mr/openwrt
2
0
Fork 1
Code Issues 7 Pull Requests Releases Wiki Activity
3120c9c9c2
openwrt/target/linux/bcm53xx/patches-3.14/003-mtd-spi-nor-from-3.19.patch
Rafał Miłecki e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
2014-12-17 14:53:25 +00:00

663 lines
19 KiB
Diff
Raw Blame History

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -26,7 +26,38 @@
/* Define max times to check status register before we give up. */
#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
-#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
+#define SPI_NOR_MAX_ID_LEN 6
+
+struct flash_info {
+ /*
+ * This array stores the ID bytes.
+ * The first three bytes are the JEDIC ID.
+ * JEDEC ID zero means "no ID" (mostly older chips).
+ */
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ u8 id_len;
+
+ /* The size listed here is what works with SPINOR_OP_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned sector_size;
+ u16 n_sectors;
+
+ u16 page_size;
+ u16 addr_width;
+
+ u16 flags;
+#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
+#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
+#define SST_WRITE 0x04 /* use SST byte programming */
+#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
+#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
+#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
+#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
+#define USE_FSR 0x80 /* use flag status register */
+};
+
+#define JEDEC_MFR(info) ((info)->id[0])
static const struct spi_device_id *spi_nor_match_id(const char *name);
@@ -98,7 +129,7 @@ static inline int spi_nor_read_dummy_cyc
case SPI_NOR_FAST:
case SPI_NOR_DUAL:
case SPI_NOR_QUAD:
- return 1;
+ return 8;
case SPI_NOR_NORMAL:
return 0;
}
@@ -138,13 +169,14 @@ static inline struct spi_nor *mtd_to_spi
}
/* Enable/disable 4-byte addressing mode. */
-static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
+static inline int set_4byte(struct spi_nor *nor, struct flash_info *info,
+ int enable)
{
int status;
bool need_wren = false;
u8 cmd;
- switch (JEDEC_MFR(jedec_id)) {
+ switch (JEDEC_MFR(info)) {
case CFI_MFR_ST: /* Micron, actually */
/* Some Micron need WREN command; all will accept it */
need_wren = true;
@@ -165,81 +197,74 @@ static inline int set_4byte(struct spi_n
return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0);
}
}
-
-static int spi_nor_wait_till_ready(struct spi_nor *nor)
+static inline int spi_nor_sr_ready(struct spi_nor *nor)
{
- unsigned long deadline;
- int sr;
-
- deadline = jiffies + MAX_READY_WAIT_JIFFIES;
-
- do {
- cond_resched();
+ int sr = read_sr(nor);
+ if (sr < 0)
+ return sr;
+ else
+ return !(sr & SR_WIP);
+}
- sr = read_sr(nor);
- if (sr < 0)
- break;
- else if (!(sr & SR_WIP))
- return 0;
- } while (!time_after_eq(jiffies, deadline));
+static inline int spi_nor_fsr_ready(struct spi_nor *nor)
+{
+ int fsr = read_fsr(nor);
+ if (fsr < 0)
+ return fsr;
+ else
+ return fsr & FSR_READY;
+}
- return -ETIMEDOUT;
+static int spi_nor_ready(struct spi_nor *nor)
+{
+ int sr, fsr;
+ sr = spi_nor_sr_ready(nor);
+ if (sr < 0)
+ return sr;
+ fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
+ if (fsr < 0)
+ return fsr;
+ return sr && fsr;
}
-static int spi_nor_wait_till_fsr_ready(struct spi_nor *nor)
+/*
+ * Service routine to read status register until ready, or timeout occurs.
+ * Returns non-zero if error.
+ */
+static int spi_nor_wait_till_ready(struct spi_nor *nor)
{
unsigned long deadline;
- int sr;
- int fsr;
+ int timeout = 0, ret;
deadline = jiffies + MAX_READY_WAIT_JIFFIES;
- do {
+ while (!timeout) {
+ if (time_after_eq(jiffies, deadline))
+ timeout = 1;
+
+ ret = spi_nor_ready(nor);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ return 0;
+
cond_resched();
+ }
- sr = read_sr(nor);
- if (sr < 0) {
- break;
- } else if (!(sr & SR_WIP)) {
- fsr = read_fsr(nor);
- if (fsr < 0)
- break;
- if (fsr & FSR_READY)
- return 0;
- }
- } while (!time_after_eq(jiffies, deadline));
+ dev_err(nor->dev, "flash operation timed out\n");
return -ETIMEDOUT;
}
/*
- * Service routine to read status register until ready, or timeout occurs.
