mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
24,949 Commits 3 Branches 0 Tags 517 MiB
f43b4ea962
Commit Graph

226 Commits

Author SHA1 Message Date
Gabor Juhos
9579bb4267 ar71xx: ag71xx: remove MII interface setup code 
SVN-Revision: 29011
 2011-11-13 11:26:56 +00:00
Gabor Juhos
2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
SVN-Revision: 28977
 2011-11-12 10:54:16 +00:00
Felix Fietkau
7a2efd8c28 ar71xx: remove dead code 
SVN-Revision: 28851
 2011-11-08 00:33:20 +00:00
Felix Fietkau
94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
SVN-Revision: 28850
 2011-11-08 00:33:15 +00:00
Jonas Gorski
c674c874b7 ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
 2011-10-08 11:37:14 +00:00
Felix Fietkau
1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
SVN-Revision: 28213
 2011-09-11 17:44:12 +00:00
Felix Fietkau
12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240 
SVN-Revision: 27975
 2011-08-13 22:30:14 +00:00
Felix Fietkau
85ccc74e1b ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
SVN-Revision: 27973
 2011-08-13 21:49:46 +00:00
Felix Fietkau
4b75394056 ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

SVN-Revision: 27896
 2011-08-04 17:36:31 +00:00
Felix Fietkau
d2aeca6b6d ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

SVN-Revision: 27895
 2011-08-04 17:36:27 +00:00
Felix Fietkau
500c3a1475 ar71xx: fix MAC/MDIO reset mask handling 
SVN-Revision: 27894
 2011-08-04 17:36:23 +00:00
Felix Fietkau
c7173a211d ar71xx: reinitialize global switch settings after reset on ar7240 
SVN-Revision: 27705
 2011-07-20 14:39:47 +00:00
Felix Fietkau
ca473833c4 ar71xx: configure address aging on ar7240 
SVN-Revision: 27704
 2011-07-20 14:39:42 +00:00
Felix Fietkau
fefc79f3cb ar71xx: reset the phy in the ethernet init on ar724x 
SVN-Revision: 27703
 2011-07-20 12:04:34 +00:00
Felix Fietkau
005fe5d1fd ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset 
SVN-Revision: 27702
 2011-07-20 12:04:29 +00:00
Felix Fietkau
e7ab000008 ar71xx: increase the delay after the ethernet MAC reset 
SVN-Revision: 27701
 2011-07-20 12:04:25 +00:00
Felix Fietkau
255dcaa3a6 ar71xx: fix an unused variable warning 
SVN-Revision: 27700
 2011-07-20 12:04:20 +00:00
Felix Fietkau
f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state 
SVN-Revision: 27568
 2011-07-09 06:30:13 +00:00
Felix Fietkau
2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405 
SVN-Revision: 27567
 2011-07-09 06:29:46 +00:00
Felix Fietkau
31dd60689e Revert "ar71xx: only enable the rx engine after the link is up..." 
It messes up the DMA state when the link goes down

SVN-Revision: 27088
 2011-06-01 18:15:43 +00:00
Gabor Juhos
60d5abbc27 ar71xx: ag71xx: make ring sizes configurable via ethtool 
SVN-Revision: 27041
 2011-05-31 22:53:10 +00:00
Gabor Juhos
7a2651f633 ar71xx: ag71xx: prepare to make ring sizes configurable 
SVN-Revision: 27040
 2011-05-31 22:53:09 +00:00
Gabor Juhos
669aba3871 ar71xx: ag71xx: nuke unused AG71XX_TX_FIFO_LEN define 
Reported-by: Dave Täht <dave.taht@gmail.com>

SVN-Revision: 27039
 2011-05-31 22:53:07 +00:00
Felix Fietkau
2b5402d128 ar71xx: only enable the rx engine after the link is up, fixes a race condition that got rx stuck when the interface is brought up during lots of inbound traffic (thx, matteo) 
SVN-Revision: 27035
 2011-05-30 23:08:01 +00:00
Felix Fietkau
0ebc93831f ar71xx: disable flow control for ar724x, it can get stuck in a loop of continously sending MAC pause frames 
SVN-Revision: 27034
 2011-05-30 23:07:57 +00:00
Matteo Croce
4deecea26b ar71xx: detect link on LAN ports 
SVN-Revision: 26922
 2011-05-17 11:12:56 +00:00
Matteo Croce
c0c2e18452 use correct macros and frame size in ag71xx 
SVN-Revision: 26890
 2011-05-14 23:10:06 +00:00
Gabor Juhos
5d77f370d6 ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

