mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
12,981 Commits 3 Branches 0 Tags 517 MiB
afb9aa89b6
Commit Graph

135 Commits

Author SHA1 Message Date
Felix Fietkau
46f75ee869 add WRT300N v1.1 support (patch from #6379) 
SVN-Revision: 18921
 2009-12-24 10:58:09 +00:00
Jo-Philipp Wich
d55e721178 fix typo in switch config migration script 
SVN-Revision: 18657
 2009-12-05 12:39:28 +00:00
Jo-Philipp Wich
a4b1848387 add migration code to automatically convert old to new switch config on first boot, this will be removed at some point in the future 
SVN-Revision: 18432
 2009-11-15 23:19:39 +00:00
Jo-Philipp Wich
194f32bc26 change switch config to swconfig style format to remain consistent accross platforms 
SVN-Revision: 18425
 2009-11-15 18:43:46 +00:00
Hauke Mehrtens
30f859403a fix problem with 128MB ram. 
This patch is out of broadcoms official source code

SVN-Revision: 18413
 2009-11-13 20:32:47 +00:00
Imre Kaloz
ef42fb4c13 sort all target config files 
SVN-Revision: 18367
 2009-11-11 09:27:13 +00:00
Andy Boyett
260aee67dc fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich 
SVN-Revision: 18253
 2009-11-01 01:09:56 +00:00
John Crispin
2d57b56bce make etehrent work on wrt350n, thx sn9 
SVN-Revision: 18214
 2009-10-29 21:26:36 +00:00
Felix Fietkau
43a802864a Fix Buffalo WBR-G54 and WBR-B11 support (updated patch) 
Signed-off-by: Roger Hardiman <roger@rjh.org.uk>

SVN-Revision: 17598
 2009-09-16 18:14:29 +00:00
Imre Kaloz
3d0c1254df brcm-2.4 is the only non-2.6 target, it's pointless to note the kernelversion in other targets' Target-Name 
SVN-Revision: 17102
 2009-08-03 11:44:28 +00:00
Florian Fainelli
09e06acbec update profile to include the rtc driver 
SVN-Revision: 17074
 2009-08-01 11:10:02 +00:00
Florian Fainelli
31fbb89034 add support for the WRT160N, patch from Westley Paynter 
SVN-Revision: 17031
 2009-07-27 13:00:23 +00:00
Hauke Mehrtens
8d5a0d9721 This patch adds some vital exports for fuse24 to the kernel. (forgotten in #5186) Closes #5333 
SVN-Revision: 16448
 2009-06-14 11:36:58 +00:00
Florian Fainelli
cec852c087 update to 2.4.37, tested on wrt54gs (#4766) 
SVN-Revision: 16144
 2009-05-28 15:55:54 +00:00
Felix Fietkau
c3fb9f9226 brcm-2.4: disable ip_vs, refresh kernel config 
SVN-Revision: 16139
 2009-05-28 15:41:23 +00:00
Andy Boyett
d10e83e07c profiles: madwifi is not supported on 2.4, remove atheros profile 
SVN-Revision: 15944
 2009-05-20 21:10:15 +00:00
Felix Fietkau
4c406b52a2 brcm-2.4: rip out all /dev/nvram and nvram setting/committing code from the kernel 
SVN-Revision: 15440
 2009-04-27 14:51:26 +00:00
Felix Fietkau
34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;) 
SVN-Revision: 15242
 2009-04-17 14:09:46 +00:00
Felix Fietkau
de0332f86a rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway 
SVN-Revision: 15097
 2009-04-04 09:35:55 +00:00
Florian Fainelli
fc432e4371 move the mii_ioctl to generic patches, fixes (#1802) 
SVN-Revision: 15045
 2009-03-26 09:28:24 +00:00
Florian Fainelli
beb4eae1fa backport mii_ioctl_data fix to make wpa-supplicant roboswitch driver work (#1862) 
SVN-Revision: 14891
 2009-03-15 16:40:42 +00:00
Felix Fietkau
f5fba5bc3c Asus WL-330gE Support 
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.

