b3fdd931d1
This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 29910
35 lines
1.5 KiB
Makefile
35 lines
1.5 KiB
Makefile
#
|
|
# Makefile for the Ralink RT305x SoC specific parts of the kernel
|
|
#
|
|
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
|
|
#
|
|
# This program is free software; you can redistribute it and/or modify it
|
|
# under the terms of the GNU General Public License version 2 as published
|
|
# by the Free Software Foundation.
|
|
|
|
obj-y := irq.o setup.o devices.o rt305x.o clock.o
|
|
|
|
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
|
|
|
obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
|
|
obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o
|
|
obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o
|
|
obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
|
|
obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o
|
|
obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o
|
|
obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o
|
|
obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o
|
|
obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o
|
|
obj-$(CONFIG_RT305X_MACH_NBG_419N) += mach-nbg-419n.o
|
|
obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
|
|
obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o
|
|
obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
|
|
obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
|
|
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
|
|
obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o
|
|
obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o
|
|
obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o
|
|
obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o
|
|
obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o
|
|
obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o
|