dee4e713e9
Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx * GW552x * GW551x Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48008
315 lines
8.9 KiB
Diff
315 lines
8.9 KiB
Diff
From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
|
|
From: Tim Harvey <tharvey@gateworks.com>
|
|
Date: Thu, 15 May 2014 12:36:23 -0700
|
|
Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy
|
|
|
|
If an i210 is configured for 1000BASE-BX link_mode and has an external phy
|
|
specified, then register an mii bus using the external phy address as
|
|
a mask.
|
|
|
|
An i210 hooked to an external standard phy will be configured with a link_mo
|
|
of SGMII in which case phy ops will be configured and used internall in the
|
|
igb driver for link status. However, in certain cases one might be using a
|
|
backplane SerDes connection to something that talks on the mdio bus but is
|
|
not a standard phy, such as a switch. In this case by registering an mdio
|
|
bus a phy driver can manage the device.
|
|
|
|
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
---
|
|
drivers/net/ethernet/intel/igb/e1000_82575.c | 15 +++
|
|
drivers/net/ethernet/intel/igb/e1000_hw.h | 7 ++
|
|
drivers/net/ethernet/intel/igb/igb_main.c | 168 ++++++++++++++++++++++++++-
|
|
3 files changed, 185 insertions(+), 5 deletions(-)
|
|
|
|
Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c
|
|
===================================================================
|
|
--- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_82575.c 2015-12-18 10:39:44.935158318 -0800
|
|
+++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_82575.c 2015-12-18 10:39:44.943158318 -0800
|
|
@@ -612,13 +612,25 @@
|
|
switch (link_mode) {
|
|
case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
|
|
hw->phy.media_type = e1000_media_type_internal_serdes;
|
|
+ if (igb_sgmii_uses_mdio_82575(hw)) {
|
|
+ u32 mdicnfg = rd32(E1000_MDICNFG);
|
|
+ mdicnfg &= E1000_MDICNFG_PHY_MASK;
|
|
+ hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
|
|
+ hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
|
|
+ hw->phy.addr);
|
|
+ } else {
|
|
+ hw_dbg("1000BASE_KX");
|
|
+ }
|
|
break;
|
|
case E1000_CTRL_EXT_LINK_MODE_SGMII:
|
|
/* Get phy control interface type set (MDIO vs. I2C)*/
|
|
if (igb_sgmii_uses_mdio_82575(hw)) {
|
|
hw->phy.media_type = e1000_media_type_copper;
|
|
dev_spec->sgmii_active = true;
|
|
+ hw_dbg("SGMII with external MDIO PHY");
|
|
break;
|
|
+ } else {
|
|
+ hw_dbg("SGMII with external I2C PHY");
|
|
}
|
|
/* fall through for I2C based SGMII */
|
|
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
|
|
@@ -635,8 +647,11 @@
|
|
hw->phy.media_type = e1000_media_type_copper;
|
|
dev_spec->sgmii_active = true;
|
|
}
|
|
+ hw_dbg("SERDES with external SFP");
|
|
|
|
break;
|
|
+ } else {
|
|
+ hw_dbg("SERDES");
|
|
}
|
|
|
|
/* do not change link mode for 100BaseFX */
|
|
Index: linux-4.3/drivers/net/ethernet/intel/igb/e1000_hw.h
|
|
===================================================================
|
|
--- linux-4.3.orig/drivers/net/ethernet/intel/igb/e1000_hw.h 2015-11-01 16:05:25.000000000 -0800
|
|
+++ linux-4.3/drivers/net/ethernet/intel/igb/e1000_hw.h 2015-12-18 10:39:44.943158318 -0800
|
|
@@ -27,6 +27,7 @@
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/netdevice.h>