SVN-Revision: 26856
 2011-05-08 16:32:53 +00:00
Gabor Juhos
3711658281 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

SVN-Revision: 26855
 2011-05-08 13:30:36 +00:00
Gabor Juhos
ef53029870 ar71xx: ag71xx: fix build error if debugfs is enabled 
SVN-Revision: 26854
 2011-05-08 13:30:26 +00:00
Gabor Juhos
8b67d748cb ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
SVN-Revision: 26845
 2011-05-07 12:40:34 +00:00
Gabor Juhos
2166432ba0 ar71xx: ag71xx: add timestamps to ag71xx_buf 
SVN-Revision: 26844
 2011-05-07 12:40:28 +00:00
Gabor Juhos
896e1d1ab4 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
SVN-Revision: 26843
 2011-05-07 12:40:26 +00:00
Gabor Juhos
a6708d20d1 ar71xx: ag71xx: use debugfs_remove_recursive 
SVN-Revision: 26842
 2011-05-07 12:40:25 +00:00
Felix Fietkau
41ee4a283c ar71xx: only allow internal access to the ar7240 switch, export the MDIO bus behind the switch instead 
SVN-Revision: 26393
 2011-04-02 00:47:29 +00:00
Felix Fietkau
acbb3e50e7 ar71xx: frequent ethernet mac resets upset the MDIO bus on ar7240, so do not run them on every device open, only on tx timeouts 
SVN-Revision: 26392
 2011-04-02 00:47:25 +00:00
Gabor Juhos
3106aea40b ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOM 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23982
 2010-11-12 18:52:28 +00:00
Gabor Juhos
30ef7d55fc ar71xx: use pr_* functions in drivers 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23981
 2010-11-12 18:52:12 +00:00
Gabor Juhos
f4d5c885e4 ar71xx: return statements does not need parenthesis 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23979
 2010-11-12 18:51:38 +00:00
Gabor Juhos
e244e1c7cd ar71xx: fix inline attribute location 
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23978
 2010-11-12 18:51:21 +00:00
Gabor Juhos
acd8ad4de5 ar71xx: wrap long lines 
(build errors has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23977
 2010-11-12 18:51:04 +00:00
Gabor Juhos
500fac1735 ar71xx: fix whitespaces nits 
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23975
 2010-11-12 18:50:29 +00:00
Felix Fietkau
6656450c6d ar71xx: fix more section mismatches 
SVN-Revision: 23575
 2010-10-21 18:42:16 +00:00
Felix Fietkau
8858d90afe ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port patch to the 2.6.36 patches, add a backport patch to 2.6.32 
SVN-Revision: 23574
 2010-10-21 18:42:11 +00:00
Felix Fietkau
523fcf0497 ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 
SVN-Revision: 22675
 2010-08-16 19:21:57 +00:00
Felix Fietkau
a27ea45e76 ar71xx: only reinit the ethernet MAC at .open() on ar724x for now, until we've figured out what part of it causes the issue described in #7563 
SVN-Revision: 22075
 2010-07-06 12:40:07 +00:00
Felix Fietkau
15b209d09f ag71xx: reset the hardware during open(), this improves recovery from tx timeouts on ar724x considerably 
SVN-Revision: 22055
 2010-07-04 02:15:08 +00:00
Felix Fietkau
89da22d1ea ag71xx: fix a memory corruption bug that happens if you flood the interface with packets while it's being brought down fixes boot time crashes under load reported by matteo 
SVN-Revision: 22054
 2010-07-04 01:31:33 +00:00
Felix Fietkau
7966004d99 ag71xx: remove rx alignment code for small packets, it seems to break ipv6 for some reason (fixes #7236) 
SVN-Revision: 21166
 2010-04-26 16:39:13 +00:00
Felix Fietkau
1c0e751391 ar71xx: fix up alignment handling 
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned
- alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment
- ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets
- use memmove to re-align small packets, if necessary

tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers

SVN-Revision: 20892
 2010-04-15 23:31:17 +00:00
Gabor Juhos
4c29a2c263 ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive functions 
Cc: backfire@openwrt.org

SVN-Revision: 20751
 2010-04-09 08:40:06 +00:00
Gabor Juhos
4a28844d80 ar71xx: ag71xx: call the phy driver's netif_receive_skb() 
Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers
to mangle rx packets. This patch fixes it.

