mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
24,249 Commits 3 Branches 0 Tags 517 MiB
78a66975d6
Commit Graph

10192 Commits

Author SHA1 Message Date
Florian Fainelli
78a66975d6 brcm63xx: remove support for 3.8 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36948
 2013-06-17 19:32:47 +00:00
Florian Fainelli
d2894412d8 brcm63xx: switch to 3.9 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36947
 2013-06-17 19:32:42 +00:00
Florian Fainelli
f03bbaf065 brcm63xx: fix missing antislash in BCM6345 ethernet patch 
This would cause build failure when disabling support for particular
CPUs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36946
 2013-06-17 19:32:35 +00:00
Felix Fietkau
d3a7b5633c kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override (#13702) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36937
 2013-06-15 11:50:50 +00:00
Hauke Mehrtens
9492d445de brcm47xx: run make kernel_oldconfig for 3.9 kernel config 
SVN-Revision: 36928
 2013-06-12 14:51:50 +00:00
Hauke Mehrtens
87f994d16d brcm47xx: remove support for kernel 3.6 
SVN-Revision: 36927
 2013-06-12 14:48:45 +00:00
Hauke Mehrtens
990423f3ef brcm47xx: add initial support for kernel 3.9 
SVN-Revision: 36926
 2013-06-12 14:47:53 +00:00
Steven Barth
46d199d1e8 linux: add ipv6 failed-policy routing action (by Jonas Gorski) 
SVN-Revision: 36911
 2013-06-11 09:27:53 +00:00
John Crispin
76c79f50d7 lantiq: Fixes to athxk EEPROM loading 
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36901
 2013-06-10 08:25:12 +00:00
John Crispin
7638caf35d lantiq: make kernel_oldconfig 
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36900
 2013-06-10 08:25:07 +00:00
John Crispin
f7daed8b9a lantiq: diag.sh with both red and green power LEDs 
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36899
 2013-06-10 08:25:02 +00:00
John Crispin
fc9532aeaa ramips: add HAME MPR-A2 support 
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>

SVN-Revision: 36898
 2013-06-10 08:24:56 +00:00
John Crispin
30786d2dd0 ramips: add support for belkin F7C027 wemo/homeautomatisation plug 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 36897
 2013-06-10 08:24:50 +00:00
Luka Perkov
da7590cd21 lantiq: fix formating in .dts files 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36882
 2013-06-08 11:36:07 +00:00
Felix Fietkau
ab529a529b ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36879
 2013-06-07 13:42:50 +00:00
Felix Fietkau
1ace51360f kernel/generic: add a few missing kernel config symbols 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36878
 2013-06-07 13:42:39 +00:00
Florian Fainelli
2b9d084af9 brcm63xx: add user-space support for Netgear CVG834G 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36877
 2013-06-06 22:22:20 +00:00
Florian Fainelli
42e69f45c7 brcm63xx: add kernel space and image support for the Netgear CVG834G 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36876
 2013-06-06 22:22:14 +00:00
Florian Fainelli
966d47989b brcm63xx: add Broadcom cable modem firmware format header 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36875
 2013-06-06 22:22:09 +00:00
Florian Fainelli
600b59642e brcm63xx: add support for BCM3368 
Add support for the Broadcom BCM3368 cable modem chipset, includes:
- Ethernet
- SPI
- UARTs
- GPIOs
- PCI

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36874
 2013-06-06 22:21:58 +00:00
Jonas Gorski
1beaf031d1 target: don't build jffs2 nor images by default 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
 2013-06-05 20:58:59 +00:00
Jonas Gorski
dd9a24663b omap24xx: convert to use the new jffs2_nand 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36862
 2013-06-05 20:58:55 +00:00
Jonas Gorski
e7b504ce8e kirkwood: convert to use the new jffs2_nand 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36861
 2013-06-05 20:58:53 +00:00
Imre Kaloz
799bdc990a there's no reason to have these generic files in the bin dir either 
SVN-Revision: 36852
 2013-06-05 06:46:41 +00:00
Imre Kaloz
28e8b8dc05 only copy uImages to the bin dir on ramdisk builds 
SVN-Revision: 36851
 2013-06-05 06:17:12 +00:00
Imre Kaloz
e161581d45 don't copy the zImages to the bin dir, factory u-boots can't use them 
SVN-Revision: 36850
 2013-06-05 06:04:48 +00:00
Gabor Juhos
5bb2e8030d ar71xx: add support for WIFI button on tp-link tl-mr3220v2 
The TP-LINK TL-MR3220 v2 has a button on the left side
labeled "WIFI". This is GPIO 24. This patch adds the
support for this button.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36848
 2013-06-04 13:25:54 +00:00
Gabor Juhos
d187e3c32e generic: add port mirroring/monitoring capability to rtl8366rb switch 
This patch adds swlib attributes to the RTL8366RB switch/PHY found in the
TL-WR1043ND router that allow to mirror ethernet packets to a monitor port.

Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36847
 2013-06-04 13:25:52 +00:00
Imre Kaloz
a0e412a616 versioned files and dirs still make no sense when you support only a single kernel... 
SVN-Revision: 36836
 2013-06-04 11:29:01 +00:00
Imre Kaloz
3a56df33ad refresh patches 
SVN-Revision: 36835
 2013-06-04 11:24:42 +00:00
Imre Kaloz
8170c9cfb0 add some more symbols 
SVN-Revision: 36834
 2013-06-04 11:23:27 +00:00
Imre Kaloz
812bb43a47 move DT2 related kernel options into the harddist subtarget 
SVN-Revision: 36833
 2013-06-04 11:19:41 +00:00
Imre Kaloz
58fa46c90c drop support for the dns323 
SVN-Revision: 36832
 2013-06-04 11:13:18 +00:00
John Crispin
e9ef65175d lantiq: revert [36779] as it caused a regression 
submitter was informed of a endinaess swap regression and replied with "works on my board"

revert the patch and make arv7518 wifi work again

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36807
 2013-05-31 13:25:07 +00:00
Gabor Juhos
da66ea52ec ar71xx: register USB port for RB2011U* devices 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36801
 2013-05-30 17:38:31 +00:00
Gabor Juhos
23bcceb058 ar71xx: create a separated network interface for the RB2011UAS SFP port 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36800
 2013-05-30 17:38:30 +00:00
Gabor Juhos
151dca0935 ar71xx: make the SFP port usable on RB2011*S boards 
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36799
 2013-05-30 17:38:28 +00:00
Gabor Juhos
a1f91282b4 generic: ar8216: allow to specify SGMII config via platform data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36798
 2013-05-30 17:38:26 +00:00
Gabor Juhos
c170d3c3e4 generic: ar8216: add get_port_link callback 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36797
 2013-05-30 17:38:22 +00:00
Gabor Juhos
3467b17e69 ar71xx: rb2011: add switch led control values 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36796
 2013-05-30 17:38:21 +00:00
Gabor Juhos
4cf6e53ccc ar71xx: rb2011: update RGMII RX/TX delay values 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36795
 2013-05-30 17:38:20 +00:00
Gabor Juhos
6da63a8793 ar71xx: rb2011: move NAND nCE init to rb2011_nand_init 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36794
 2013-05-30 17:38:17 +00:00
Gabor Juhos
50c59c4797 ar71xx: add user-space support for RB2011UAS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36793
 2013-05-30 17:38:15 +00:00
Gabor Juhos
d6554bf66a ar71xx: add kernel support for the RB2011UAS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36792
 2013-05-30 17:38:13 +00:00
Gabor Juhos
8e56b1e742 generic: ar8216: show chip revision in the kernel log 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36791
 2013-05-30 16:25:14 +00:00
Gabor Juhos
d19dae6e2d ar71xx: add profile and build image for the Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36790
 2013-05-30 16:23:10 +00:00
Gabor Juhos
35b5b38316 ar71xx: add user-space support for TP-LINK Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36789
 2013-05-30 16:23:09 +00:00
Gabor Juhos
91d7c3efc1 ar71xx: add kernel support for the TP-LINK Archer C7 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36788
 2013-05-30 16:23:07 +00:00
Gabor Juhos
f02765086d ar71xx: add USB workarounds for AR934x/QCA955x SoCs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36787
 2013-05-30 16:23:06 +00:00
Gabor Juhos
6ff976a87a ar71xx: add profile and build image for the DIR-601-B1 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36786
 2013-05-30 16:19:30 +00:00