mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
24,582 Commits 3 Branches 0 Tags 517 MiB
a5e70c13f8
Commit Graph

1185 Commits

Author SHA1 Message Date
Felix Fietkau
a5e70c13f8 mac80211: fix a crash in legacy minstrel when no STA exists 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37342
 2013-07-15 12:35:23 +00:00
John Crispin
3cfa187818 kernel: add usb-dwc2 kmod 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37338
 2013-07-15 11:08:04 +00:00
Hauke Mehrtens
13f3c9dbe5 mac80211: b43: load b43 on core rev 17 and 18. 
This is now controlled by a module parameter and the default
configuration depends on brcmsmac being installed.
This patch causes b43 to take core rev 17 and 18 always by default.

SVN-Revision: 37307
 2013-07-14 14:23:04 +00:00
Hauke Mehrtens
71230b33c1 mac80211: b43: activate LP-Phy support every time 
SVN-Revision: 37305
 2013-07-14 14:13:32 +00:00
Hauke Mehrtens
a5c0ad6354 brcm47xx: add initial support for kernel 3.10 
SVN-Revision: 37287
 2013-07-14 13:44:45 +00:00
Hauke Mehrtens
ef0b9be95e brcm47xx: do not load the kernel modules needed for Ethernet manually 
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.

SVN-Revision: 37284
 2013-07-14 12:59:00 +00:00
Hauke Mehrtens
9a5a262324 broadcom-diag: make it work with kernel 3.10 
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.

SVN-Revision: 37280
 2013-07-14 11:30:31 +00:00
Hauke Mehrtens
c7370edf98 broadcom-diag: check the correct value for not null. 
This also fixes a compile warning.

SVN-Revision: 37279
 2013-07-14 11:28:37 +00:00
Hauke Mehrtens
63d818a219 broadcom-diag: reoder some parts. 
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.

SVN-Revision: 37278
 2013-07-14 11:26:35 +00:00
Felix Fietkau
299c2ceafa mac80211: tweak mac address allocation 
Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37269
 2013-07-13 11:39:48 +00:00
Felix Fietkau
92961e0917 mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37265
 2013-07-12 08:10:19 +00:00
Felix Fietkau
f8543faec4 mac80211: merge a fix for PS-Poll handling, refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37264
 2013-07-12 07:59:59 +00:00
Felix Fietkau
e389c2b410 mac80211: remove bogus module params from compat.ko 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37263
 2013-07-12 07:59:51 +00:00
Felix Fietkau
bec39b26ad kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37256
 2013-07-11 20:56:30 +00:00
Felix Fietkau
c38b7b3913 kernel: make libsas depend on x86 
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37254
 2013-07-11 20:56:22 +00:00
Florian Fainelli
0e479250a6 kernel: package the HW random core module 
And update the crypto-hw-hifn-795x to use it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37231
 2013-07-10 19:42:48 +00:00
John Crispin
eba9b8a324 kernel: unbreal of_i2c selection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37201
 2013-07-08 09:01:52 +00:00
John Crispin
fc40051569 lantiq: move dsl tools to package/network/config 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37198
 2013-07-08 09:01:38 +00:00
Luka Perkov
8fdf418c96 ltq-hcd: remove prebuilt module 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37190
 2013-07-08 00:37:50 +00:00
John Crispin
a1734998ee kernel: fix 8250 ko name for 3.9 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37164
 2013-07-04 13:31:28 +00:00
John Crispin
cb179cb262 mac80211: make rt2x00_soc depend on !rt3883 
https://dev.openwrt.org/ticket/13777

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37162
 2013-07-04 13:31:18 +00:00
John Crispin
e15a16bfd7 button-hotplug: Add KEY_POWER handling 
When running OpenWrt within KVM KEY_POWER is generated from the ACPI
button driver when restarting or powering down the VM.

Extend button-hotplug to allow user space handlers for these events.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/3799/