This fixes the header mangling of the AR8216 driver.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc:backfire@openwrt.org

SVN-Revision: 20750
 2010-04-09 08:38:46 +00:00
Gabor Juhos
c874513cfa ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024) 
* cc: backfire@openwrt.org

SVN-Revision: 20673
 2010-04-03 13:59:08 +00:00
Gabor Juhos
b7ca043240 ar71xx: ag71xx: copy received packet to avoid unaligned access in the IP stack 
SVN-Revision: 20506
 2010-03-27 13:05:27 +00:00
Gabor Juhos
f9acf8ada1 ar71xx: ag71xx: introduce ag71xx_has_ar8216() helper 
SVN-Revision: 20505
 2010-03-27 13:05:24 +00:00
Gabor Juhos
200db5ebb5 ar71xx: ag71xx: reorganize ag71xx_rx_packet function 
SVN-Revision: 20504
 2010-03-27 13:05:20 +00:00
Gabor Juhos
245775a49f ar71xx: ag71xx: Add netpoll support 
This patch adds support for polling interrupts, used by
netconsole and the likes.

Tested on d-link dir-615 C1 using netconsole.

Signed-off-by: Pat Erley <pat-lkml@erley.org>

SVN-Revision: 20503
 2010-03-27 13:05:17 +00:00
Andy Boyett
681054333e wrt400n: lan ports don't need the ar8216 workaround 
SVN-Revision: 20491
 2010-03-26 19:09:11 +00:00
Gabor Juhos
9a1031ce6d ar71xx: change PHY select logic, and update phy_masks 
SVN-Revision: 20358
 2010-03-21 18:16:07 +00:00
Gabor Juhos
2a818f388a ar71xx: ag71xx: fix MAC address setup 
SVN-Revision: 20092
 2010-03-09 18:05:36 +00:00
Gabor Juhos
2702ae4e8f ar71xx: ag71xx: move calling ag71xx_phy_stop out from spinlock 
SVN-Revision: 20004
 2010-03-05 20:29:22 +00:00
Gabor Juhos
a4bccded57 ar71xx: ag71xx: move link update function 
SVN-Revision: 20003
 2010-03-05 20:29:18 +00:00
Gabor Juhos
eacf9a7614 ar71xx: ag71xx: don't use dev->trans_start 
SVN-Revision: 20002
 2010-03-05 20:29:14 +00:00
Gabor Juhos
ba288eeb84 ar71xx: ag71xx: use dma_unmap_single to unmap frames 
SVN-Revision: 20001
 2010-03-05 20:29:10 +00:00
Gabor Juhos
0e4eaea770 ar71xx: ag71xx: use correct device pointer for dma_map_single 
SVN-Revision: 19951
 2010-03-02 13:36:18 +00:00
Gabor Juhos
84823e1477 ar71xx: ag71xx: don't use virt_to_phys 
SVN-Revision: 19950
 2010-03-02 13:36:15 +00:00
Gabor Juhos
4a987d6008 ar71xx: ag71xx: simplify register access functions 
SVN-Revision: 19949
 2010-03-02 13:36:12 +00:00
Gabor Juhos
e157281c5d ar71xx: ag71xx: use NETDEV_TX_OK 
SVN-Revision: 19948
 2010-03-02 13:36:09 +00:00
Gabor Juhos
1612fd447d ar71xx: enable TX/RX flow control on the AR7240 
SVN-Revision: 19832
 2010-02-24 13:38:41 +00:00
Gabor Juhos
49c4df5487 rtl8366: make it available on all platforms 
SVN-Revision: 19329
 2010-01-25 15:13:38 +00:00
Gabor Juhos
97b983c8b9 rtl8366s: simplify mib counters handling 
SVN-Revision: 19326
 2010-01-25 14:24:53 +00:00
Gabor Juhos
2b5ba9073f rtl8366_smi: move RTL8366S driver into a separate file 
SVN-Revision: 19279
 2010-01-22 17:38:07 +00:00
Gabor Juhos
46b0e6643a rtl8366_smi: rename rtl8366s specific functions and definitions 
SVN-Revision: 19278
 2010-01-22 17:37:58 +00:00
Gabor Juhos
08055fd6d1 rtl8366_smi: move chip specific stuff into its own struct 
SVN-Revision: 19277
 2010-01-22 17:37:53 +00:00
Gabor Juhos
de751af190 rtl8366_smi: separate gpio initialization 
SVN-Revision: 19276
 2010-01-22 17:37:50 +00:00
Gabor Juhos
a1247d2f83 rtl8366_smi: store GPIO numbers directly in the rtl8366_smi struct 
SVN-Revision: 19275
