Commit Graph

29735 Commits

Author SHA1 Message Date
John Crispin
1e8a83e553 uqmi: Add --delete-message for deleting SMS messages
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43504
2014-12-03 09:17:28 +00:00
John Crispin
ff02ea36e0 mtd: make the mtd dump call run properly on nand flash
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43503
2014-12-02 19:28:23 +00:00
Felix Fietkau
5331a85501 kernel/modules: package xhci for kernel>=3.18
xhci-hcd was split into xhci-pci and xhci-platform since 3.18

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43502
2014-12-02 19:26:45 +00:00
John Crispin
8a9979e57a gemini: update ethernet driver, register ethernet on nas4220 board
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43501
2014-12-02 18:27:54 +00:00
John Crispin
da988d582f mtd: add ability to dump a mtd device
this can be used on nand flashes and will skip bad blocks and run ecc on the
read data before dumping it.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43500
2014-12-02 18:27:49 +00:00
John Crispin
283d7789ee uboot-oxnas: bump to U-Boot 2014.10
A few trivial changes were needed to adapt to upstream framework changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43499
2014-12-02 15:25:37 +00:00
John Crispin
a122c1c9c9 oxnas: switch CRC32 implementation to SLICEBY8
similar to what was observed on kirkwood this significantly accelerates
btrfs write operations.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43498
2014-12-02 15:25:28 +00:00
John Crispin
9430e86b61 oxnas/kd20: add usb-storage to default package set
KD20 got a built-in card-reader wired to the USB-3 root-hub.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43497
2014-12-02 15:25:14 +00:00
John Crispin
46814be2a8 oxnas/kd20: use gpio-beeper
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43496
2014-12-02 15:25:09 +00:00
John Crispin
c2e57fcb2f kernel/modules: package gpio-beeper
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43495
2014-12-02 15:25:03 +00:00
John Crispin
ae51d64671 au1000: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43494
2014-12-02 15:23:37 +00:00
John Crispin
5698e62ecb opkg: the PKG_UPGRADE env was not set properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43493
2014-12-02 15:21:50 +00:00
John Crispin
3b1b3c5067 procd: drop the zram dependencies, theu caused a recursive deps warning
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43492
2014-12-02 13:16:06 +00:00
Felix Fietkau
f11b61ae18 realview: refresh kernel patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43491
2014-12-02 13:14:59 +00:00
John Crispin
b1bc985d57 procd: reintroduce /sys/fs/cgroup mount
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43490
2014-12-02 12:41:15 +00:00
John Crispin
43131d62a8 procd: add support for zram compressed /tmp
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43489
2014-12-02 11:13:28 +00:00
John Crispin
417e67b6b1 realview: fix up the phyoffset patch
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43488
2014-12-01 21:45:18 +00:00
John Crispin
b5675ad92a kirkwood: enable mvsw6171 switch driver on EA4500
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43487
2014-12-01 21:30:40 +00:00
John Crispin
9b5f583906 kernel: add driver for Marvell 88E6171 switch
This is a swconfig driver for the Marvell 88E6171 switch,
which is a 7-port GigE switch with two CPU ports and 64
802.1q VLANs.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43486
2014-12-01 21:30:35 +00:00
Felix Fietkau
b8dd6bb189 fstools: update to the latest version, fixes sysupgrade on linux 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43485
2014-12-01 21:10:42 +00:00
Felix Fietkau
03b49664e5 ath10k: init devices synchronously to fix wifi detection at boot
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43484
2014-12-01 20:01:05 +00:00
Felix Fietkau
fe05893ffb openvpn: update to 2.3.6, fixes CVE-2014-8104
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43482
2014-12-01 19:49:59 +00:00
John Crispin
374f8a04e1 malta: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43481
2014-12-01 18:46:29 +00:00
John Crispin
4c044e8118 fstools: make the block tool ignore case when comparing uuid strings
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43480
2014-12-01 18:46:23 +00:00
Felix Fietkau
d1c0a65266 kernel: update 3.18 to rc7
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43479
2014-12-01 17:38:54 +00:00
John Crispin
70c3a60947 util-linux: fix more missing dependencies introduced by r43459
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43478
2014-12-01 16:50:43 +00:00
John Crispin
2dad4c2e07 uqmi: fix SEGFAULT on reading Unicode sms messages
Added complementary blobmsg_close_table() before returning from function
on error.