|
|
+#include <linux/phy.h>
|
|
|
|
#include "e1000_regs.h"
|
|
#include "e1000_defines.h"
|
|
@@ -543,6 +544,12 @@
|
|
struct e1000_mbx_info mbx;
|
|
struct e1000_host_mng_dhcp_cookie mng_cookie;
|
|
|
|
+#ifdef CONFIG_PHYLIB
|
|
+ /* Phylib and MDIO interface */
|
|
+ struct mii_bus *mii_bus;
|
|
+ struct phy_device *phy_dev;
|
|
+ phy_interface_t phy_interface;
|
|
+#endif
|
|
union {
|
|
struct e1000_dev_spec_82575 _82575;
|
|
} dev_spec;
|
|
Index: linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c
|
|
===================================================================
|
|
--- linux-4.3.orig/drivers/net/ethernet/intel/igb/igb_main.c 2015-12-18 10:39:44.407158315 -0800
|
|
+++ linux-4.3/drivers/net/ethernet/intel/igb/igb_main.c 2015-12-18 10:39:44.943158318 -0800
|
|
@@ -41,6 +41,7 @@
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci-aspm.h>
|
|
+#include <linux/phy.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ip.h>
|
|
@@ -2223,6 +2224,126 @@
|
|
return status;
|
|
}
|
|
|
|
+
|
|
+#ifdef CONFIG_PHYLIB
|
|
+/*
|
|
+ * MMIO/PHYdev support
|
|
+ */
|
|
+
|
|
+static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
|
|
+{
|
|
+ struct e1000_hw *hw = bus->priv;
|
|
+ u16 out;
|
|
+ int err;
|
|
+
|
|
+ err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
|
|
+ if (err)
|
|
+ return err;
|
|
+ return out;
|
|
+}
|
|
+
|
|
+static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
|
|
+ u16 val)
|
|
+{
|
|
+ struct e1000_hw *hw = bus->priv;
|
|
+
|
|
+ return igb_write_reg_gs40g(hw, mii_id, regnum, val);
|
|
+}
|
|
+
|
|
+static int igb_enet_mdio_reset(struct mii_bus *bus)
|
|
+{
|
|
+ udelay(300);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void igb_enet_mii_link(struct net_device *netdev)
|
|
+{
|
|
+}
|
|
+
|
|
+/* Probe the mdio bus for phys and connect them */
|
|
+static int igb_enet_mii_probe(struct net_device *netdev)
|
|
+{
|
|
+ struct igb_adapter *adapter = netdev_priv(netdev);
|
|
+ struct e1000_hw *hw = &adapter->hw;
|
|
+ struct phy_device *phy_dev = NULL;
|
|
+ int phy_id;
|
|
+
|
|
+ /* check for attached phy */
|
|
+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
|
|
+ if (hw->mii_bus->phy_map[phy_id]) {
|
|
+ phy_dev = hw->mii_bus->phy_map[phy_id];
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+ if (!phy_dev) {
|
|
+ netdev_err(netdev, "no PHY found\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
|
|
+ phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
|
|
+ igb_enet_mii_link, hw->phy_interface);
|
|
+ if (IS_ERR(phy_dev)) {
|
|
+ netdev_err(netdev, "could not attach to PHY\n");
|
|
+ return PTR_ERR(phy_dev);
|
|
+ }
|
|
+
|
|
+ hw->phy_dev = phy_dev;
|
|
+ netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
|
|
+ hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* Create and register mdio bus */
|
|
+static int igb_enet_mii_init(struct pci_dev *pdev)
|
|
+{
|
|
+ struct mii_bus *mii_bus;
|
|
+ struct net_device *netdev = pci_get_drvdata(pdev);
|
|
+ struct igb_adapter *adapter = netdev_priv(netdev);
|
|
+ struct e1000_hw *hw = &adapter->hw;
|
|
+ int err;
|
|
+
|
|
+ mii_bus = mdiobus_alloc();
|
|
+ if (mii_bus == NULL) {
|
|
+ err = -ENOMEM;
|
|
+ goto err_out;
|
|
+ }
|
|
+
|
|
+ mii_bus->name = "igb_enet_mii_bus";
|
|
+ mii_bus->read = igb_enet_mdio_read;
