVN-Revision: 27243
 2011-06-20 10:04:53 +00:00
Jo-Philipp Wich
70fb318a90 Restrict Soekris specific base-files handling to Soekris profiles, based on patch by Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 27241
 2011-06-19 23:05:21 +00:00
Jo-Philipp Wich
9cd64fa754 generic: Remove IPv6 depependency of bridge in 2.6.38+ Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish). 
The codepath seems to be only taken when using IPv6, so there should be
no negative side effects when IPv6 isn't loaded. I did not measure how
big the performance impact is.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27237
 2011-06-19 22:48:53 +00:00
Florian Fainelli
ab74628c10 dev-spi.c checks for running CPU, not board code 
SVN-Revision: 27236
 2011-06-19 20:46:00 +00:00
Florian Fainelli
4dd4cbeb43 fixup patches after r27234 
SVN-Revision: 27235
 2011-06-19 20:28:38 +00:00
Florian Fainelli
7819b530da remove accidental bcm6345 related patches 
SVN-Revision: 27234
 2011-06-19 20:16:59 +00:00
Florian Fainelli
12db3df666 remove support for 2.6.37 and 2.6.38 
SVN-Revision: 27233
 2011-06-19 20:14:22 +00:00
Florian Fainelli
6bb0a608dc switch to 2.6.39 
SVN-Revision: 27232
 2011-06-19 20:12:45 +00:00
Florian Fainelli
bcada2640b remove 2.6.35 and 2.6.32 support 
SVN-Revision: 27230
 2011-06-19 20:09:40 +00:00
Florian Fainelli
67d0ca0b4b remove pre 2.6.39 patches and config 
SVN-Revision: 27229
 2011-06-19 20:09:00 +00:00
Florian Fainelli
34db3f9f86 remove 2.6.37 patches and config 
SVN-Revision: 27228
 2011-06-19 20:07:26 +00:00
Gabor Juhos
e6af77a1c8 ar71xx: cleanup AR933X UART driver 
SVN-Revision: 27222
 2011-06-19 13:17:51 +00:00
Gabor Juhos
066e04d497 ar71xx: fix uart clock frequency for AR933X 
SVN-Revision: 27221
 2011-06-19 13:17:50 +00:00
Hauke Mehrtens
47e218c426 brcm47xx: refresh patches 
SVN-Revision: 27219
 2011-06-18 15:53:14 +00:00
Hauke Mehrtens
79a7343560 kernel: update to kernel 2.6.38.8 
SVN-Revision: 27218
 2011-06-18 15:52:15 +00:00
Hauke Mehrtens
75f9e0c615 brcm47xx: add support for kernel 3.0 
SVN-Revision: 27217
 2011-06-18 15:24:44 +00:00
Rod Whitby
710409740e ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box. 
SVN-Revision: 27202
 2011-06-17 11:22:22 +00:00
Florian Fainelli
b97459eb88 add missing USBIP_CORE item in config-3.0 
SVN-Revision: 27195
 2011-06-16 14:34:50 +00:00
Florian Fainelli
540b838998 allow any console to be used 
SVN-Revision: 27193
 2011-06-16 14:34:44 +00:00
Florian Fainelli
426dccd019 bcm63xx: Add support for Linux 3.0-rc3 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27192
 2011-06-16 14:34:40 +00:00
Hauke Mehrtens
235e331987 linux/generic: Add support for 3.0-rc3 
Also make linux identify itself properly as 3.0, not 3.0.0.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27191
 2011-06-15 21:31:01 +00:00
Hauke Mehrtens
bf64ac730a bcm47xx: Remove kernel checks from image Makefile 
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27185
 2011-06-15 21:11:49 +00:00
Jo-Philipp Wich
5752efdadd 2.6.39.1: missing kernel symbols If you turn on I2C, you'll need this symbol defined. 
Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27182
 2011-06-15 18:18:32 +00:00
Felix Fietkau
dcddcfca24 add missing kernel config symbols for usb on powerpc 
SVN-Revision: 27181
 2011-06-15 18:07:26 +00:00
Jo-Philipp Wich
d39379296c backport upstream Kernel commit 1ed2f73d90fb49bcf5704aee7e9084adb882bfc5 (netfilter: IPv6: fix DSCP mangle code) 
SVN-Revision: 27179
 2011-06-15 14:11:33 +00:00
Jo-Philipp Wich
14913ab8b0 revert r26997, it does not apply against 2.6.36.4 
SVN-Revision: 27178
 2011-06-15 13:51:57 +00:00
Florian Fainelli
685a61eb6c switch to 2.6.39 
SVN-Revision: 27175
 2011-06-14 20:05:13 +00:00
Florian Fainelli
0fb8884efe fix diag.sh with qube2 front led 
SVN-Revision: 27174
 2011-06-14 20:05:09 +00:00
Florian Fainelli
dee0010ae2 resync kernel config 
SVN-Revision: 27173
 2011-06-14 20:05:03 +00:00
John Crispin
0732b2db78 Fix for bug where the iniatialisation of the MAC data private strucure 
is copied into the wrong location.

Ticket #9547

Signed-off-by: Conor O'Gorman <conor at dna.ie>

SVN-Revision: 27172
 2011-06-13 22:37:23 +00:00
Florian Fainelli
7a96525a6f replace unfortify patch with a better one 
Thanks to Richard Weinberger for providing this patch

SVN-Revision: 27168
 2011-06-13 12:45:12 +00:00
Gabor Juhos
b7e016ba42 ar71xx: use ar933x_uart.h in the AR933X serial driver 
SVN-Revision: 27166
 2011-06-13 08:12:40 +00:00
Gabor Juhos
b58ede16a5 ar71xx: update early_printk code 
SVN-Revision: 27165
 2011-06-13 08:12:38 +00:00
Florian Fainelli
6a5112a750 cleanup files using checkpatch.pl 
SVN-Revision: 27162
 2011-06-12 19:17:57 +00:00
John Crispin
fa59bb0958 * move patches around * add basic support for gigaset sx76x 
SVN-Revision: 27158
 2011-06-12 08:56:26 +00:00
Vasilis Tsiligiannis
70106f153d Remove trailing spaces, convert spaces to tabs 
SVN-Revision: 27153
 2011-06-09 19:30:50 +00:00
John Crispin
e3e2a170cd we dont need 1024 bytes buffer. 128 bytes is enough. 
SVN-Revision: 27143
 2011-06-09 07:08:54 +00:00
John Crispin
8329ecf92c * revert accidental config change 
SVN-Revision: 27142
 2011-06-09 05:10:18 +00:00
John Crispin
ed0e649a5b * fixes spi flash for ar9 
* adds limited support for netgear dgn3500 (enough for others to start working with)

SVN-Revision: 27137
 2011-06-08 17:57:55 +00:00
Felix Fietkau
9160e06af5 ar71xx: override inittab to enable login on ttyATH0 
SVN-Revision: 27128
 2011-06-07 17:07:10 +00:00
Florian Fainelli
e7b6721f4e update to 2.6.39.1 
SVN-Revision: 27114
 2011-06-04 18:27:14 +00:00
Florian Fainelli
d97f50b69b define UIMAGE for various rootfs targets 
SVN-Revision: 27113
 2011-06-04 18:27:09 +00:00
Florian Fainelli
429745edd6 use IMG_PREFIX for image name 
SVN-Revision: 27112
 2011-06-04 18:27:04 +00:00
Florian Fainelli
4aaf590909 add more config symbols to 2.6.39 
SVN-Revision: 27111
 2011-06-04 18:27:00 +00:00