- * Returns non-zero if error.
- */
-static int wait_till_ready(struct spi_nor *nor)
-{
- return nor->wait_till_ready(nor);
-}
-
-/*
* Erase the whole flash memory
*
* Returns 0 if successful, non-zero otherwise.
*/
static int erase_chip(struct spi_nor *nor)
{
- int ret;
-
dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- return ret;
-
- /* Send write enable, then erase commands. */
- write_enable(nor);
-
return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
}
@@ -294,11 +319,17 @@ static int spi_nor_erase(struct mtd_info
/* whole-chip erase? */
if (len == mtd->size) {
+ write_enable(nor);
+
if (erase_chip(nor)) {
ret = -EIO;
goto erase_err;
}
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
+
/* REVISIT in some cases we could speed up erasing large regions
* by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up
* to use "small sector erase", but that's not always optimal.
@@ -307,6 +338,8 @@ static int spi_nor_erase(struct mtd_info
/* "sector"-at-a-time erase */
} else {
while (len) {
+ write_enable(nor);
+
if (nor->erase(nor, addr)) {
ret = -EIO;
goto erase_err;
@@ -314,9 +347,15 @@ static int spi_nor_erase(struct mtd_info
addr += mtd->erasesize;
len -= mtd->erasesize;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
}
}
+ write_disable(nor);
+
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
instr->state = MTD_ERASE_DONE;
@@ -341,11 +380,6 @@ static int spi_nor_lock(struct mtd_info
if (ret)
return ret;
- /* Wait until finished previous command */
- ret = wait_till_ready(nor);
- if (ret)
- goto err;
-
status_old = read_sr(nor);
if (offset < mtd->size - (mtd->size / 2))
@@ -388,11 +422,6 @@ static int spi_nor_unlock(struct mtd_inf
if (ret)
return ret;
- /* Wait until finished previous command */
- ret = wait_till_ready(nor);
- if (ret)
- goto err;
-
status_old = read_sr(nor);
if (offset+len > mtd->size - (mtd->size / 64))
@@ -424,38 +453,34 @@ err:
return ret;
}
-struct flash_info {
- /* JEDEC id zero means "no ID" (most older chips); otherwise it has
- * a high byte of zero plus three data bytes: the manufacturer id,
- * then a two byte device id.
- */
- u32 jedec_id;
- u16 ext_id;
-
- /* The size listed here is what works with SPINOR_OP_SE, which isn't
- * necessarily called a "sector" by the vendor.
- */
- unsigned sector_size;
- u16 n_sectors;
-
- u16 page_size;
- u16 addr_width;
-
- u16 flags;
-#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
-#define SST_WRITE 0x04 /* use SST byte programming */
-#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
-#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
-#define USE_FSR 0x80 /* use flag status register */
-};
-
+/* Used when the "_ext_id" is two bytes at most */
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
((kernel_ulong_t)&(struct flash_info) { \
- .jedec_id = (_jedec_id), \
- .ext_id = (_ext_id), \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
+ .sector_size = (_sector_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = 256, \
+ .flags = (_flags), \
+ })
+
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+ ((kernel_ulong_t)&(struct flash_info) { \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 16) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = 6, \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
@@ -507,6 +532,9 @@ static const struct spi_device_id spi_no
{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ /* Fujitsu */
+ { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
+
/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
@@ -532,6 +560,7 @@ static const struct spi_device_id spi_no
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
/* Micron */
+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
{ "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
@@ -556,6 +585,7 @@ static const struct spi_device_id spi_no
{ "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
+ { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) },
{ "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) },
{ "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
@@ -577,6 +607,7 @@ static const struct spi_device_id spi_no
{ "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) },
{ "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) },
{ "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
+ { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
/* ST Microelectronics -- newer production may have feature updates */
