mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
36,717 Commits 3 Branches 0 Tags 517 MiB
C 90.8%
Makefile 4.4%
Shell 1.6%
Roff 1.5%
Perl 0.6%
Other 1%
01dda0659e
Go to file
Piotr Dymacz 01dda0659e ar71xx: add support for YunCore AP90Q 
YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2.
Short specification:

- 650/600/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, passive PoE support
- 64/128 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz with external PA, up to 29 dBm
- 2x internal 5 dBi omni antennas
- 4x LED, 1x button
- UART (JP1) header on PCB

Flash instruction under U-Boot, using UART:

1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset

Flash instruction under vendor fimrware, using telnet/SSH:

1. Connect PC with 192.168.1.x address to WAN port
2. Power up device, enter failsafe mode with button (no LED indicator!)
3. Change root password and reboot (mount_root, passwd ..., reboot -f)
4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP
5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
6. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9f050000"
- mtd erase firmware
- mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
.github Add Issue submission template (redirect to bugs.lede-project.org) 2016-09-01 09:01:04 -04:00
config x86: bump default kernel partition size to 16M 2016-11-09 12:17:52 +01:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include build: add support code for appending metadata to images 2016-11-19 11:24:10 +01:00
package base-files: validate metadata of sysupgrade images 2016-11-19 11:24:09 +01:00
scripts scripts/feeds: use git rev-parse for getting revision 2016-11-08 11:17:11 +01:00
target ar71xx: add support for YunCore AP90Q 2016-11-21 10:05:40 +01:00
toolchain toolchain: fix MIPS softfloat build issue for gcc-5.4.0 2016-11-14 09:37:15 +01:00
tools firmware-utils: tplink-safeloader: keep per-device info on trailing char 2016-11-20 17:17:48 +01:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in branding: add LEDE branding 2016-03-24 22:40:13 +01:00
feeds.conf.default feeds: switch from github to lede-project.org mirrors 2016-08-01 22:34:18 +02:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: move merged package directory from bin/ to staging_dir 2016-08-03 12:22:18 +02:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk rules.mk: add STAGING_DIR_HOSTPKG variable 2016-11-01 12:11:14 +01:00

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org