openwrt

mr/openwrt

Go to file

John Crispin 0a8430bfab use netif_receive_skb on lantiq Signed-off-by: Luca Olivetti <luca@ventoso.org> SVN-Revision: 27410		2011-07-03 17:39:05 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	automatic subtarget enumaration	2011-07-03 17:38:23 +00:00
package	fixes dependencies of pjsip and ltq-vmmc	2011-07-03 17:38:52 +00:00
scripts	download.pl: cope with potential two-digit linux versions	2011-07-03 15:00:24 +00:00
target	use netif_receive_skb on lantiq	2011-07-03 17:39:05 +00:00
toolchain	eglibc: remove old versions	2011-07-02 09:47:00 +00:00
tools	tools: always build mpc, now that older gcc versions have been eliminated, fixes #9642	2011-07-02 10:49:15 +00:00
.gitignore	add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
rules.mk	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org