mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
18,213 Commits 3 Branches 0 Tags 517 MiB
9c7294f7c7
Commit Graph

449 Commits

Author SHA1 Message Date
Florian Fainelli
9c7294f7c7 add ehci support to DWV-S0 board (#9059) 
SVN-Revision: 27622
 2011-07-16 08:39:04 +00:00
Florian Fainelli
930485561c fix GEN_SPI_RSET_BASE macro (#9697) 
SVN-Revision: 27604
 2011-07-13 09:33:11 +00:00
Florian Fainelli
00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block 
SVN-Revision: 27484
 2011-07-06 10:00:39 +00:00
Daniel Dickinson
1141165bb9 Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. 
SVN-Revision: 27471
 2011-07-06 06:35:24 +00:00
Daniel Dickinson
9dc72505a2 profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc 
SVN-Revision: 27470
 2011-07-06 06:35:22 +00:00
Florian Fainelli
7c3bbe150a hw553: fix missing has_uart0 in board definition (#9533) 
SVN-Revision: 27448
 2011-07-04 15:04:58 +00:00
Hauke Mehrtens
c5821c1a3a kernel: update kernel to 2.6.39.2 
SVN-Revision: 27298
 2011-06-28 19:30:58 +00:00
Hauke Mehrtens
ca979845cc kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27295
 2011-06-27 21:28:40 +00:00
Florian Fainelli
3f40c0f7df remove gpiodev, prefer sysfs gpio 
SVN-Revision: 27284
 2011-06-25 19:26:17 +00:00
Florian Fainelli
f6e4eb15bc register SSB sprom after ethernet devices 
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

SVN-Revision: 27258
 2011-06-22 12:32:03 +00:00
Florian Fainelli
5a76c6bdd7 fix tab damage in 141-led_count.patch 
SVN-Revision: 27254
 2011-06-21 20:52:58 +00:00
Florian Fainelli
3f0f8d9c87 fix and make usable kmod-pcmcia-rsrc 
This module is also needed for e.g: kmod-bcm63xx-pcmcia

SVN-Revision: 27253
 2011-06-21 20:52:53 +00:00
Florian Fainelli
9bdf6abb9d use macros to generate SPI registers table and switches 
SVN-Revision: 27246
 2011-06-21 10:05:51 +00:00
Florian Fainelli
ab74628c10 dev-spi.c checks for running CPU, not board code 
SVN-Revision: 27236
 2011-06-19 20:46:00 +00:00
Florian Fainelli
4dd4cbeb43 fixup patches after r27234 
SVN-Revision: 27235
 2011-06-19 20:28:38 +00:00
Florian Fainelli
7819b530da remove accidental bcm6345 related patches 
SVN-Revision: 27234
 2011-06-19 20:16:59 +00:00
Florian Fainelli
12db3df666 remove support for 2.6.37 and 2.6.38 
SVN-Revision: 27233
 2011-06-19 20:14:22 +00:00
Florian Fainelli
6bb0a608dc switch to 2.6.39 
SVN-Revision: 27232
 2011-06-19 20:12:45 +00:00
Florian Fainelli
426dccd019 bcm63xx: Add support for Linux 3.0-rc3 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27192
 2011-06-16 14:34:40 +00:00
Florian Fainelli
016e8dee34 bcm63xx: Add support for 2.6.39 
Add support for Kernel 2.6.39. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27019
 2011-05-27 09:54:52 +00:00
Florian Fainelli
590c82cec1 bcm63xx: Add support for 2.6.38 
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27018
 2011-05-27 09:54:48 +00:00
Florian Fainelli
68cb138154 fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch 
SVN-Revision: 27014
 2011-05-26 13:53:00 +00:00
Florian Fainelli
762885081a renumber patches accordingly 
SVN-Revision: 27013
 2011-05-26 13:52:56 +00:00
Florian Fainelli
2785e3fc12 renumber board patches 
SVN-Revision: 27012
 2011-05-26 12:09:15 +00:00
Florian Fainelli
16dfe8b4d1 add support for BT Voyager 2110 (#8810) 
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 26959
 2011-05-20 10:06:25 +00:00
Florian Fainelli
6c8387fe15 add support for DSL-2640B rev B2 
Signed-off-by: Adrian Feliks <mexit@o2.pl>

