350dd0f9ac
By default kobs-ng will use the size of /dev/mtd0 for the IMX bootstreams. This patch allows overriding that size in order to reserve space at the end of the mtd partition for u-boot.img in the case of using an SPL bootloader. For example, to flash an SPL bootloader that loads u-boot.img from 0xe0000 (14MB) offset in a 16MB /dev/mtd0: kobs-ng init -v -x --search_exponent=1 --chip_0_size=0xe00000 SPL nandwrite --start=0xe00000 --pad /dev/mtd0 u-boot.img Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40532
43 lines
1.4 KiB
Diff
43 lines
1.4 KiB
Diff
--- a/src/main.c
|
|
+++ b/src/main.c
|
|
@@ -94,6 +94,7 @@ void usage(void)
|
|
" [KOBS] boot structures config options\n"
|
|
" --chip_0_device_path=<path> .......... Device of boot (default /dev/mtd0)\n"
|
|
" --chip_1_device_path=<path> .......... The second chip in case of multichip NAND\n"
|
|
+ " --chip_0_size=<size> ................. Override size of chip_0 device\n"
|
|
" --search_exponent=<value> ............ NCB field (default 2)\n"
|
|
" --data_setup_time=<value> ............ NCB field (default 80)\n"
|
|
" --data_hold_time=<value> ............. NCB field (default 60)\n"
|
|
--- a/src/mtd.c
|
|
+++ b/src/mtd.c
|
|
@@ -716,6 +716,11 @@ struct mtd_data *mtd_open(const struct m
|
|
goto out;
|
|
}
|
|
|
|
+ /* override MTD size */
|
|
+ if (md->cfg.chip_0_size) {
|
|
+ miu->size = md->cfg.chip_0_size;
|
|
+ }
|
|
+
|
|
/* verify it's a nand */
|
|
if (miu->type != MTD_NANDFLASH) {
|
|
fprintf(stderr, "mtd: device %s not NAND\n", mp->name);
|
|
@@ -2914,7 +2919,7 @@ static const struct {
|
|
} mtd_int_args[] = {
|
|
ARG_IGNORE(chip_count),
|
|
ARG_IGNORE(chip_0_offset),
|
|
- ARG_IGNORE(chip_0_size),
|
|
+ ARG(chip_0_size),
|
|
ARG_IGNORE(chip_1_offset),
|
|
ARG_IGNORE(chip_1_size),
|
|
ARG(search_exponent),
|
|
@@ -3107,7 +3112,7 @@ void mtd_cfg_dump(struct mtd_config *cfg
|
|
// Pd(chip_count);
|
|
Ps(chip_0_device_path);
|
|
// Pd(chip_0_offset);
|
|
-// Pd(chip_0_size);
|
|
+ Pd(chip_0_size);
|
|
Ps(chip_1_device_path);
|
|
// Pd(chip_1_offset);
|
|
// Pd(chip_1_size);
|