openwrt

mr/openwrt

Go to file

Felix Fietkau 20937ce81a (5/6) bcm57xx: bcm4785 incomplete reboot I noticed my wrt350n would not reliably reboot after entering the reboot command. I found this code in the source for the wrt600n. It corrects the problem, and the wrt350n reboots reliably now. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> SVN-Revision: 11470		2008-06-15 11:10:43 +00:00
docs	fix a small dep bug in the docs/ dir	2008-06-09 15:38:23 +00:00
include	remove accidentally committed swap file	2008-06-13 15:29:07 +00:00
package	(4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered	2008-06-15 11:10:27 +00:00
scripts	use the european kernel.org mirror too	2008-06-12 14:48:32 +00:00
target	(5/6) bcm57xx: bcm4785 incomplete reboot	2008-06-15 11:10:43 +00:00
toolchain	finally fixes etrax toolchain problems, thanks nbd	2008-06-06 20:12:05 +00:00
tools	Added lua (lua host bytecode-compiler) to tools/	2008-05-30 18:38:14 +00:00
.gitignore	update svn:ignore and .gitignore	2008-06-06 19:04:01 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	adds missing patch for native toolchain	2008-06-10 07:18:41 +00:00
feeds.conf	Switched xwrt url in feeds.conf (berlios http falls over occasionally)	2008-03-02 22:07:46 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	large improvement for parallel builds. works without V=99 now and without warnings. tested with -j on an 2x dual core opteron machine	2008-06-09 15:38:45 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
rules.mk	adds missing patch for native toolchain	2008-06-10 07:18:41 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org