SVN-Revision: 37160
 2013-07-04 13:31:09 +00:00
Luka Perkov
6988613f7a gpio-button-hotplug: add support for EV_SW 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37130
 2013-07-02 10:45:31 +00:00
Felix Fietkau
16079fbd9a rt2x00: fix rf id override for RT5350 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37109
 2013-06-30 17:54:20 +00:00
Felix Fietkau
2d8990256c mac80211: use a new tarball with updated backport code 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37105
 2013-06-30 14:49:14 +00:00
Felix Fietkau
12c033dfd9 mac80211: update to wireless-testing 2013-06-27, fix ATH_USER_REGD handling 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37097
 2013-06-30 10:44:19 +00:00
Felix Fietkau
0f6e9c9fcc gpio-button-hotplug: improve gpio button debouncing, verify state changes over multiple polls. fixes spurious failsafe triggers (#13784) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37090
 2013-06-29 19:01:49 +00:00
Felix Fietkau
ae6fc0e4bd ath9k: fix tx queue pending frame counter when dropping packets 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37081
 2013-06-29 12:38:15 +00:00
Felix Fietkau
78ac19be04 mac80211: fix cck rate sampling in minstrel_ht 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37078
 2013-06-28 19:14:54 +00:00
John Crispin
1761b7b370 mac80211: disable rt2x00 on mt7620a 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37037
 2013-06-27 07:25:13 +00:00
Felix Fietkau
0f003be010 ath9k: fix a minor rcu issue 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37013
 2013-06-22 13:59:55 +00:00
John Crispin
fdb8d23745 mac80211: fix compile error on rt2x00 when buildin for SoC 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37008
 2013-06-21 16:54:46 +00:00
John Crispin
4ebf19b48f packages: clean up the package folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007
 2013-06-21 16:54:37 +00:00
Hauke Mehrtens
4e0c649783 kernel: add dependencies for kernel 3.10 
SVN-Revision: 36925
 2013-06-12 13:59:34 +00:00
John Crispin
dff1529d2a modules: make all led and button modules used during boot priority 1 
This makes sure the modules are symlinked in /etc/modules-boot.d/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36892
 2013-06-10 08:24:25 +00:00
Nicolas Thill
eed8141976 kmod-usb-net-cdc-mbim: fix module loading 
cdc_mbim should be loaded after cdc_ncm (closes: #13562)

SVN-Revision: 36856
 2013-06-05 14:34:50 +00:00
Imre Kaloz
8170c9cfb0 add some more symbols 
SVN-Revision: 36834
 2013-06-04 11:23:27 +00:00
Jonas Gorski
87203c4049 kernel: adapt module paths for 3.10-rc1 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36662
 2013-05-19 18:36:09 +00:00
Jonas Gorski
dc00dbd085 kernel: modules: kmod-fs-isofs depends on kmod-lib-zlib 
Add missing dependency. Fixes #11624.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36593
 2013-05-09 20:50:10 +00:00
Luka Perkov
826b4e36c4 kernel: add veth module 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36540
 2013-05-03 15:16:50 +00:00
Jo-Philipp Wich
7f2743d458 kernel: netfilter.mk: Explicitly set the order of autoloaded modules 
In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.

So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.

Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>

SVN-Revision: 36512
 2013-05-02 11:25:18 +00:00
Jo-Philipp Wich
af30e5e6bb Enable hidraw support. 
It's needed for dealing with certain UART-to-USB adapters built into
e.g. weather stations, and increases the hid module package only
slightly (e.g. on ar71xx: 35k -> 37k).

Signed-off-by: Danny Baumann <dannybaumann@web.de>

SVN-Revision: 36415
 2013-04-24 09:49:09 +00:00
Jo-Philipp Wich
2cea3d3949 Add kernel module package for hid-generic driver. 
Needed to support e.g. keyboards and mice.

Signed-off-by: Danny Baumann <dannybaumann@web.de>

SVN-Revision: 36414
 2013-04-24 09:49:03 +00:00
Jonas Gorski
49799d344d kernel: add kmod-mcp23s08 package 
Package up the Microchip MCP23S08 I/O expander driver. Needed on the
CalAmp LMU5000 board.

Signed-off-by: Adam Porter <porter.adam@gmail.com>
[jogo@openwrt.org: fix subject]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36393
 2013-04-23 09:21:55 +00:00
Gabor Juhos
38b4865a68 package/kernel: only include i2c-of if CONFIG_OF enabled 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36227
 2013-04-06 16:55:25 +00:00
Gabor Juhos
bf57f33f02 kernel: Allow talitos crypto hw module selection 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36224
 2013-04-06 12:41:06 +00:00
John Crispin
1c8d2aec18 unbreak i2c-mv64xxx dependencies 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36192
 2013-04-03 12:58:06 +00:00
John Crispin
8baf097b84 fix borken of-i2c dependencies 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36191
 2013-04-03 12:51:12 +00:00
John Crispin
30ee3ef24e add cdc-mbim module 
http://patchwork.openwrt.org/patch/3370/

Signed-off-by: Rusink Rusinkoff <rzrusink@gmail.com>

SVN-Revision: 36184
 2013-04-03 10:00:55 +00:00
John Crispin
219313833a Add INA2XX current sensor module. 
This is a I2C current/voltage/power sensor.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36182
 2013-04-03 10:00:44 +00:00