Signed-off-by: Sławomir Demeszko <s.demeszko@wireless-instruments.com>

SVN-Revision: 43477
2014-12-01 16:23:55 +00:00
John Crispin
afbbf3084d util-linux: fix missing dependency introduced by r43459
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43476
2014-12-01 16:18:15 +00:00
John Crispin
ad1592e02c oxnas: change visible board name
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43475
2014-12-01 16:15:37 +00:00
John Crispin
aa9141046f oxnas: ehci: rename vendor prefix plxtch to plxtech
it was changed in DTS by commit
oxnas-target: fix typo in OX820 device-tree

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43474
2014-12-01 16:15:30 +00:00
John Crispin
d40842d180 hostapd: improve 802.1x dynamic vlan support with bridge names
In r41872 and r42787 Dynamic VLAN support was reintroduced, but the vlan_bridge
parameter is not read while setting up the config, so the default is used which
is undesirable for some uses.

Signed-off-by: Ben Franske <ben.mm@franske.com>

SVN-Revision: 43473
2014-12-01 16:15:20 +00:00
John Crispin
b0d2a9e77a base-files: default_postinst() - create user:group first (resend)
create user:group before running postinst-pkg. the postinst hook might require
the user:group to already exist.

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 43472
2014-12-01 16:15:13 +00:00
John Crispin
ecd27db757 ar8216: factor out reg_port_stats_base parameters to ar8xxx_chip
Factor out reg_port_stats_base parameters to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43471
2014-12-01 16:15:08 +00:00
John Crispin
ae15531bd2 ar8216: factor out mii_lo_first to ar8xxx_chip
Factor out mii_lo_first to ar8xxx_chip.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43470
2014-12-01 16:15:02 +00:00
John Crispin
ea9324f3d3 ar8216: factor out chip-specific data structures from ar8xxx_priv
Factor out chip-specific data structures from ar8xxx_priv.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43469
2014-12-01 16:14:54 +00:00
John Crispin
a3b651635f ar8216: factor out set_mirror_regs to ar8xxx_chip
Factor out set_mirror_regs to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43468
2014-12-01 16:14:43 +00:00
John Crispin
b82a08f5b6 ar8216: factor out mib_func to ar8xxx_chip
Factor out mib_func to ar8xxx_chip. Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43467
2014-12-01 16:14:39 +00:00
John Crispin
af003867b1 ar8216: factor out info whether switch should be configured at probe stage to ar8xxx_chip
Factor out info whether switch should be configured at probe stage
to ar8xxx_chip. Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43466
2014-12-01 16:14:32 +00:00
John Crispin
84df2274ff realview: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43465
2014-12-01 16:14:26 +00:00
John Crispin
c27ee280ce ixp4xx: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43464
2014-12-01 16:14:21 +00:00
John Crispin
00f5d358ac au1000: add 3.14 support
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43463
2014-12-01 16:14:07 +00:00
John Crispin
610311436e ar71xx: Add build profile for the gl-inet 6416A and 6408A
Patch to add the buildprofile for the GL-Init-6408A-v1 and the GL-Inet-6416A-v1
Both devices are identical, only difference is one comes with 8MB flash and
the other with 16MB flash

Official website: http://www.gl-inet.com/w/?page_id=241&lang=en
Comprehensive list of specs: https://revspace.nl/GL-Inet

Signed-off-by: Martijn Zilverschoon <martijn@friedzombie.com>

SVN-Revision: 43462
2014-12-01 16:14:02 +00:00
Jonas Gorski
387fd3ca26 brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
2014-12-01 13:27:26 +00:00
Jonas Gorski
100e2feb22 toolchain-headers: also copy asm-eva.h for mips(el) for 3.15+
Kernel 3.15's asm.h includes eva-asm.h, so copy it also, else lzma-loader
won't compile due to a missing include.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43460
2014-12-01 13:27:06 +00:00
Luka Perkov
36063edf53 util-linux: package libsmartcols
Packages fdisk and lsblk were missing dependency for libsmartcols.so.1

Add package for libsmartcols and add dependency from fdisk and lsblk.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43459
2014-12-01 12:40:06 +00:00
Felix Fietkau
c3a7057e43 mkimage: remove check for miscompiled __weak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43458
2014-12-01 11:07:30 +00:00
Jonas Gorski
e8068f0b1b brcm63xx: register interrupt-controllers through DT when possible
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43457
2014-12-01 00:52:07 +00:00
Jonas Gorski
443d730da8 brcm63xx: dtsi: add missing ranges properity to ubus nodes
Allows nodes behind it to be mapped.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43456
2014-12-01 00:51:56 +00:00
Jonas Gorski
d9a2c55806 brcm63xx: dtsi: add missing properties to cpu nodes
Mark them as cpu nodes and add the addresses.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43455
2014-12-01 00:51:53 +00:00
Jonas Gorski
ef4f69adc0 brcm63xx: convert to irq domain
Add irq-domain aware irqchip drivers for the irq controllers of bcm63xx
and switch to use them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43454
2014-12-01 00:51:51 +00:00