mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
21,371 Commits 3 Branches 0 Tags 517 MiB
febf63f3c4
Commit Graph

354 Commits

Author SHA1 Message Date
John Crispin
76954dc8b0 set xen images to gzip compression, fixes #11970 
SVN-Revision: 33192
 2012-08-15 09:20:12 +00:00
Jo-Philipp Wich
c8a0166212 Fix hard reset of alix/soekris hardware under heavy NIC load 
The following patch corrects a hard reset that occurs on alix and
soekris net5501 hardware. Specifically, this is an issue with the via
rhine NIC driver. Under periods of extreme load, the via rhine driver
can cause a reset of the entire system. When this happens no output is
seen on the console, the device simply reboots. This was reported in the
following ticket:

Consistent crash on Soekris NET5501
https://dev.openwrt.org/ticket/11882

I was able to reproduce the problem locally with numerous alix 2d13
platforms. Under heavy 64 byte frame size load from a Smartbits traffic
generator, the alix hardware will hard reset in under 5 minutes. The
same hardware, under the same load, on FreeBSD 9.0 does not reset.

The patch below backports most of the via rhine changes from kernel 3.5.
With OpenWrt trunk being on kernel 3.3.8, it seemed prudent to bring
these changes in to avoid this serious issue.

I've tested this heavily in my test environment and was able to keep the
device stable under load for extended periods of time without any resets.

Also, a nice side effect of this change is that it significantly raises
the performance the platform. Without this patch the alix 2d13 can move
approximately 29,000 packets per second at 64 byte frame sizes. After
this patch the alix can move 52,000 packets per second at 64 byte frame
sizes.

I put this patch under the x86 patches as those are the only platforms
with via rhine hardware that I'm aware of. If it needs to go some place
else please let me know.

Thanks,
Adam

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 33072
 2012-08-09 09:41:22 +00:00
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 
SVN-Revision: 32869
 2012-07-25 19:36:19 +00:00
Florian Fainelli
c3b9a987b7 move leds modules back to target modules.mk 
SVN-Revision: 32851
 2012-07-25 15:49:57 +00:00
Florian Fainelli
bca45d6d8a move i2c modules back to target modules.mk 
SVN-Revision: 32850
 2012-07-25 15:49:54 +00:00
Florian Fainelli
2bfb2a797c move more x86-specific modules back to target modules.mk 
SVN-Revision: 32848
 2012-07-25 15:49:49 +00:00
Florian Fainelli
d973768580 move x86 specific ide/pata modules to x86' modules.mk 
SVN-Revision: 32846
 2012-07-25 15:49:42 +00:00
Vasilis Tsiligiannis
1978c07539 Fix sysupgrade for squashfs, jffs2 and ext4 images 
* use 'fsync' with 'dd' for image writing
	* save config to boot partition

SVN-Revision: 32465
 2012-06-19 22:36:53 +00:00
Jo-Philipp Wich
f06473f8ff optimize kernel config for kvm_guest 
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 32436
 2012-06-18 23:36:50 +00:00
Jo-Philipp Wich
cbac321164 remove inittab override 
SVN-Revision: 32422
 2012-06-18 11:50:37 +00:00
Jo-Philipp Wich
e3663ff907 use ttyS0 @ 115200 baud as default for KVM guests 
SVN-Revision: 32384
 2012-06-15 12:59:49 +00:00
John Crispin
a4d96aae8d bump to 3.3.8 
SVN-Revision: 32055
 2012-06-05 06:57:51 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos
07b5a3eea2 x86: remove support for old kernels 
SVN-Revision: 31804
 2012-05-18 20:10:42 +00:00
Gabor Juhos
604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides 
SVN-Revision: 31803
 2012-05-18 20:10:38 +00:00
Gabor Juhos
d9dab97d38 x86/ep80579: switch to 3.3 
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
 2012-05-18 20:10:33 +00:00
Gabor Juhos
a5de52c244 x86/olpc: switch to 3.3 
Compile tested only.

SVN-Revision: 31784
 2012-05-18 09:57:32 +00:00
Gabor Juhos
9e54e012d6 x86: image: select bootscript images by default for OLPC 
SVN-Revision: 31783
 2012-05-18 09:57:29 +00:00
Gabor Juhos
562e468ae5 x86/thincan: switch to 3.3 
Compile tested only.

SVN-Revision: 31765
 2012-05-17 06:41:01 +00:00
Gabor Juhos
1f7f8376a6 x86/xen_domu: switch to 3.3 
Compile tested only.

SVN-Revision: 31764
 2012-05-17 06:41:00 +00:00
Gabor Juhos
8bb7ddecfd x86/kvm_guest: switch to 3.3 
Compile tested only.

SVN-Revision: 31763
 2012-05-17 06:40:58 +00:00
Gabor Juhos
f14d1a588d x86/generic: switch to 3.3 
Compile tested only.

