mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
19,222 Commits 3 Branches 0 Tags 517 MiB
C 90.8%
Makefile 4.4%
Shell 1.6%
Roff 1.5%
Perl 0.6%
Other 1%
1045c83527
Go to file
Gabor Juhos 1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
2012-01-04 17:30:47 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include add CT target and TTL/HL match+target 2012-01-04 02:52:54 +00:00
package package: remove the om2p-watchdog package 2012-01-04 17:30:42 +00:00
scripts scripts: add a script for generating fwupgrade config for the OM2P board 2011-12-01 22:49:03 +00:00
target ar71xx: add support for TP-Link TL-MR3020 2012-01-04 17:30:47 +00:00
toolchain disable UCLIBC_HAS_XLOCALE and UCLIB_HAS_GLIBC_DIGIT_GROUPING if BUILD_NLS is on (#10735) 2012-01-04 12:32:47 +00:00
tools firmware-utils/mktplinkfw: add support for TL-MR3020 2012-01-04 17:30:44 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in if CONFIG_BUILD_NLS is selected, compile uClibc with locale support 2012-01-01 15:11:11 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk rules.mk: provide a LIBGCC_A variable 2011-09-05 19:29:22 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org