{ "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
@@ -588,7 +619,6 @@ static const struct spi_device_id spi_no
{ "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
{ "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
{ "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
{ "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
{ "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
@@ -643,32 +673,24 @@ static const struct spi_device_id spi_no
static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
{
int tmp;
- u8 id[5];
- u32 jedec;
- u16 ext_jedec;
+ u8 id[SPI_NOR_MAX_ID_LEN];
struct flash_info *info;
- tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5);
+ tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
return ERR_PTR(tmp);
}
- jedec = id[0];
- jedec = jedec << 8;
- jedec |= id[1];
- jedec = jedec << 8;
- jedec |= id[2];
-
- ext_jedec = id[3] << 8 | id[4];
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
info = (void *)spi_nor_ids[tmp].driver_data;
- if (info->jedec_id == jedec) {
- if (info->ext_id == 0 || info->ext_id == ext_jedec)
+ if (info->id_len) {
+ if (!memcmp(info->id, id, info->id_len))
return &spi_nor_ids[tmp];
}
}
- dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec);
+ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n",
+ id[0], id[1], id[2]);
return ERR_PTR(-ENODEV);
}
@@ -703,11 +725,6 @@ static int sst_write(struct mtd_info *mt
if (ret)
return ret;
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- goto time_out;
-
write_enable(nor);
nor->sst_write_second = false;
@@ -719,7 +736,7 @@ static int sst_write(struct mtd_info *mt
/* write one byte. */
nor->write(nor, to, 1, retlen, buf);
- ret = wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
if (ret)
goto time_out;
}
@@ -731,7 +748,7 @@ static int sst_write(struct mtd_info *mt
/* write two bytes. */
nor->write(nor, to, 2, retlen, buf + actual);
- ret = wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
if (ret)
goto time_out;
to += 2;
@@ -740,7 +757,7 @@ static int sst_write(struct mtd_info *mt
nor->sst_write_second = false;
write_disable(nor);
- ret = wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
if (ret)
goto time_out;
@@ -751,7 +768,7 @@ static int sst_write(struct mtd_info *mt
nor->program_opcode = SPINOR_OP_BP;
nor->write(nor, to, 1, retlen, buf + actual);
- ret = wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
if (ret)
goto time_out;
write_disable(nor);
@@ -779,11 +796,6 @@ static int spi_nor_write(struct mtd_info
if (ret)
return ret;
- /* Wait until finished previous write command. */
- ret = wait_till_ready(nor);
- if (ret)
- goto write_err;
-
write_enable(nor);
page_offset = to & (nor->page_size - 1);
@@ -802,16 +814,20 @@ static int spi_nor_write(struct mtd_info
if (page_size > nor->page_size)
page_size = nor->page_size;
- wait_till_ready(nor);
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto write_err;
+
write_enable(nor);
nor->write(nor, to + i, page_size, retlen, buf + i);
}
}
+ ret = spi_nor_wait_till_ready(nor);
write_err:
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
- return 0;
+ return ret;
}
static int macronix_quad_enable(struct spi_nor *nor)
@@ -824,7 +840,7 @@ static int macronix_quad_enable(struct s
nor->cmd_buf[0] = val | SR_QUAD_EN_MX;
nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
- if (wait_till_ready(nor))
+ if (spi_nor_wait_till_ready(nor))
return 1;
ret = read_sr(nor);
@@ -874,11 +890,11 @@ static int spansion_quad_enable(struct s
return 0;
}
-static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
+static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
{
int status;
- switch (JEDEC_MFR(jedec_id)) {
+ switch (JEDEC_MFR(info)) {
case CFI_MFR_MACRONIX:
status = macronix_quad_enable(nor);
if (status) {
@@ -904,11 +920,6 @@ static int spi_nor_check(struct spi_nor
return -EINVAL;
}
- if (!nor->read_id)
- nor->read_id = spi_nor_read_id;
- if (!nor->wait_till_ready)
- nor->wait_till_ready = spi_nor_wait_till_ready;
-
return 0;
}
@@ -926,16 +937,24 @@ int spi_nor_scan(struct spi_nor *nor, co
if (ret)
return ret;
- id = spi_nor_match_id(name);
- if (!id)
+ /* Try to auto-detect if chip name wasn't specified */
+ if (!name)
+ id = spi_nor_read_id(nor);
+ else
+ id = spi_nor_match_id(name);
+ if (IS_ERR_OR_NULL(id))
return -ENOENT;
info = (void *)id->driver_data;
- if (info->jedec_id) {
+ /*
+ * If caller has specified name of flash model that can normally be
+ * detected using JEDEC, let's verify it.
