openwrt/target/linux/omap/patches-3.12/415-ASoC-davinci-mcasp-Remove-redundant-num-serializer-D.patch
Imre Kaloz dcae3ef009 refresh/rename patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38932
2013-11-27 12:34:41 +00:00

91 lines
3.1 KiB
Diff

From fdb8d3521ecae71865df66a84a1cbe13f7daa6f5 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 11:25:02 +0300
Subject: [PATCH 226/752] ASoC: davinci: mcasp: Remove redundant
num-serializer DT parameter
The serial-dir array gives this information so there is no need to have the
num-serializer property in DT description.
Just ignore the property in the driver the DTS files can be updated
separately without regression.
Update the documentation at the same time for davinci-mcasp
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
.../bindings/sound/davinci-mcasp-audio.txt | 8 +++----
sound/soc/davinci/davinci-mcasp.c | 22 +++++---------------
2 files changed, 8 insertions(+), 22 deletions(-)
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -13,10 +13,9 @@ Required properties:
good to keep "mpu" first in the list.
- op-mode : I2S/DIT ops mode.
- tdm-slots : Slots for TDM operation.
-- num-serializer : Serializers used by McASP.
-- serial-dir : A list of serializer pin mode. The list number should be equal
- to "num-serializer" parameter. Each entry is a number indication
- serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
+- serial-dir : A list of serializer configuration. Each entry is a number
+ indication serializer pin direction.
+ (0 - INACTIVE, 1 - TX, 2 - RX)
- dmas: two element list of DMA controller phandles and DMA request line
ordered pairs.
- dma-names: identifier string for each DMA request line in the dmas property.
@@ -45,7 +44,6 @@ mcasp0: mcasp0@1d00000 {
interrupts-names = "tx", "rx";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
- num-serializer = <16>;
serial-dir = <
0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */
0 0 0 0
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -1050,7 +1050,6 @@ static struct snd_platform_data *davinci
struct of_phandle_args dma_spec;
const u32 *of_serial_dir32;
- u8 *of_serial_dir;
u32 val;
int i, ret = 0;
@@ -1081,32 +1080,21 @@ static struct snd_platform_data *davinci
pdata->tdm_slots = val;
}
- ret = of_property_read_u32(np, "num-serializer", &val);
- if (ret >= 0)
- pdata->num_serializer = val;
-
of_serial_dir32 = of_get_property(np, "serial-dir", &val);
val /= sizeof(u32);
- if (val != pdata->num_serializer) {
- dev_err(&pdev->dev,
- "num-serializer(%d) != serial-dir size(%d)\n",
- pdata->num_serializer, val);
- ret = -EINVAL;
- goto nodata;
- }
-
if (of_serial_dir32) {
- of_serial_dir = devm_kzalloc(&pdev->dev,
- (sizeof(*of_serial_dir) * val),
- GFP_KERNEL);
+ u8 *of_serial_dir = devm_kzalloc(&pdev->dev,
+ (sizeof(*of_serial_dir) * val),
+ GFP_KERNEL);
if (!of_serial_dir) {
ret = -ENOMEM;
goto nodata;
}
- for (i = 0; i < pdata->num_serializer; i++)
+ for (i = 0; i < val; i++)
of_serial_dir[i] = be32_to_cpup(&of_serial_dir32[i]);
+ pdata->num_serializer = val;
pdata->serial_dir = of_serial_dir;
}