SVN-Revision: 31762
 2012-05-17 06:40:56 +00:00
Gabor Juhos
eb2fe5e863 x86/alix2: switch to 3.3 
Compile tested only.

SVN-Revision: 31753
 2012-05-16 10:45:02 +00:00
Gabor Juhos
fb7da5bbde x86/net5501: switch to 3.3 
Compile tested only.

SVN-Revision: 31752
 2012-05-16 10:44:59 +00:00
Gabor Juhos
9e049ce25c x86: sync 3.3 configs 
SVN-Revision: 31751
 2012-05-16 10:44:55 +00:00
Gabor Juhos
19f691f8e4 x86: sync 3.2 configs 
SVN-Revision: 31750
 2012-05-16 10:44:52 +00:00
Gabor Juhos
724fd5e657 x86: sync 2.6.39 configs 
SVN-Revision: 31749
 2012-05-16 10:44:49 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5 
SVN-Revision: 31645
 2012-05-07 20:11:43 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4 
SVN-Revision: 31541
 2012-04-30 08:38:11 +00:00
Jonas Gorski
8fd383ae2e kernel: update linux 3.3 to 3.3.3 
SVN-Revision: 31460
 2012-04-24 09:25:38 +00:00
Jonas Gorski
22b4e6b882 kernel: update linux 3.2 to 3.2.16 
SVN-Revision: 31459
 2012-04-24 09:25:35 +00:00
Gabor Juhos
4b6833b176 x86: restore config-default, it is needed for 2.6.39 
Reported-by: Thomas Heil <heil@terminal-consulting.de>

SVN-Revision: 31452
 2012-04-23 16:56:08 +00:00
Gabor Juhos
f63d216467 x86: remove 2.6.32 support 
SVN-Revision: 31415
 2012-04-21 16:17:48 +00:00
Jonas Gorski
d0bfc67e2e kernel: x86: also update subtarget kernel versions 
SVN-Revision: 31338
 2012-04-17 21:01:43 +00:00
Jo-Philipp Wich
a0f0213462 bump to Linux v3.3.1 
SVN-Revision: 31314
 2012-04-16 15:04:47 +00:00
Jo-Philipp Wich
4b230e19fc PATCH: Disable console terminal in Grub for alix2 target 
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 31270
 2012-04-12 23:30:27 +00:00
Jo-Philipp Wich
fcfdbd4961 add missing Kernel symbol spotted by buildbot 
SVN-Revision: 31232
 2012-04-10 10:09:27 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14 
SVN-Revision: 31222
 2012-04-09 14:48:51 +00:00
Florian Fainelli
60e195d399 geos: add 'tc' and kmod-sched for bonding 
The Geos2 includes 2 ADSL+ interfaces, and as such it needs to have the TEQL scheduler for bonding.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 31094
 2012-03-27 17:47:37 +00:00
Jens Muecke
1d2b19c4bf Disable keyboard for x86 default config - revoke patch 30966 
This was already fixed by commit 30309 and is part of generic x86 target.

SVN-Revision: 31052
 2012-03-21 19:10:02 +00:00
Jo-Philipp Wich
884f964e62 alix2: add require crypto kmods (#10410) 
SVN-Revision: 30980
 2012-03-18 18:56:02 +00:00
Jens Muecke
deac1c16a1 Enable keyboard for x86 
This is required for qemu like descripted in
here http://wiki.openwrt.org/doc/howto/qemu

SVN-Revision: 30966
 2012-03-17 21:32:08 +00:00
Jo-Philipp Wich
bafdae9233 enable RTC_CLASS for Linux 3.2 and 3.3 
SVN-Revision: 30717
 2012-02-25 13:06:26 +00:00
Jo-Philipp Wich
74db55a982 config: deprecated symbol CONFIG_LEDS_GPIO_PLATFORM 
CONFIG_LEDS_GPIO_PLATFORM went away a while ago.

http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commit;h=2bcc7ed5b83b0a59c6976476e8788675038fb11b

Also, most platforms comment out CONFIG_LEDS_GPIO but not x86 for some reason.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30708
 2012-02-24 10:35:20 +00:00
Vasilis Tsiligiannis
eed8e2a4fd Disable by default padding of images 
SVN-Revision: 30590
 2012-02-16 17:54:07 +00:00
Vasilis Tsiligiannis
8676e49d9d Allow gzipping of squashfs images with padded jffs2 partition 
SVN-Revision: 30589
 2012-02-16 17:54:04 +00:00
Vasilis Tsiligiannis
ab09db09fc GZip only ext4 and padded images 
SVN-Revision: 30588
 2012-02-16 17:54:01 +00:00
Vasilis Tsiligiannis
b4f51343c6 Make gzipping of images configurable via menuconfig 
SVN-Revision: 30587
 2012-02-16 17:53:57 +00:00