Signed-off-by: David Cooper <dave@kupesoft.com>

SVN-Revision: 14624
 2009-02-22 18:45:39 +00:00
Felix Fietkau
f57651b042 fix a memory corruption bug in the linux 2.4 version of b44 
SVN-Revision: 13955
 2009-01-10 00:55:38 +00:00
Felix Fietkau
4f5b45e3c2 b44: fix misalignment and space-saving in rx packet handling (significant throughput and cpu load improvement) 
SVN-Revision: 13946
 2009-01-09 03:06:37 +00:00
Felix Fietkau
59a00d52a9 make broadcom-wl robust against implicit kernel config changes (e.g. netfilter), upgrade it from minor version .2 to .3 (adds fixed bssid support for ad-hoc) 
SVN-Revision: 13912
 2009-01-07 04:26:14 +00:00
Andy Boyett
9f8c82da09 Add hostapd-mini to default images where applicable 
SVN-Revision: 13819
 2009-01-02 05:12:46 +00:00
Felix Fietkau
f47a4a58c5 fix sysupgrade support for brcm-2.4 and brcm47xx make mtd refresh based config append optional (leave enabled on x86) 
SVN-Revision: 12657
 2008-09-23 11:05:54 +00:00
Imre Kaloz
88041e0f1b final fix for BCM5354 USB cores, hopefully 
SVN-Revision: 12499
 2008-09-02 11:28:57 +00:00
Florian Fainelli
5cf0db54c6 Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760) 
SVN-Revision: 12276
 2008-08-11 06:38:48 +00:00
Gabor Juhos
9b2e1bdd8d fix Dell TrueMobile 2300 v1/v2 detection and network configuration (closes #2788) 
SVN-Revision: 11935
 2008-07-26 16:10:44 +00:00
Travis Kemen
4e9e2cba40 fix sierra patches 
SVN-Revision: 11909
 2008-07-22 15:16:43 +00:00
Travis Kemen
8894411b60 This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz, re-based against 2.4.35 and repaired for obvious breakage (didn't use its device table, etc.). 
Changes from Linksys tree:
 - Remove 'vendor' and 'product' parameters; these aren't used in the
mainstream driver and seem to only have served to break it.
 - Remove bogus 'sierra_device_ids' table, used with above.
 - Changed references to 'sierra_device_ids' back to id_table
 - Changed non-standard CONFIG_USB_SERIAL_SIERRA_3G (line 886) to
current module standard CONFIG_USB_SERIAL_SIERRAWIRELESS
 - Added #include to enable pl2303 hack to remain until I can figure
out if it's still necessary.
Signed-off-by:  RB <aoz.syn@gmail.com>

SVN-Revision: 11899
 2008-07-21 20:40:14 +00:00
Travis Kemen
1a47f8142d This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com> 
SVN-Revision: 11898
 2008-07-21 20:36:16 +00:00
Felix Fietkau
20937ce81a (5/6) bcm57xx: bcm4785 incomplete reboot 
I noticed my wrt350n would not reliably reboot after entering
the reboot command.  I found this code in the source for the
wrt600n.  It corrects the problem, and the wrt350n reboots
reliably now.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11470
 2008-06-15 11:10:43 +00:00
Felix Fietkau
9621d872ca (3/6) bcm57xx: preinit 
This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately.  This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11468
 2008-06-15 11:10:13 +00:00
Felix Fietkau
f9ad520e37 (2/6) bcm57xx: netconfig 
Update the netconfig script to support boardtype 0x478.  I've tested this
on the wrt350n, hopefully it will match the 600n as well.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11467
 2008-06-15 11:09:49 +00:00
Peter Denison
473d5705bd Include missing part of r11275. Fix fw_argX from CFE 
SVN-Revision: 11340
 2008-06-03 19:29:53 +00:00
Peter Denison
c9f6d43927 Don't nuke fw_argX from CFE - Thanks jhansen 
SVN-Revision: 11275
 2008-05-27 15:01:07 +00:00
Gabor Juhos
8932b397b8 refresh kernel patches 
SVN-Revision: 11214
 2008-05-19 13:45:06 +00:00
Travis Kemen
0d25337129 This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben Pfountz <netprince@vt.edu> 
SVN-Revision: 11070
 2008-05-08 01:30:14 +00:00
Andy Boyett
0ed1824fa1 Add a generic Broadcom USB profile. 
SVN-Revision: 10695
 2008-03-31 08:05:30 +00:00
Andy Boyett
a2ccc5b790 Change WL500gP profile to use uhci-iv (#1589) 
SVN-Revision: 10694
 2008-03-31 08:05:13 +00:00
Andy Boyett
c15de3860c Add support for the WL-500gP v2 
SVN-Revision: 10693
 2008-03-31 08:04:56 +00:00
Felix Fietkau
85a1127f2d add wrt350n image file 
SVN-Revision: 10205
 2008-01-16 03:39:59 +00:00
Florian Fainelli
a4ca693c7e Add back Sitecom WL-105b support 
SVN-Revision: 10142
 2008-01-08 14:27:48 +00:00
Felix Fietkau
178721f76b update brcm-2.4 to 2.4.35.4, integrate new broadcom system code, update broadcom-wl to a contributed version (v4.150.10.5) - no bcm57xx support yet, will follow shortly 
SVN-Revision: 10137
 2008-01-06 19:28:07 +00:00
Imre Kaloz
f031f4c7dc bump version numbers of Linksys images 
SVN-Revision: 10097
 2008-01-03 21:28:56 +00:00
Florian Fainelli
dc36fccfdc Add bcm5354 patch from #2754 
SVN-Revision: 9684
 2007-12-09 15:51:45 +00:00
Felix Fietkau
bf0dd24627 create broadcom initramfs images and move the lzma decompressor area a bit further 
SVN-Revision: 9556
 2007-11-16 03:11:17 +00:00
Felix Fietkau
1bca0cc517 make the image filenames a bit shorter 
SVN-Revision: 9533
 2007-11-10 23:08:11 +00:00