SVN-Revision: 26958
 2011-05-20 10:06:22 +00:00
Florian Fainelli
031ea08ef0 refresh patches 
SVN-Revision: 26957
 2011-05-20 10:06:18 +00:00
Florian Fainelli
3e83f60a66 add support for D-Link DVA-G3810BN/TL 
This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>

SVN-Revision: 26956
 2011-05-20 10:06:15 +00:00
Florian Fainelli
f0a99c1692 add support for BT Voyager 2500 (#9070) 
SVN-Revision: 26954
 2011-05-20 10:06:07 +00:00
Florian Fainelli
acf0ec224f add support for USR9108 LEDs (#9372) 
SVN-Revision: 26953
 2011-05-20 10:06:04 +00:00
Florian Fainelli
9c8a2d5961 bcm63xx: Add support for the T-Home Speedport W 303V 
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26878
 2011-05-11 13:34:14 +00:00
Florian Fainelli
7d3b735854 bcm63xx: Update support for the DSL-274xB revision C 
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26876
 2011-05-11 13:33:50 +00:00
Florian Fainelli
0fb1c2d537 bcm63xx: Accept any led with power in its name as power led 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26875
 2011-05-11 13:33:45 +00:00
Florian Fainelli
c6af9c23b7 bcm63xx: Decouple Board ID and image name for fixup 
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26874
 2011-05-11 13:33:41 +00:00
Florian Fainelli
de02a2795b fill maintainer infos for a couple of targets 
SVN-Revision: 26836
 2011-05-06 12:37:36 +00:00
Hauke Mehrtens
fcb1557a3e brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. 
SVN-Revision: 26829
 2011-05-05 14:05:21 +00:00
Hauke Mehrtens
3dbb8c5088 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801
 2011-05-01 20:28:35 +00:00
Felix Fietkau
1fcd26091b brcm63xx: remove patches/configs for 2.6.35 
SVN-Revision: 26709
 2011-04-17 18:39:46 +00:00
Daniel Dickinson
8b18ce6807 Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch. 
SVN-Revision: 26699
 2011-04-17 01:15:47 +00:00
Daniel Dickinson
0d722113b9 Generate images for RTA1320_16M-based routers 
SVN-Revision: 26681
 2011-04-15 14:31:36 +00:00
Daniel Dickinson
f83c5938d2 bcm63xx: Move the OpenWrt rootfs length field 
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.

To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.

Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26680
 2011-04-15 12:18:25 +00:00
Hauke Mehrtens
50c743e79e kernel: Update to version 2.6.37.6 
Thank you Peter Wagner for the patch

SVN-Revision: 26441
 2011-04-03 13:59:07 +00:00
Daniel Dickinson
33b864e899 Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices. 
SVN-Revision: 26387
 2011-03-31 06:16:23 +00:00
Florian Fainelli
aa580d336b bcm63xx: Really fix the flash driver in 2.6.37 
Read back the actual rootfs length from the image tag.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25938
 2011-03-07 16:55:01 +00:00
Florian Fainelli
9dd1454044 fix patches after 2.6.37 update, patch from KanjiMonster 
SVN-Revision: 25810
 2011-03-01 16:02:38 +00:00
Florian Fainelli
94a22b91fc add support for 2.6.37, patches from KanjiMonster 
SVN-Revision: 25629
 2011-02-20 19:59:22 +00:00
Florian Fainelli
8cc16aa14e add support for HW553 bcm6358-based boards (#8844) 
SVN-Revision: 25590
 2011-02-19 15:44:06 +00:00
Florian Fainelli
b7f8e1276d add support for 'MAGIC' bcm6348-based board 
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.

I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )

Thanks to KanjiMonster for the support on the IRC channel.

Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>

SVN-Revision: 25584
 2011-02-19 12:44:27 +00:00
Florian Fainelli
31709b2c76 update to 2.6.35.11 
SVN-Revision: 25582
 2011-02-19 12:44:16 +00:00
Florian Fainelli
2d3ed6dc2d fix T-Com Speedport W 500V default config 
The device is called SPW500V, not SP500W.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25431
 2011-02-09 13:09:02 +00:00