|
|
+ mii_bus->write = igb_enet_mdio_write;
|
|
+ mii_bus->reset = igb_enet_mdio_reset;
|
|
+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
|
|
+ pci_name(pdev), hw->device_id + 1);
|
|
+ mii_bus->priv = hw;
|
|
+ mii_bus->parent = &pdev->dev;
|
|
+ mii_bus->phy_mask = ~(1 << hw->phy.addr);
|
|
+
|
|
+ err = mdiobus_register(mii_bus);
|
|
+ if (err) {
|
|
+ printk(KERN_ERR "failed to register mii_bus: %d\n", err);
|
|
+ goto err_out_free_mdiobus;
|
|
+ }
|
|
+ hw->mii_bus = mii_bus;
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_out_free_mdiobus:
|
|
+ mdiobus_free(mii_bus);
|
|
+err_out:
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static void igb_enet_mii_remove(struct e1000_hw *hw)
|
|
+{
|
|
+ if (hw->mii_bus) {
|
|
+ mdiobus_unregister(hw->mii_bus);
|
|
+ mdiobus_free(hw->mii_bus);
|
|
+ }
|
|
+}
|
|
+#endif /* CONFIG_PHYLIB */
|
|
+
|
|
/**
|
|
* igb_probe - Device Initialization Routine
|
|
* @pdev: PCI device information struct
|
|
@@ -2645,6 +2766,13 @@
|
|
}
|
|
}
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
+
|
|
+#ifdef CONFIG_PHYLIB
|
|
+ /* create and register the mdio bus if using ext phy */
|
|
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
|
+ igb_enet_mii_init(pdev);
|
|
+#endif
|
|
+
|
|
return 0;
|
|
|
|
err_register:
|
|
@@ -2792,6 +2920,10 @@
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
+#ifdef CONFIG_PHYLIB
|
|
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
|
+ igb_enet_mii_remove(hw);
|
|
+#endif
|
|
#ifdef CONFIG_IGB_HWMON
|
|
igb_sysfs_exit(adapter);
|
|
#endif
|
|
@@ -3105,6 +3237,12 @@
|
|
if (!resuming)
|
|
pm_runtime_put(&pdev->dev);
|
|
|
|
+#ifdef CONFIG_PHYLIB
|
|
+ /* Probe and connect to PHY if using ext phy */
|
|
+ if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
|
|
+ igb_enet_mii_probe(netdev);
|
|
+#endif
|
|
+
|
|
/* start the watchdog. */
|
|
hw->mac.get_link_status = 1;
|
|
schedule_work(&adapter->watchdog_task);
|
|
@@ -7090,21 +7228,41 @@
|
|
static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct igb_adapter *adapter = netdev_priv(netdev);
|
|
+ struct e1000_hw *hw = &adapter->hw;
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
|
|
- if (adapter->hw.phy.media_type != e1000_media_type_copper)
|
|
+ if (adapter->hw.phy.media_type != e1000_media_type_copper &&
|
|
+ !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY:
|
|
- data->phy_id = adapter->hw.phy.addr;
|
|
+ data->phy_id = hw->phy.addr;
|
|
break;
|
|
case SIOCGMIIREG:
|
|
- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
|
|
- &data->val_out))
|
|
- return -EIO;
|
|
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
|
|
+ if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
|
|
+ data->reg_num & 0x1F,
|
|
+ &data->val_out))
|
|
+ return -EIO;
|
|
+ } else {
|
|
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
|
|
+ &data->val_out))
|
|
+ return -EIO;
|
|
+ }
|
|
break;
|
|
case SIOCSMIIREG:
|
|
+ if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
|
|
+ if (igb_write_reg_gs40g(hw, data->phy_id,
|
|
+ data->reg_num & 0x1F,
|
|
+ data->val_in))
|
|
+ return -EIO;
|
|
+ } else {
|
|
+ if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
|
|
+ data->val_in))
|
|
+ return -EIO;
|
|
+ }
|
|
+ break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|