 2010-01-22 17:37:47 +00:00
Gabor Juhos
ab278275ee rtl8366_smi: store device pointer instead of plaform_device 
SVN-Revision: 19274
 2010-01-22 17:37:41 +00:00
Gabor Juhos
edfa82ab60 rtl8366_smi: rename switch attribute handlers 
SVN-Revision: 19254
 2010-01-21 12:13:43 +00:00
Gabor Juhos
7aefde9f66 rtl8366_smi: simplify rtl8366_attr_get_port_link function 
SVN-Revision: 19250
 2010-01-20 20:36:30 +00:00
Gabor Juhos
83fb9f73e1 rtl8366_smi: make rtl8366_phy_config_{aneg,init} static 
SVN-Revision: 19249
 2010-01-20 20:36:27 +00:00
Gabor Juhos
cad07a09c1 rtl8366_smi: simplify rtl8366_{get,set}_port_vlan_index functions 
SVN-Revision: 19248
 2010-01-20 20:36:24 +00:00
Gabor Juhos
50849c6cff rtl8366_smi: minor code optimalizations 
SVN-Revision: 19247
 2010-01-20 20:36:21 +00:00
Gabor Juhos
3e6b3ea088 rtl8366_smi: coding style cleanup 
SVN-Revision: 19246
 2010-01-20 17:40:39 +00:00
Gabor Juhos
5e5451a54d rtl8366_smi: add Kconfig option for the debugfs stuff 
SVN-Revision: 19243
 2010-01-20 09:30:36 +00:00
Gabor Juhos
0d48b043b1 rtl8366_smi: fix error checking in rtl8366s_set_vlan_4k_entry 
SVN-Revision: 19242
 2010-01-20 09:30:32 +00:00
Gabor Juhos
0296b24f80 rtl8366_smi: fix parameter checking in rtl8366_attr_get_vlan_info 
SVN-Revision: 19241
 2010-01-20 09:30:25 +00:00
Gabor Juhos
743e7617b0 rtl8366_smi: fix return codes in rtl8366s_reset_vlan 
SVN-Revision: 19240
 2010-01-20 07:06:18 +00:00
Gabor Juhos
43815d730b rtl8366_smi: move variable initialization out from the loop 
SVN-Revision: 19239
 2010-01-20 07:06:15 +00:00
Gabor Juhos
fbc389ae9d rtl8366_smi: fix port->flags calculation in rtl8366_get_ports 
SVN-Revision: 19237
 2010-01-20 07:06:10 +00:00
Gabor Juhos
c4838a0f9e rtl8366_smi: use inline function instead of a macro on top of container_of 
SVN-Revision: 19215
 2010-01-18 09:01:40 +00:00
Felix Fietkau
88ddc59655 rtl8366_smi: reset the vlan table when resetting the switch and use vlan get/set ports for vlan member lists 
SVN-Revision: 19206
 2010-01-18 00:12:12 +00:00
Felix Fietkau
b228fd428a rtl8366_smi: fix excessive stack usage and buffer handling bugs 
SVN-Revision: 19205
 2010-01-18 00:12:07 +00:00
Felix Fietkau
8394a32815 ar71xx: fix return statement in the rtl8366 driver 
SVN-Revision: 19204
 2010-01-17 22:57:08 +00:00
Gabor Juhos
d2229cb1cc rtl8366_smi: register the switch directly from the probe routine 
SVN-Revision: 19202
 2010-01-17 21:37:09 +00:00
Gabor Juhos
088ba7e1db rtl8366_smi: use vlanmc name for all vlanconfig variables 
SVN-Revision: 19201
 2010-01-17 21:17:59 +00:00
Gabor Juhos
639212697d rtl8366_smi: use vlan4k name for all vlan4kentry variables 
SVN-Revision: 19200
 2010-01-17 21:17:57 +00:00
Gabor Juhos
9cb11e2eef rtl8366_smi: move memset into the rtl8366s_get_member_config function 
SVN-Revision: 19199
 2010-01-17 21:17:53 +00:00
Gabor Juhos
f55beb9e9b rtl8366_smi: move memset into the rtl8366s_get_vlan_4k_entry function 
SVN-Revision: 19198
 2010-01-17 21:17:49 +00:00
Gabor Juhos
7f9b0eca90 rtl8366_smi: add vid parameter to the rtl8366s_get_vlan_4k_entry function 
SVN-Revision: 19197
 2010-01-17 21:17:46 +00:00
Gabor Juhos
a90792056c ar71xx: upgrade rtl8366_smi driver 
Thanks to Antti Seppälä.
Patch from https://forum.openwrt.org/viewtopic.php?pid=100150#p100150

SVN-Revision: 19196
 2010-01-17 21:17:42 +00:00