+ */
+ if (name && info->id_len) {
const struct spi_device_id *jid;
- jid = nor->read_id(nor);
+ jid = spi_nor_read_id(nor);
if (IS_ERR(jid)) {
return PTR_ERR(jid);
} else if (jid != id) {
@@ -960,9 +979,9 @@ int spi_nor_scan(struct spi_nor *nor, co
* up with the software protection bits set
*/
- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
- JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
- JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
+ if (JEDEC_MFR(info) == CFI_MFR_ATMEL ||
+ JEDEC_MFR(info) == CFI_MFR_INTEL ||
+ JEDEC_MFR(info) == CFI_MFR_SST) {
write_enable(nor);
write_sr(nor, 0);
}
@@ -977,7 +996,7 @@ int spi_nor_scan(struct spi_nor *nor, co
mtd->_read = spi_nor_read;
/* nor protection support for STmicro chips */
- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
+ if (JEDEC_MFR(info) == CFI_MFR_ST) {
mtd->_lock = spi_nor_lock;
mtd->_unlock = spi_nor_unlock;
}
@@ -988,9 +1007,8 @@ int spi_nor_scan(struct spi_nor *nor, co
else
mtd->_write = spi_nor_write;
- if ((info->flags & USE_FSR) &&
- nor->wait_till_ready == spi_nor_wait_till_ready)
- nor->wait_till_ready = spi_nor_wait_till_fsr_ready;
+ if (info->flags & USE_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
/* prefer "small sector" erase if possible */
@@ -1031,7 +1049,7 @@ int spi_nor_scan(struct spi_nor *nor, co
/* Quad/Dual-read mode takes precedence over fast/normal */
if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
- ret = set_quad_mode(nor, info->jedec_id);
+ ret = set_quad_mode(nor, info);
if (ret) {
dev_err(dev, "quad mode not supported\n");
return ret;
@@ -1067,7 +1085,7 @@ int spi_nor_scan(struct spi_nor *nor, co
else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
+ if (JEDEC_MFR(info) == CFI_MFR_AMD) {
/* Dedicated 4-byte command set */
switch (nor->flash_read) {
case SPI_NOR_QUAD:
@@ -1088,7 +1106,7 @@ int spi_nor_scan(struct spi_nor *nor, co
nor->erase_opcode = SPINOR_OP_SE_4B;
mtd->erasesize = info->sector_size;
} else
- set_4byte(nor, info->jedec_id, 1);
+ set_4byte(nor, info, 1);
} else {
nor->addr_width = 3;
}
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -116,6 +116,10 @@ enum spi_nor_ops {
SPI_NOR_OPS_UNLOCK,
};
+enum spi_nor_option_flags {
+ SNOR_F_USE_FSR = BIT(0),
+};
+
/**
* struct spi_nor - Structure for defining a the SPI NOR layer
* @mtd: point to a mtd_info structure
@@ -129,6 +133,7 @@ enum spi_nor_ops {
* @program_opcode: the program opcode
* @flash_read: the mode of the read
* @sst_write_second: used by the SST write operation
+ * @flags: flag options for the current SPI-NOR (SNOR_F_*)
* @cfg: used by the read_xfer/write_xfer
* @cmd_buf: used by the write_reg
* @prepare: [OPTIONAL] do some preparations for the
@@ -139,9 +144,6 @@ enum spi_nor_ops {
* @write_xfer: [OPTIONAL] the writefundamental primitive
* @read_reg: [DRIVER-SPECIFIC] read out the register
* @write_reg: [DRIVER-SPECIFIC] write data to the register
- * @read_id: [REPLACEABLE] read out the ID data, and find
- * the proper spi_device_id
- * @wait_till_ready: [REPLACEABLE] wait till the NOR becomes ready
* @read: [DRIVER-SPECIFIC] read data from the SPI NOR
* @write: [DRIVER-SPECIFIC] write data to the SPI NOR
* @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR
@@ -160,6 +162,7 @@ struct spi_nor {
u8 program_opcode;
enum read_mode flash_read;
bool sst_write_second;
+ u32 flags;
struct spi_nor_xfer_cfg cfg;
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
@@ -172,8 +175,6 @@ struct spi_nor {
int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
int write_enable);
- const struct spi_device_id *(*read_id)(struct spi_nor *nor);
- int (*wait_till_ready)(struct spi_nor *nor);
int (*read)(struct spi_nor *nor, loff_t from,
size_t len, size_t *retlen, u_char *read_buf);
Reference in New Issue View Git Blame Copy Permalink